Tell me about the GX!
Shoot me a PM if you want to know about the GX. Nothing special but it does what I need to in the CO mountains.
Tell me about the GX!
Hand's down the best looking AI I've laid my eyes on! Nice job Jake!!
View attachment 7310152
Obligatory new scope mounting photo.
View attachment 7310568
Range to zero is tomorrow!
Thanks Richard @CSTactical
Here’s some stills from this weekends rifle league match. Some really good and tricky courses of fire, for the notoriously tall AT rifles. We had a metal tube stage similar to a cattle gate but offset, where I finally did well on. I was never able to score more than a single point, and managed to get 6 hits this time. Finished 9th out of 30 some guys. I’m pretty happy right now. Now someone make fun of my ARCA gamer plate to ruin my mood!View attachment 7310986View attachment 7310987
Yes, to be perfectly clear this is an unauthorized use of the trademarked AI logo and we are very serious about it.
Not a great way to meet new people, but I will be introducing myself to Straight Jacket Armory tomorrow.
-Scott Seigmund
Vice President
Accuracy International of North America, Inc
540-368-3108
Does this mean I'm going to have to cut my arm off?? LMAO
You are correct, Sir. I drank the AI koolaid and I love it.You look familiar, did you put out a few youtube videos reviewing a green AI AT? I think you were doing it in the snow. Was that you?
Does this mean I'm going to have to cut my arm off?? LMAO
If this is sfp, pm me when your ready to sell it lolThe pic with the Schmidt is a 4002 1.5 height. The ZP5 below that is with a 4006, 1.35.
View attachment 7310112View attachment 7310127
@Badfinger here is another few shamless pics.
It is. But you are a solid 3rd on the list. Haven't even shot it yet as I bought it and sent it off to get the skins done. Right at 4 months for those. Sent the barrel off to get chopped. And just got everything back and then an optic put on. So total of zero rounds so far on it.If this is sfp, pm me when your ready to sell it lol
nice what is the caseLockdown boredom and finished the foam in my hard case today!!
I snagged two replacement sheets of 2” high density foam from amazon (prime) for about $40. Price apparently went up but it was a solid choice to replace my garbage foam. It’s all I’ll use now.I need to buy new foam.
nice what is the case
View attachment 7309478
20” 308 AX in Dark Earth (best color lets be honest). Next barrel will be a 6.5CM or 6CM. Can’t decide. You guys sure did cost me some $$. Thank you to the Hide and Mile High Shooting.
that is such an awesome setup.Getting this sat morning started off right....cold bore shot dead on at 600 I'll take it....
View attachment 7308149
View attachment 7308165
Yea, I think the Bang really ties it all together.that is such an awesome setup.
What size Sphur mount are you running here???
It’s the Spuhr SP-6002. 0moa in the mount. 308 zeroed at 100 yards I have 21.5 mils of up remaining out of the 35 total mils spec’d.
1.46", but you can go higher if that's what's comfortable to you.
Is that a 4-20x50 or a 5-27x56? I am trying to find what Sphur mount height will work the best with my AIAX with the top pic rail installed along the handguard for my new 5-2x56
its the 5-27x56
yeah I should Of said that setup is Bangin' lol..Yea, I think the Bang really ties it all together.
but yea, it really is.
In your opinion is there enough room to run Tenebraex covers with the 6002 without hitting the rail?
Good enough pic for me to know that’s M.C.S.A and a P4f reticle.Not the best pic, but here’s mine. 6.5 Creedmoor with Schmidt and Bender PMII
View attachment 7313603
Welcome to the club. I always considered myself a die hard short action guy but now I also have an AXMC in 338 LM to keep the AT companyGot my first AI AT last month. The rifle is amazing, it is going to be my goto rifle whenever I hit the range, just way too much fun to shoot. This is with the 26" 6.5 Creedmoor barrel but also came with a 20" 7.62/308 barrel (haven't shot 308 in a while so this should be fun). Future project will be to have @trophyhunter spin me up a magnum bolt face short action bolt (once I can find a used AI bolt) and @DAVETOOLEY spin me up a 28" 7mm SAUM barrel... why not just buy a long action, maybe an AX MC is in my future but I'm a short action guy and the thought of having a 1.5 mile gun in short action that I can share with Creedmoor and 308 etc. sounds too cool to pass up.
View attachment 7315008
View attachment 7315009
View attachment 7315010
View attachment 7315012
View attachment 7315013
View attachment 7315022
View attachment 7315023
Accessories:
- Anarchy Outdoors Picatinny Spigot - https://www.anarchyoutdoors.com/accuracy-international-spigot-mount/
- Anarchy Outdoors Thumbrest - https://www.anarchyoutdoors.com/accuracy-international-thumb-rest/
- Ckye-Pod from Ckye himself - https://oldballsinc.com/products/copy-of-mdt-ckye-pod-standard-legs
- RRS BAI AT2 dovetail plate - https://www.reallyrightstuff.com/BAI-AT2-Accuracy-International-AT-Chassis
- PVA COMP-40 Tripod - https://patriotvalleyarms.com/comp-40-tripod/
- Ckye Tripod Mocassins - https://oldballsinc.com/collections/old-balls-inc-obi-products/products/moccasins
- Sunwayfoto DYH-90B Leveling Base - https://www.bisontactical.com/shop/sunwayfoto-dyh-90b-leveling-base/
- March 5-42x56 High Master FML-TR1 Reticle - https://www.snipershide.com/shootin...gh-master-fml-tr1-preliminary-review.6993171/
- ARC M10 Low (.94") Rings - https://www.cstactical.com/m10-scope-rings
Love the rifle but why would you ruin such a beautiful scope by putting the mosquito net reticle in it My disdain for Horus reticles aside, you now make me want to get the bolt for the 7 SAUM that much moreI’ll play this game, here’s my short action AX that we converted to 300wsm. Tangent Theta H59 sitting in a Spuhr. Barrel is 16” with ThunderBeast 30p1 at the end all resting in a RRS tripod. This is my nilgai hunting rig.View attachment 7315268
Thank you Nik, that's what I'm afraid of, but hoping the SAUM project in the short action AT will keep me busy enough for a while that I won't be tempted by the MCWelcome to the club. I always considered myself a die hard short action guy but now I also have an AXMC in 338 LM to keep the AT company
I have been searching and that was most of what I seen until I read a post on the hide that the early 15 have a LEP as well. I did find the measurements so maybe the seller has calipers to measure just to be sure.Post 14 are SFP