-
Having trouble using the site?
Contact support
New B&T Industries Atlas bipod - BLIND pre-order
- Thread starter Kasey
- Start date
Used mine in a prone class today this thing is super stale. helped me stay on target way better than my harris .thanks b&t game changer
The bt72 is YUGE! Kasey and his team did a great job, once again.
Got mine today.... Super is an understatement its huge. Glad I took the gamble on this.
It’s YUUUGE. Looks right at home on a M99. Some comparison pics with Barrett’s 50 bipod (which I don’t like at all)
Last edited:
Does anyone know of a narrow Atlas to ARCA/RRS clamp adapter?
I tried my SCAL with both a RRS BTC Pro clamp and a Sawtooth Rifles adapter and found in both cases the clamp/adapter hit the bipod crosspiece before the bipod achieved full cant.
BTC Pro:
Sawtooth Rifles adapter:
Full cant:
Regular CAL for comparison:
I tried my SCAL with both a RRS BTC Pro clamp and a Sawtooth Rifles adapter and found in both cases the clamp/adapter hit the bipod crosspiece before the bipod achieved full cant.
BTC Pro:
Sawtooth Rifles adapter:
Full cant:
Regular CAL for comparison:
Is that sawtooth adapter This one for the 5H that extends it out for clearance? If not, I'd be curious if it works.
It's not the 5H one, it's this one: http://www.sawtoothrifles.com/store/p6/Sawtooth_Rifles_Bipod_Adapter:_Atlas_.html
Try the rrs btca riser with the sc-lr clamp. Upgrades to a lever clamp. Works with the cal cause that's what I bought. Decided to go with the no dye cal instead of the super cal.
RRS SOAR - Home
soar.reallyrightstuff.com
The other one for the 5H might work then, it extends the clamp out away from the pivot point to allow full cant on the 5H. Plus it doubles getting your bipod out a little further.
BT knocked it out of the park. I spent about 6 hours shooting this bipod on a SR-25 today. It is by far my new favorite. Stable and smooth.
Good job guys.
Good job guys.
Glad the SCAL is filling a gap, I really like the CAL family of bipods.
On mounting ARCA mounts, we can make another mount that elevates the mating surface. As is we are getting 45 degrees of cant on the CAL and SCAL. Not sure what it is with the mounts shown in the pics above.
ALL of our 5-H feet fit the SCAL.
We will be at SHOT, booth 20135 in LE ballroom, so if you go and you have time stop by. It’ll look just like this but more lights, lots of booths with exhibitors and a bunch of people!
On mounting ARCA mounts, we can make another mount that elevates the mating surface. As is we are getting 45 degrees of cant on the CAL and SCAL. Not sure what it is with the mounts shown in the pics above.
ALL of our 5-H feet fit the SCAL.
We will be at SHOT, booth 20135 in LE ballroom, so if you go and you have time stop by. It’ll look just like this but more lights, lots of booths with exhibitors and a bunch of people!
Attachments
Does anyone know if this https://soar.reallyrightstuff.com/btca will work with the SCAL or Gen 2 CAL and https://soar.reallyrightstuff.com/BTC-Pro-Clamp-for-Atlas-Bipod to get full pan out of the bipod? I would rather not use a spigot like what Area 419 makes if possible. I don't really want it pushed out any farther past the rail.
I've got the btca adapter plate (no clamp) on order to try out. I can give you an update once it arrives.
Thanks. I tried calling RRS but they are at SHOT this week. The spigot just pushed the bipod so far out on my AR-10 that I can't reach it when shooting prone.
Btca and SC-LR clamp work great with the cal2. Mine is the no dye.
If you are going to go with the Btca you might as well go with the sclr. Sclr doesn't work with the atlas unless you have the Btca (unavoidable design constraints per @MPHReallyRightStuff)
All pictures taken at full can't.
Also no the Btca and the pro will not work together. The Btca has 2 screws to go into the atlas. You then screw the plate into that with 1 screw with the raised area providing rotational stability.
The pro has 2 screws in it which are the same location as the Btca. Also the pro has no cut out for the raised area.
I already have the BTC-Pro and just wanted to find something other than a spigot mount for it.
20 years of support.
V8
PRS
CAL
SCAL
Deam, that SCAL is awesome
.
Thank you Kasey for making these amazing bipods, and ❤ Atlas crew in the factory and sales & advertising side.
V8
PRS
CAL
SCAL
Deam, that SCAL is awesome
.Thank you Kasey for making these amazing bipods, and ❤ Atlas crew in the factory and sales & advertising side.
That’s a good pic.20 years of support.
V8
PRS
CAL
SCAL
Deam, that SCAL is awesome
Thank you Kasey for making these amazing bipods, and ❤ Atlas crew in the factory and sales & advertising side.
View attachment 7232896
20 years of support.
V8
PRS
CAL
SCAL
Deam, that SCAL is awesome
Thank you Kasey for making these amazing bipods, and ❤ Atlas crew in the factory and sales & advertising side.
View attachment 7232896
What feet are on your CAL?
Those are Boscabel bel-lok titatium spiked feets.
Made in Australia.
Boscabel | Necessity Redefined
www.boscabel.com
Those are Boscabel bel-lok titatium spiked feets.
Made in Australia.
Boscabel | Necessity Redefined
How do you like the ball joint vs fixed angle like the other feet?
I have had no problems with these feets.
Had thoughts before i used, but these are worked great.
Titanium spike feets are my favourite.
Nice, you got the Atlas spikes on the SCAL.
I should buy those too, in winter time those spikes are the one and only right feet on bipod.
It's a krg whiskey 3 that he painted. @viking78 shows lots of pretty pictures of his Tikkas in the tikka thread.
Really Right Stuff, here is the product link to the W3 plate.
RRS SOAR - Home
soar.reallyrightstuff.com
Anyone mount one of these on a mdt acc? Wanted to get an idea on the scal to cyke footprint and size comparison.
Similar threads
