- Thread starter Hondo64d
- Start date
What magazine(s) work well for you?
So Hawkins a makes a CIP and CIP+ version of there dbm. The CIP is for ai mags, and the CIP+ is for accurate mags. I was able to use accurate mags in the CIP version but I had to trim the mag catch slightly on the accurate magazine to fit the dbm. Just get the right version of the dbm for the mags your going to use and you’ll be fine.
I’m now using the Hawkins hunter dbm and magazine but had to shim the dbm for use with my 300wm since the brass is belted.
- 24” Benchmark MTU - chambered by Straight Jacket Armory
- Triggertech Special
- Manners T4A team elite - swamp
- Area 419 hellfire brake and 14” Arca rail
- atlas cal gen 2
- Vortex Razor gen 2 - 4.5-27x56
- Vortex PMR rings - 1.1”
- 19.5 lbs unloaded
Attachments
Last edited:
So "CIP" is 3.775 and "CIP+" is 3.850 ?
Finally got the little brother upgraded to better glass
nothing special, but finally had the scratch to buy SA action origin, mdt acc chassis, and TT special 2 stage, chassis came today. Hope to get it out tomorrow
Whats everyone's favorite bolt knob? I have a helical diamond and I'm thinking of going to the spiral extended. Anyone use both?
I have the Spiral Extended and dig it, but I'm not super picky about bolt knobs as long as they give me enough real estate.
.
New 300 WSM build
20" Proof Research Sendero CF
Trigger Tech Primary
KRG Bravo
Deadair Muzzle brake
Deadair Sandman S
Bushnell Forge FFP 2.5-15 x50mm
20" Proof Research Sendero CF
Trigger Tech Primary
KRG Bravo
Deadair Muzzle brake
Deadair Sandman S
Bushnell Forge FFP 2.5-15 x50mm
Last edited:
My new fun stick couldn’t be happier
Proof 6.5cm prefit 24” CF sendero
PVA UL jetblast
Krg whiskey 3 gen6
Minox zp5 with a Spuhr
Last edited:
CORRECT, SA. Right at 4lbs for the barreled action, 10.2 with Krg Bravo and optic/mount. 11.4 with Deadair Sandman S
Are there any Black Friday sales on the Origin as of today? Thanks
I have the spiral extended and love it
I have the tactical. I think my next build I'm going to go with the competition.
Tactical knob, but switching to Competition knob.
I just bought an Origin and automatically went with the Tactical knob, but I should have put more thought into it and looked at the Competition knob. The Area 419 also looks good and is similar to the bolt knob on my MPA, but more money right now is tough as I am already way over budget.
When I get the barreled action from Keystone, I may try exchanging the Tactical for the Competition too. Hopefully Northland Shooters Supply will work with me? Or Zermatt direct?
Contact Zermatt direct. They have awesome CS.
Zermatt should work with you. They exchange a rail for me. Just paid shipping.
Loaded some 155gr amax last night and got him zerod and ready for hunting season. I forget how much i really like the origin. When i was running it out to 800 i chambered a round and had to press check because i didn’t feel the origin pick up the round. I’m sure part of that is my now 10 year old aics 5rder with a 2rd extension. But man if it doesn’t create a perfect combo.
Origin (CM material)
Comp. Bolt knob
Proof PCC chambered by Straight Jacket Armory
ZC527
Tenebraex scope caps
TT Diamond
HellFire brake (switched to HF Match)
Flatline Ops HaloX bubble level
Sphur mount 6001?
MDT ACC folding chassis
Atlas CAL
23lbs
Comp. Bolt knob
Proof PCC chambered by Straight Jacket Armory
ZC527
Tenebraex scope caps
TT Diamond
HellFire brake (switched to HF Match)
Flatline Ops HaloX bubble level
Sphur mount 6001?
MDT ACC folding chassis
Atlas CAL
23lbs
Attachments
Last edited:
I hope this is not in the wrong thread, I found an Origin action in stock at Northland Shooters Supply. Has anyone had any dealing with this company and how was the service? thanks in advance
they are on the up and up, great company, bought mine from them mid November, had it within days, just got a barrel from them late last week, came in mail today
Northland Shooters Supply is good to go. I have bought a couple Origin actions from them.
Bighorn origin we threw together as a Christmas gift for my mom. Straight Jacket Armory did the chambering, install, and cerakoting.
- Origin short action chambered in 6 CM
- Bartlein #13 Carbon 1:7.5 twist, finished at 18", threaded 5/8x24
- Triggertech Primary flat blade
- Manners PRS2 "Back in black" with Gen 2 mini-chassis
- Area 419 Arca plate
Waiting on glass at this point - planning to toss a Leupold Mark 5 3-18x on it. Also have a Manners Compact Stock 2 on order (same color). With the adjustable LOP, we felt this would fit her frame a bit better.
- Origin short action chambered in 6 CM
- Bartlein #13 Carbon 1:7.5 twist, finished at 18", threaded 5/8x24
- Triggertech Primary flat blade
- Manners PRS2 "Back in black" with Gen 2 mini-chassis
- Area 419 Arca plate
Waiting on glass at this point - planning to toss a Leupold Mark 5 3-18x on it. Also have a Manners Compact Stock 2 on order (same color). With the adjustable LOP, we felt this would fit her frame a bit better.
You're mom must be pretty awesome
She definitely is! Especially after putting up with my siblings and my shenanigans.
Big Horn Origin 6.5 Creedmoor
- 24” Benchmark MTU - chambered by Straight Jacket Armory
- Triggertech Special
- Manners T4A team elite - swamp
- Area 419 hellfire brake and 14” Arca rail
- Vortex Razor gen 2 - 4.5-27x56
- Vortex PMR rings - 1.1”
- Acurracy 1st scope level
- mischief machine throw lever
- 19.5 lbs unloaded
- 24” Benchmark MTU - chambered by Straight Jacket Armory
- Triggertech Special
- Manners T4A team elite - swamp
- Area 419 hellfire brake and 14” Arca rail
- Vortex Razor gen 2 - 4.5-27x56
- Vortex PMR rings - 1.1”
- Acurracy 1st scope level
- mischief machine throw lever
- 19.5 lbs unloaded
Attachments
Has anyone put an Origin into a Q Side Chick?
Bighorn Origin just received from Front Range
24” Proof Comp Contour in 6mm Creedmoor - bought from a member here with 100 rounds on it.
Area 419 Hellfire
JAE 700b Chassis with Arca rail
Trigger Tech Diamond 2 Stage Flat
Topped with my budget Vortex Viper HS scope I took off my AR (not pictured) - Temp Scope
Put it all together in my basement last night and took it to the range this evening to see how it will shoot. I’m pretty pleased with this kind of performance from factory 108s
Standard 5 shot group with customary flier lol
24” Proof Comp Contour in 6mm Creedmoor - bought from a member here with 100 rounds on it.
Area 419 Hellfire
JAE 700b Chassis with Arca rail
Trigger Tech Diamond 2 Stage Flat
Topped with my budget Vortex Viper HS scope I took off my AR (not pictured) - Temp Scope
Put it all together in my basement last night and took it to the range this evening to see how it will shoot. I’m pretty pleased with this kind of performance from factory 108s
Standard 5 shot group with customary flier lol
Anybody know what the lead time is on a short origin action?
Mike
Mike
Northland Shooters Supply is another dealer to try. They had my left hand Origin in stock which is a tough find.
I ask because I used a half off cert right through Zermatt/Bighorn.
Mike
Mike
Mine just shipped out. It was a 6 month wait for me. It may be a little long now.
I sent the cert in Dec. I'm not in any hurry, I was curious about a general time to expect a notice to pay the rest I owed.
Mike
Mike
Here's mine.
Origin left hand action chambered in .223 Wylde by Keystone Accuracy, with:
Origin left hand action chambered in .223 Wylde by Keystone Accuracy, with:
- 26 inch Rock Creek, cut rifled, 7 twist, Remington Varmint contour barrel
- MPA Hybrid chassis
- TriggerTech Special trigger
- Vortex Strike Eagle 5-25x56 FFP MRAD
- Vortex PMR Rings
Similar threads
