Thanks guys, I’ll look into them!
Question about small rifle primers and large firing pins... I've had my large firing pin bolt bushed by LRI, but they didn't turn down the diameter of the firing pin. They just bushed it to remove the space between the aperture and firing pin. Anyone care to guess whether I can shoot 6BR variants with small rifle primers without piercing them?
Question about small rifle primers and large firing pins... I've had my large firing pin bolt bushed by LRI, but they didn't turn down the diameter of the firing pin. They just bushed it to remove the space between the aperture and firing pin. Anyone care to guess whether I can shoot 6BR variants with small rifle primers without piercing them?
Welcome to the addiction!
And the wifey wants one now... FML..
What is the original color sniper grey or black? It looks grey and I never knew they came in that color.Well, I received my 1993 "camo" AI AW and have spent a good chunk of my day in an acetone bath. Here are some before and after pictures.
I will try to strip the last stubborn layers out but pretty happy with the result so far.
View attachment 7098195
What is the original color sniper grey or black? It looks grey and I never knew they came in that color.
Got the AT LE in last night! AMG mounted on a 3602 Spuhr, pretty damn stoked! Thanks @milehighshooting for the sale!
Had an extra harris laying around, but plan on purchasing an Atlas CAL here in the near future. Also ppan on buying that picatiny block that replaces the spigot slot that ome of the hide members designed. He has a deal setup with anarchy ourdoors or something and aren't available yet i don't think.
I suppose it’s time I join in with my AT.
It has felt like a new rifle since replacing the spigot with the Picatinny rail from @samb300 through Anarchy Outdoors. It has been the absolute best upgrade I’ve made yet beside switching the original 24” 308 barrel with a 26” 260 Bartlein gain twist from MHSA.
View attachment 7098831
View attachment 7098832
I suppose it’s time I join in with my AT.
It has felt like a new rifle since replacing the spigot with the Picatinny rail from @samb300 through Anarchy Outdoors. It has been the absolute best upgrade I’ve made yet beside switching the original 24” 308 barrel with a 26” 260 Bartlein gain twist from MHSA.
View attachment 7098831
View attachment 7098832
Prime 130, until I decide I have enough brass to reload. Which could be awhile because it shoots Prime well enough and I have a metric shit ton from when they had their big sale last year.What load are you using for the .260?
Prime 130, until I decide I have enough brass to reload. Which could be awhile because it shoots Prime well enough and I have a metric shit ton from when they had their big sale last year.
Absolutely. Thank you for such a fine product!Glad you’re liking the spigot mount, thanks for your business!
Sam
If anyone with an AX or AXMC has ever wanted an anti-rotation QD sling mount option for the forend, I designed one that is now available through Anarchy Outdoors.
It’s smaller, thinner, and more snag-free than the factory pic rail/QD mount combo. It is also anti-rotation, with stops at 12, 3, 6 and 9 o’clock. Each stop has approximately 15 degrees of rotation, so there’s still enough room to get comfortable while you’re slung up for positional shooting.
Material is 4140 steel which is Black Nitrided after machining. I wanted to go with steel versus aluminum for the extra strength and durability, even if it is a little heavier. Total weight including the two screws is only 1.3oz.
This will work on both pre-14 and post-14 AX, AXMC, AX338 and AX-AICS forends. All you will need is the correct mounting screws for your forend (you can purchase with or without screws depending on if you need them).
Let me know what you guys think!
Sam
View attachment 7094961
Looks good Sam!
I'm curious though why you abandoned the slightly offset center hole that allowed the tip of the QD swivel to enter the round part of the keyslot and thus kept the whole thing even lower profile? Was it just an insignificant gain compared to the aesthetics?
Thanks
Sweet! I checked like 1 or 2 weeks ago and they still had the coming soon tag haha. Ill have to pick one up thenNice setup, looks great!
I’m the guy that designed the bipod spigots, they are available and ready to ship now from Anarchy. Check them out here —> https://www.anarchyoutdoors.com/accuracy-international-spigot-mount/
Let me know if you have any questions!
Sam
Gonna run a ckye pod with picatinny rail on my AT.
Any idea which pic rail length will run full length on the bottom, or am I going to have to get two rails and back them up to one another?
Gonna run a ckye pod with picatinny rail on my AT.
Any idea which pic rail length will run full length on the bottom, or am I going to have to get two rails and back them up to one another?
I agree.Anyone know which color this is? I’m thinking Dark Earth??
Gar
Dark Earth. DE normally has the black butt pad, Pale Brown and Sage Green normally are color matching.Anyone know which color this is? I’m thinking Dark Earth??
Gar
Oddly enough, I ordered a sage green AX308 that should be here Thursday as well. I'm stoked. I've been wanting an AI for 12 years and I'm finally getting one.
Now I need to find the right back pack to carry it in.
How does that Proof shoot? Does it like factory loads?
Looks good, what length is your PR barrel and where did you get it
Looks good, what length is your PR barrel and where did you get it
Thanks
Thanks. Yeah I did it myself more for function than looks. I could've def done a much better job if I took my time but didn't feel like spending 12hrs stippling a $30 part. The forend is lot less slippery nowReally nice rifle! Did you stipple the stock yourself? -Looks good.
Gar
I am going to remove the paint off my AW, I'm worried about melting or damaging the plastic skins does anyone have recommendations on how to go about this?