Aren’t these single shot / single feed? Ie can’t be converted to magazine….?
They are but they're pretty easy to machine out and then you're off to the races assuming you can find an action to put it in.Aren’t these single shot / single feed? Ie can’t be converted to magazine….?
That was the hope by posting here too, my thought was that people were more likely to see it here even if they weren't actively looking to sell. I don't know what the import rules are either so fingers crossed I'll find someone localDoes this action have the same footprint as the AT/AW/AX308? If so, and you know it’ll fit the current chassis design, your best bet is probably a WTB ad in the PX to see if you can find someone in the UK who has converted to the AO/V chassis and has the old AI chassis laying around.
There have been quite a few over the past years from people who have upgraded, but I’m not sure on the ability to ship a chassis from the US to the UK without an importer.
Anything is possible with a 7th axis CNC and a welder.Aren’t these single shot / single feed? Ie can’t be converted to magazine….?
I completely agree, but I don't know what's worse: taking the knife to a perfectly functional piece of art and history or leaving it to gather dust and become obsolete.Excellent. Well if it can be done, Jack is a man to do it. I had a McMillan stock in-letted by him. His attention to detail is seldom seen anymore.
I’m undecided if it’s sacrilege or not doing it to the coopermatch. But who’s anyone to say!
Good luck with the project.
Anything is possible with a 7th axis CNC and a welder.
Personally, I would just leave it as is.
Shoot, and I have exactly what you need sitting in my basement, never to be used again... Just that silly body of water between us.That was the hope by posting here too, my thought was that people were more likely to see it here even if they weren't actively looking to sell. I don't know what the import rules are either so fingers crossed I'll find someone local
I might know a guy that knows a guy that might or might not be upgrading his AI that might or might not be an AT to a Vision Chassis in the next few weeksCry for help to my UK peers - I'm looking to convert an AI coopermatch Palma-Master to take a magazine and need a AI short action chassis to put it into, I know the Accuracy obsession Vision chassis would work but at £1800 that's a bit rich for my blood. Any short action should be compatible AW, AT, or ATX I'm told.
I'm hoping someone has a line on one or perhaps has one left over from a Vision upgrade they'd be willing to let go of.
I've spoken to Valkyrie Rifles, JR firearms, Bradley Arms, Sporting services, who can't help, as well as Dolphin, and R and F sporting supplies about a custom chassis without success.View attachment 8194028
Could someone make that stock take mags? That would be pretty coolCry for help to my UK peers - I'm looking to convert an AI coopermatch Palma-Master to take a magazine and need a AI short action chassis to put it into, I know the Accuracy obsession Vision chassis would work but at £1800 that's a bit rich for my blood. Any short action should be compatible AW, AT, or ATX I'm told.
I'm hoping someone has a line on one or perhaps has one left over from a Vision upgrade they'd be willing to let go of.
I've spoken to Valkyrie Rifles, JR firearms, Bradley Arms, Sporting services, who can't help, as well as Dolphin, and R and F sporting supplies about a custom chassis without success.View attachment 8194028
this rifle is always beautiful.. I can't wait to see it again and to have a beer together..see ya broThe last two months have been a lot of work moving from Las Vegas to Dallas, but i'm getting settled in and finally got my AT out of it's burrow for the first time since being here. lol
View attachment 8193035
Cry for help to my UK peers - I'm looking to convert an AI coopermatch Palma-Master to take a magazine and need a AI short action chassis to put it into, I know the Accuracy obsession Vision chassis would work but at £1800 that's a bit rich for my blood. Any short action should be compatible AW, AT, or ATX I'm told.
I'm hoping someone has a line on one or perhaps has one left over from a Vision upgrade they'd be willing to let go of.
I've spoken to Valkyrie Rifles, JR firearms, Bradley Arms, Sporting services, who can't help, as well as Dolphin, and R and F sporting supplies about a custom chassis without success.View attachment 8194028
I wonder why the ASR has a different cut on the left side of the action than the standard AXSR does. Anyone know why?Ran 100 rounds through a new 6.5 Creedmoor for the AXSR and also put a few rounds of 300NM on plates. Special guest appearance by the AT-X wearing a 6 Dasher barrel.
View attachment 8197811
View attachment 8197814
I completely agree, but I don't know what's worse: taking the knife to a perfectly functional piece of art and history or leaving it to gather dust and become obsolete.
The action is like greased glass and its in fantastic shape - it'd be a shame if it wasn't used!
Yep the magazine versions were called CISMmasters and Swissmasters, but they weren't all stamped with those nicknames. Btw if you were to cut out a hole for a magazine into a Palmamaster for a PRS stock but you still occasionally want to shoot the wooden stock, you'd have to modify it as it's probably only got 4 clearance holes for the front and middle pair of screw holes on the action - cutting out a hole for a magazine cuts through the middle screw holes so you're left with only the front and rear screw holes like modern AIs.See them being used at Bisley, Blair Atholl and Kingsbury ranges Some in their original stocks others updated into modern Target Rifle stocks. There are ones with the mag fitting but they are really rare. It would be a real shame to butcher one of Mr Cooper's originals. Stick some iron sights on it and get stuck in.
I'm still trying to source a short action AI stock for it, but Jack from JR rifles has done the cut outs before without issue (photos of his work above, and the underside of my Palmamaster attached) so I'm hopeful it won't be a problem.Yep the magazine versions were called CISMmasters and Swissmasters, but they weren't all stamped with those nicknames. Btw if you were to cut out a hole for a magazine into a Palmamaster for a PRS stock but you still occasionally want to shoot the wooden stock, you'd have to modify it as it's probably only got 4 clearance holes for the front and middle pair of screw holes on the action - cutting out a hole for a magazine cuts through the middle screw holes so you're left with only the front and rear screw holes like modern AIs.
This post of a magazine version is pretty cool. https://www.snipershide.com/shooting/threads/accuracy-international-coopermatch.7041598/
What did this guy do to get banned so quickly? Asking only because I think he shoots at Quantico, seem to recall him doing mag dumps.Way to shoot insults at people trying to help you
I shoot an AI. If I was ranked it would be much higher than 300
A lot of AI shooters where I come from.
Just picked this up cause holding wind is for posers
View attachment 8190709
What did this guy do to get banned so quickly? Asking only because I think he shoots at Quantico, seem to recall him doing mag dumps.
I need to get out more, missed this and the whole Flips thing.Being the biggest faggot in recent memory probably
He came in and immediately spammed everyone with "I know more than you" whileWhat did this guy do to get banned so quickly? Asking only because I think he shoots at Quantico, seem to recall him doing mag dumps.
Thumb hole AT’s make me wonder if I really want to jump into a chassis…. Just too coolThe last two months have been a lot of work moving from Las Vegas to Dallas, but i'm getting settled in and finally got my AT out of it's burrow for the first time since being here. lol
View attachment 8193035
What's that tiny little suppressor ya got there?
Looks like it could be a barrel tuner.What's that tiny little suppressor ya got there?
What's that tiny little suppressor ya got there?
TacopsWhat cases are you guys using to bring your AI to the range/field?
What cases are you guys using to bring your AI to the range/field?
I know Mr. Burt is taking a vaca rn, but what exactly is he referring to here?
M81 woodland. Doooo itI'm getting the entire chassis fitted with some exciting news to go with it
Desperately trying to decide what cerakote work to have done for it. Thinking a tungsten/black theme or a tan/black theme
Some photos from the PRS UK Match last weekend. Probably the last before my AI lands in a Vision Chassis.
Seriously impressed with the Maven for the price! Glass is much clearer, brighter and colour is so much less saturated than my Vortex.
$334AIM FS-42 Folding Stock Bag
Its 27 with the threaded breake. I would consider it max lenght for the bag.$334
AIM: FS-42 Folding Stock Bag, Tan
The FS-42 bag was developed in conjunction with leading rifle manufacturers to offer a unique and secure way of transporting a rifle with a folding stock (Right Folding).www.milehighshooting.com
What length barrel do you have ?
So it had just finished chucking it down for a few hours and was very windy usually a bit warmer in August.Always gotta remind myself that the entire world isnt 80 million degrees outside from may to oct lol. It was tripping me out seeing someone running a jacket in August but nice pics.
As for the cerakote, tungsten and black would be sick. I did bullshark grey and black on my last one turned out better than I expected.
If I had to do my vision swap over I would have used release agent on the action so I could easily pull the action from the chassis in the future.
The gay bois brought out their cute little AI collection today.
View attachment 8203950
View attachment 8203952
Only uncultured swine shoot brakesOnly gay is see is the degenerate who is running a brake when everyone else is shooting civilized
....
I know it sucks. Not going to use my other 30 cals suppressors and going to wait for the Gen 2 SR to be approved. I just don't trust any of my other suppressors to handle the 300NM. I knew it was loud, and had a friend shoot it when I was on the next bench over. Yeah, going to put this barrel away until I get the SR approved.Only gay is see is the degenerate who is running a brake when everyone else is shooting civilized
....