6.5prc loaded nk diameter

[6brshooter]

My Smith wanted to order a 6.5prc reamer, .150 freebore and slightly tighter nk than saami .299. My loaded hornady brass is .2915-.292. I've heard adg is thicker, but also wondered what newer or older hornady brass measured? If you've got some and don't mind measuring, I sure would appreciate it. Fwiw, he was thinking .295 or .297, not tight nk but just enough to not overwork nk in resizing. Thanks.

 

[Ajrich]

My Smith wanted to order a 6.5prc reamer, .150 freebore and slightly tighter nk than saami .299. My loaded hornady brass is .2915-.292. I've heard adg is thicker, but also wondered what newer or older hornady brass measured? If you've got some and don't mind measuring, I sure would appreciate it. Fwiw, he was thinking .295 or .297, not tight nk but just enough to not overwork nk in resizing. Thanks.

My Adg is .293 and hornady is .292.
I

 

[Ajrich]

My hornady brass is from when it first became available.

 

[Sprayed99]

factory Hornady from 3 different lots is .292

My ADG loads are .294

My Gunwerks brass loads are .2935