Accuracy International AT-X

mindekei

Private
Minuteman
Jan 17, 2019
37
18
UK rifle come with comp trigger and harder spring. Any source where to get lighter spring for comp trigger?
 

bimbi2075

Private
Minuteman
Jun 21, 2020
5
27
UK rifle come with comp trigger and harder spring. Any source where to get lighter spring for comp trigger?
UK rifle come with comp trigger and harder spring. Any source where to get lighter spring for comp trigger?
Hi, I‘ve also an UK rifle, the light spring was included in the bag with the trigger manual and the Allen keys.
 

Bucket

Private
Full Member
Minuteman
Apr 29, 2013
52
38
Sydney Australia
Nice 👍🏼, Can get the AO out here ay? Finally have hit the shores now 2-3 weeks in customs, so the wait hopefully nearly over 🤞🏼
So we should be putting in our PTA's???? Or wait 'til they get to our LGS??.............................
Thinking I'm gonna wait.
 

Heffo

Sergeant of the Hide
Full Member
Minuteman
Mar 18, 2018
221
271
NSW Australia
So we should be putting in our PTA's???? Or wait 'til they get to our LGS??.............................
Thinking I'm gonna wait.
Danny said put it in mate. He’s very confident only 2-3 weeks. They are here now in Australia. I have one that runs out 28 July 🙏🏼. They are quick atm anyway…..week or two!
 
  • Like
Reactions: Bucket

4O6shootist

It was the wind!
Supporter
Full Member
Minuteman
Supporter+
Sep 5, 2021
1,083
580
Montana
What size metric long shank drivers do I need for my atx to disassemble everything? My fixit stix.....can't break it down as I can't get to a lot the deep set socket cap screws.
 

Rhed

Sergeant of the Hide
Full Member
Minuteman
Apr 12, 2018
380
292
I jumped ship to an AX and ordered an AO chassis in the end.
I did the same too. Only I didn’t put down for a ATX. I wanted a ATX for my first AI. But being that lead times was too long, I settled for a new AX instead. AO? Well I have to at least beat the crap out of the OG AX chassis first since it’s new. Besides, it’s like tank built. And in ES..
 
  • Like
Reactions: Krob95

generalzip

Old Salt
Full Member
Minuteman
Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    Does anyone know how much height the high rail adds over the stock low rail? I bought a bridge and have a TigOR-6z+ that comes with 36. 38 (1.5”), and 39mm (1.54”) height mounts. It also will accept some offset as long as it’s collimated.wondering if I could get away with the 36mm mount. I use a 1.5” spuhr 4002
     

    Huskydriver

    Not here for a long time but here for a good time
    Full Member
    Minuteman
    Apr 17, 2018
    6,489
    12,154
    SLC, Utah
    Does anyone know how much height the high rail adds over the stock low rail? I bought a bridge and have a TigOR-6z+ that comes with 36. 38 (1.5”), and 39mm (1.54”) height mounts. It also will accept some offset as long as it’s collimated.wondering if I could get away with the 36mm mount. I use a 1.5” spuhr 4002
    If your action rail and night vision rail are coplanar then it doesn't matter how high the rail is... If your day optic is 1.5 you should be using a 1.5 nvg mount
     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    If your action rail and night vision rail are coplanar then it doesn't matter how high the rail is... If your day optic is 1.5 you should be using a 1.5 nvg mount
    Sorry should have been more clear. I have the stock low action rail. Trying to get away with not installing a high one. But I can get lower mounts for the TigIR to compensate for the low action rail. Hence my question of asking the height difference. I’d say the difference is 2mm then I can simply use the 36mm mount. If it’s 4mm I can buy a 34mm mounting plate etc
     

    Huskydriver

    Not here for a long time but here for a good time
    Full Member
    Minuteman
    Apr 17, 2018
    6,489
    12,154
    SLC, Utah
    Sorry should have been more clear. I have the stock low action rail. Trying to get away with not installing a high one. But I can get lower mounts for the TigIR to compensate for the low action rail. Hence my question of asking the height difference. I’d say the difference is 2mm then I can simply use the 36mm mount. If it’s 4mm I can buy a 34mm mounting plate etc

    To that I say.....

    download.jpeg
     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    Also what’s the part number for a full length 20 moa rail for the full ATX bridge?

    Edit: does AI make a short rail section that’s 20 moa to match the factory rail slope pitch? I don’t need and would prefer not to have unnecessary extra weight of a full length top rail
     

    deersniper

    What would Burt do?
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Feb 22, 2007
    13,796
    19,767
    Northeast
    Also what’s the part number for a full length 20 moa rail for the full ATX bridge?

    Edit: does AI make a short rail section that’s 20 moa to match the factory rail slope pitch? I don’t need and would prefer not to have unnecessary extra weight of a full length top rail

    668D19E9-E724-4288-BB4D-9034C240C29A.jpeg


    FD20C769-F6F1-4AB4-996D-4DA6AAD0EC20.jpeg
     

    Tritiumdials

    Sergeant of the Hide
    Full Member
    Minuteman
    Aug 29, 2020
    499
    510
    CONUS
    Lol it’s not about being poor. It’s about the PITA to break it apart and retain the factor bond and recoil lug for the rail. AI seemed to overtighten a lot of the screws on my Gun already to the point of stripping them.
    I heated the crap out of the hardware and broke the thread locker bond by using a cheap bit to lightly hammer the screws.

    Purchasing this below will include the correct hardware and recoil lug/pin:

     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx

    SHGronk

    Private
    Minuteman
    Jul 28, 2019
    78
    104
    Anyone know if the standard AI fasteners (quicklock barrel retention capscrew as an example) are just black oxide finish or something more fancy?
     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    Anyone know if the standard AI fasteners (quicklock barrel retention capscrew as an example) are just black oxide finish or something more fancy?
    They appear just black oxide. Nothing crazy. The black oxide screws (carbon steel) are usually the hardest commonly available commercial grade small screws.
     

    blbennett1288

    Rivet
    Full Member
    Minuteman
    Supporter+
  • Apr 24, 2017
    2,952
    3,095
    Hoover, Alabama
    Also what’s the part number for a full length 20 moa rail for the full ATX bridge?

    Edit: does AI make a short rail section that’s 20 moa to match the factory rail slope pitch? I don’t need and would prefer not to have unnecessary extra weight of a full length top rail
    No, they do not make anything that matches the low action rail.

    Another option, which I did, was use the AT high action rail with the AT 20moa NVG bridge rail.
     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    Sounds like this AT 20 moa rail would be the best bet and pretty much exactly what I’m looking for. Will try it out with the low action rail. Apparently the TIG-IR is pretty forgiving with height. I’ll collimate it and shoot it out to 500 dialing to see how it works before I go on the science project if swapping action rails. Thanks!
     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    Is the accessory rail taller than the NVG/forend rail? I assume the forend rail and AT NVG rails are the same thickness?
     

    generalzip

    Old Salt
    Full Member
    Minuteman
    Supporter+
  • Jun 30, 2010
    2,537
    807
    32
    Houston, tx
    They appear just black oxide. Nothing crazy. The black oxide screws (carbon steel) are usually the hardest commonly available commercial grade small screws.

    The accessory rails are about the same height as the AT 20moa nvg rail. The accessory rails are shorter than the ATX full length 20moa rail.
    Good info thanks man! My clip on is pretty small so don’t need a lot of rail real estate. I’ve got some linger accessory rails that would work too but I’ve got a feeling that the 0moa of the accessory rail may cause issues with the clip on and the 20 moa factory action rail
     

    Commander Shepard

    Sergeant of the Hide
    Full Member
    Minuteman
    Aug 3, 2004
    279
    99
    NC
    Purchasing this below will include the correct hardware and recoil lug/pin:

    Not in my experience. My AT-X high action rail came with no recoil lugs and the attachment screws were way too long.

    My recommendation is to still go with the AT-X high action rail, swap the recoil lugs over, and use the corresponding AT-X 20MOA NV rail. Doing anything else just increases the number of potential sources of error.
     

    Attachments

    • EF99ED66-BF46-4D4D-8E2D-AF5E1C0AF2FE.jpeg
      EF99ED66-BF46-4D4D-8E2D-AF5E1C0AF2FE.jpeg
      253.2 KB · Views: 68
    • ED2B62FA-E62B-42CE-83EE-33086473AE3F.jpeg
      ED2B62FA-E62B-42CE-83EE-33086473AE3F.jpeg
      199 KB · Views: 63
    Last edited:

    just browsing

    just enough to be dangerous
    Full Member
    Minuteman
    Supporter+
  • Feb 18, 2017
    1,618
    1,494
    NE PA
    I know I saw it earlier in the thread, but I’m too lazy to look… what’s the lightest config y’all are getting out of these with a carbon barrels or similar?

    Obviously dependent on scope, accessories, etc. but any hope for Open Heavy Hunter class?
     
    • Haha
    Reactions: Huskydriver

    Covertnoob5

    Supporter
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Feb 12, 2017
    2,497
    1,556
    SoCal
    I know I saw it earlier in the thread, but I’m too lazy to look… what’s the lightest config y’all are getting out of these with a carbon barrels or similar?

    Obviously dependent on scope, accessories, etc. but any hope for Open Heavy Hunter class?
    Not an ATX but it’s possible. I’ve seen team AI guys run open heavy at the NRLH finale last year with an ATX. Nx8 4-32 and tbac bipod.
    9992FADD-311B-40F9-8672-F5408FF7577F.jpeg
     

    deersniper

    What would Burt do?
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Feb 22, 2007
    13,796
    19,767
    Northeast
    Atx Specs say 13 pounds ?

    Should be plenty of budget fkr scope and bipod especially with a fiber barrel
     

    just browsing

    just enough to be dangerous
    Full Member
    Minuteman
    Supporter+
  • Feb 18, 2017
    1,618
    1,494
    NE PA
    Atx Specs say 13 pounds? Should be plenty of budget fkr scope and bipod especially with a fiber barrel
    Yes, but it’d probably get a little squirrelly with a suppressor (since I’m civilized) and depending on chassis accoutrements (folder, NV bridge, etc.). I understand all of that is remedied by removing stuff, but was more interested to see if anyone had set one up one similarly and what it weighed in at.
     

    Tritiumdials

    Sergeant of the Hide
    Full Member
    Minuteman
    Aug 29, 2020
    499
    510
    CONUS
    Not in my experience. My AT-X high action rail came with no recoil lugs and the attachment screws were way too long.

    My recommendation is to still go with the AT-X high action rail, swap the recoil lugs over, and use the corresponding AT-X 20MOA NV rail. Doing anything else just increases the number of potential sources of error.
    Because you probably ordered AI-29394BL and not the one I linked.
     

    4O6shootist

    It was the wind!
    Supporter
    Full Member
    Minuteman
    Supporter+
    Sep 5, 2021
    1,083
    580
    Montana
    I know I saw it earlier in the thread, but I’m too lazy to look… what’s the lightest config y’all are getting out of these with a carbon barrels or similar?

    Obviously dependent on scope, accessories, etc. but any hope for Open Heavy Hunter class?
    I know my rifle which has a zco420, heavy ass unimount, mirage shield, barrel tuner and supressor, Ckyepod weighs 20#. Remove the tuner/can in favor of a titanium brake, cuts a pound, run a carbon barrel, cut 2.5 more. That puts me a half # over open heavy. Switch to a sub 2# optic in lighter rings you'll make weight. The rifle will be very ass heavy. My rifle config at 20# with can tuner and Ckyepod oit front balances perfectly in front of mag well.
     
    Last edited:

    NoLegs24

    Wheels
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Aug 15, 2013
    1,954
    3,567
    San Diego, CA
    What’s the re-sale value like on the at-x’s?
    It’s going to be hard to compete with these sweet prices

     

    blbennett1288

    Rivet
    Full Member
    Minuteman
    Supporter+
  • Apr 24, 2017
    2,952
    3,095
    Hoover, Alabama
    What’s the re-sale value like on the at-x’s?
    As @NoLegs24 already pointed out @MNTC has them for $4670. There was one that sold a couple weeks back with 2 barrels for $4375. There was one for $7k but it came with a custom camo, weights, magazines, 2 barrels, and a AXSR rear end.


     
    Last edited: