MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
You will love it!These look pretty interesting. I've been looking at the MDT's and this may be the ticket
You will love it!These look pretty interesting. I've been looking at the MDT's and this may be the ticket
Yes, we sure are! They have been delayed, but they should be available soon!
Yes, they are available now! Along with the 308 version, Savage Long Action, TC Compass short action, CZ 455, CZ 457, and Savage Mark II, all are in stock and ready to ship!Any idea on the time frame? Weeks, months?
Yes, they are available now! Along with the 308 version, Savage Long Action, TC Compass short action, CZ 455, CZ 457, and Savage Mark II, all are in stock and ready to ship!
Buy now:
ORYX Precision Rifle Chassis System
oryxchassis.com
Looked just the other day and it wasn't there. You guys are really trying hard to make me spend money.
We will consider it! We are preparing to launch our LSS-RF for the B22 very soon!Please consider a Savage B22!
Thanks!
We are in stock and ready to ship! We generally ship within two business days of the order being placed.Getting ready to buy, do you know what the lead time will be for a Mossberg MVP .223 inlet? When it will ship will depend on where I have it shipped to.
We will consider it! We are preparing to launch our LSS-RF for the B22 very soon!
Make sure you are signed up for the newsletter as well!Will definitely be keeping an eye out for that!
We are in stock and ready to ship! We generally ship within two business days of the order being placed.
You will love it!Done, you guys make it way too easy to spend $414
These became available today; quality control is fire today! Check out the https://mdttac.com/lss-rimfire-chassis-system.html to place your order.Will definitely be keeping an eye out for that!
These became available today; quality control is fire today! Check out the https://mdttac.com/lss-rimfire-chassis-system.html to place your order.
We strive to provide the best possible experience!Now that's just good service.
You will love it!
Forgot to ask, do I need the Oryx mags or does the MVP version use the AR mags?
The Mossberg MVP .223 will use Ar15 magazines We use a standard AR mag latching system, so the factory magazines, as well as the huge amount of aftermarket magazines, should all latch in just fine!
We strive to provide the best possible experience!
It is currently in progress! You can order without fear!just being a fan that is not 6' ~ can you update us on the progress for the ACC LOP reduction?? I don't mind being the ginny pig
As long as you are signed up and have a membership number, you qualify for the discount. Yes, once you have signed up message us through our support portal and provide us with the profile and we can supply you the discount code. Please note, this only applies for MDT products and not Oryx. No, you don't have to shoot a match, and yes, the LSS-RF is eligible.So about the PRS Discount, (sorry, I browsed your post history and couldn't find a post really detailing this and want to be sure)
I have yet to shoot a match or sign up.
Precision Rifle Series| Memberships Page
The Precision Rifle Series is the preeminent rifle organization in the world, structuring a yearly points race for both the PRS Pro Bolt Gun Series and the PRS Regional Series. The PRS Championship Shooting Series is synonymous with precision rifle shooting.www.precisionrifleseries.com
Is the process to sign up for either a Pro or Regional series membership, get a number, and then send my profile to MDT support with what I want?
Do I have to shoot a match first? LSS-RF eligible?
Many Thanks.
Great. Do you have the min- lop?It is currently in progress! You can order without fear!
13.5" is the minimum LOP.Great. Do you have the min- lop?
It's no lightweight woods gun but not bad if I slide the bipod out of the way. The Warne Skyline is a bit chunkyHow does it ride slung?
It's no lightweight woods gun but not bad if I slide the bipod out of the way. The Warne Skyline is a bit chunky
Nah it's not trying to flip over on me. I think either the side or the front would work fine. The barrel rides high enough and the channel has so much room that I don't think there's even a remote chance of barrel contact if you put a flush cup in the sideDoesn't want to flop over upside down then? That is the issue when you put a QD on the bottom. Because there is a lot more aluminum at the end there too preferably put in a flush cup.
Great job, thank you for sharing!
More @Diver160651 stuff to be listed in the px ??Great. Do you have the min- lop?
Any AR-15 grip I believe. The one that comes with it is really nice, you may want to hold off on ordering a grip until you try it.Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?
Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?
Comes with a grip already; however, any AR-15 grip without beavertail will do. I run our vertical grip on mine; it's awesome!Just placed order for an Oryx Chassis for my Savage MK2 .22 LR, should be perfect to replace crappy factory stock. Does anyone know what grips fit this chassis?
Comes with a grip already; however, any AR-15 grip without beavertail will do. I run our vertical grip on mine; it's awesome!
There are no plans at this time, however, you can always run a carbine to fixed stock adapter and a fixed buttstock.What’s the probability of seeing an LSS (either size) for a Howa mini with a fixed interface? Leaning towards an Oryx because I dislike looking at buffer tubes (and stock adaptors) on a bolt action.
There are no plans at this time, however, you can always run a carbine to fixed stock adapter and a fixed buttstock.
Carbine to Fixed Stock Adapter
The Fixed Stock adapter connects to any of our carbine interface chassis enabling the use of a fixed buttstock. Connect our MDT Skeleton Rifle Stock to an MDT chassis that is equipped for a carbine stock. The Carbine to Fixed Stock Adapter installs in seconds and increased the modularity of our...mdttac.com
Fair enough, we do provide the option should someone want it.Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.
I have a Howa Mini in a MDT Brownells BRN-1 with the MDT Skeleton stock. I don't think it's that bad.Unfortunately, the look displeases me. With the folder it’s not as bad, buuut yeah, a bit of a cobbling together of two expensive components. Probably get the LSS and run a carbine stock as is lighter than the Oryx. Not sure why I even care what it looks like though, it’s for the SO.
I have a Howa Mini in a MDT Brownells BRN-1 with the MDT Skeleton stock. I don't think it's that bad.
I have a possible dumb question. I have TC compass in 7mm rem mag. I assume we would run the factory mag correct?
Any chance of seeing a version of the Oryx for the Ruger American AR mag rifles?
That is true. but keep in mind it is built for standard AR-15 parts so if you would like to install an entry-level stock there is a lot of choices!I was aware of the LSS-XL Gen2; it's simply that once I put a stock on that chassis, it's like 50-100% more than the Oryx. I very much liked the idea of a spending $400 and having a usable chassis. Ah well.