- Thread starter redneckbmxer24
- Start date
Mdt Lss, with Remington 700 sps varmint action.
Magpul stock and grip
Vortex scope.
Magpul stock and grip
Vortex scope.
Remington 5R Mil-Spec
McMillan M40A1 stock
Leupold Mk4 4.5-14x50 LR/T with M1 knobs
Harris bipod
Cobra rings
PRI base
Finally got it together:
DT srs covert A1
26" .300 win mag DT barrel
TBAC 30BA suppressor
Atlas bipod v8
Steiner 5-25 MSR reticle
Tab biathlon sling
Adm recon X QD mount
Sent from my iPad using Tapatalk
DT srs covert A1
26" .300 win mag DT barrel
TBAC 30BA suppressor
Atlas bipod v8
Steiner 5-25 MSR reticle
Tab biathlon sling
Adm recon X QD mount
Sent from my iPad using Tapatalk
The brake is a AAC 18T for my POS AAC can. I ordered mine with the thumbhole kit and the NV bridge but those parts haven't made it to the dealers yet.
What is wrong with your AAC can? Just wondering as I have ordered an AAC SD 762...
The problem with the 762 SD is the QD, they can't make a QD to save their lives. The latches don't hold be it 18t, 51t, 90t, and the threads are too coarse for it to hold against the shoulder without backing off. Their quality control also sucks, I have a ranger 2 thread on that I have to send back because the threads are not concentric in the can. It wobbles going on every rifle it's been on and there's one shiny spot on the rear where it has mated up to all of them with only about 100 degrees of contact. You can actually look between the rear of the can and shoulder of the barrel and see light through one side. This causes horrible accuracy and POI shifts (12").
Do yourself a favor and cancel that order. Buy a quality can like a thunderbeast or a SAS.
Thanks! =)
Specs:
*T3 SS Varmint in .308
*AICS 2.0 for Rem 700 (modified to work with the T3 action)
*Nightforce 5,5-22x50 MIL/MIL MLR
*Spuhr mount
*Ase Utra Jet-Z Compact suppressor
*Altas bipod
*AI-style bolt handle from member "cannoncrossfire" here on the Hide
Ramington 700, 308 Win, 1:12 26" barrel, HS Precision Stock, TPS Rings and 20 MOA base, SWFA 12x42 Scope, custom Bolt handle, Kydex cheek rest, Wyatt's Detachable magazine system and Harris Bipod.
Last edited:
hope these pictures load
Last edited:
Remington 5R Mil-Spec
McMillan M40A1 stock
Leupold Mk4 4.5-14x50 LR/T with M1 knobs
Harris bipod
Cobra rings
PRI base
Classic, simply deadly, no shiny crap needed. The perfect rifle.
bat scarbrough hv 6ppc. freakin laser!!!!!
bat scarbrough hv 6ppc. freakin laser!!!!!
That's probably the first benchrest rifle I've seen in this topic. A bit of variation is always good
100 or 200 meter benchrest, I assume?
Sent from my GT-S6810P using Tapatalk
Looks good man.Finally got it together:
DT srs covert A1
26" .300 win mag DT barrel
TBAC 30BA suppressor
Atlas bipod v8
Steiner 5-25 MSR reticle
Tab biathlon sling
Adm recon X QD mount
Sent from my iPad using Tapatalk
What is your overall length from suppressor to butt?
precision rifles... show em
Sig SSG 3000 patrol, Leupold Mark 4 ER-T 6.5-20x50mm M5 FFP TMR, Sphur ISMS 20.6/6mil mount. ACI, expecting my McMillan stock in august!!
Sent from my iPhone using Tapatalk
Sig SSG 3000 patrol, Leupold Mark 4 ER-T 6.5-20x50mm M5 FFP TMR, Sphur ISMS 20.6/6mil mount. ACI, expecting my McMillan stock in august!!
Sent from my iPhone using Tapatalk
Last edited:
pic
how 1500 .308 20" barrel
rifle basix trigger only because I like mine set to 16 oz.
egw 20 minute base...I added another 10 minutes with some jb weld
badger brake
bell and Carlson medalist stock bedded. I took a hoof rasp to the wings and smoothed off the sides
tactical works stock pack, I like it as it's softer than kydex and I can stay on target longer
schmitd bender 5 x 25 p4f
cdi bottom metal and mags
with 175 bergers this system will routinely keep 5 rds in 1 1/2" at 300 yards with some help from the wind
Did you try it in the Quick Reply, or the Full Reply? The Full Reply has an Image Button to use for photos. See, easy as pie.
Nice camo by the way. Did you do it yourself? sorry posted it in wrong place
how 1500 .308 20" barrel
rifle basix trigger only because I like mine set to 16 oz.
egw 20 minute base...I added another 10 minutes with some jb weld
badger brake
bell and Carlson medalist stock bedded. I took a hoof rasp to the wings and smoothed off the sides
tactical works stock pack, I like it as it's softer than kydex and I can stay on target longer
schmitd bender 5 x 25 p4f
cdi bottom metal and mags
with 175 bergers this system will routinely keep 5 rds in 1 1/2" at 300 yards with some help from the wind
Attachments
Last edited:
Thanks! First five shot group I did with it was 0.884 inches outside to outside... then would you subtract the diameter of the bullet (.308), leaving a final group spread/size of just over 1/2 MOA (0.576 inches)?
Yeah - love the lack of bling, nice rifle...
Thanks!
I haven't ever really measured my groups before with the intention of recording the data, until now, so I wanted to make sure I was doing it right. I've heard people say to do it every which way.
haven't handled the US stock, but I'm sure that you'll love the McM!!
post pics when you get it.
accuracy is impressive out of the box
This is a collection of strong Pornography. It makes me want my rifle to be done even more. Glass is bought, ammo is sitting in a can waiting, rifle is 2/3 paid for. Hopefully less then a month, she'll be built, and I can be posting my first precision rifle up here.
I have none, only ideas for rifle builds, and I'm already addicted
Sent from my GT-S6810P using Tapatalk
Here's my first humble build:
Remington 700 AAC-SD in .308
McRee's Precision G5 Tmag Stock
Weaver 20 MOA base (excess length cut down)
TPS 30mm Ultra-Low rings
SWFA SS10x42 side focus scope
Vortex scope mounted cant level
Harris 3-9 notched swivel bipod with throw leaver
McRee's Precision Stock Pack (made by Tactical Tailor)
Not pictured: Turner All Weather National Match Sling with flush cup harware.
Still to come:
Bolt know upgrade by Short Action Customs.
Considering a trigger upgrade, but I'm not sold yet.
A QD suppressor of some flavor - Phantom, Saker, etc...
This was my first three shots at 100 last weekend (I know it's a minute low and have since adjusted my zero). The groups open up as the barrel heats up, but I was pretty proud of this one.
Remington 700 AAC-SD in .308
McRee's Precision G5 Tmag Stock
Weaver 20 MOA base (excess length cut down)
TPS 30mm Ultra-Low rings
SWFA SS10x42 side focus scope
Vortex scope mounted cant level
Harris 3-9 notched swivel bipod with throw leaver
McRee's Precision Stock Pack (made by Tactical Tailor)
Not pictured: Turner All Weather National Match Sling with flush cup harware.
Still to come:
Bolt know upgrade by Short Action Customs.
Considering a trigger upgrade, but I'm not sold yet.
A QD suppressor of some flavor - Phantom, Saker, etc...
This was my first three shots at 100 last weekend (I know it's a minute low and have since adjusted my zero). The groups open up as the barrel heats up, but I was pretty proud of this one.
Last edited:
Heres my pride and joy.
Already posted in another thread..
Already posted in another thread..
Showoff!
Sent from my HTC6500LVW using Tapatalk
Variety is the spice of life. Nice collection!
Meet the GHOST;
Stiller P1000
Kelbly stock custom paint
Jewell trigger
20moa rail stillers
shown in 6br, have a matched 6.5x47,223, 6.5x284 barrels for it and a matched bolt for the 223.
Scope is a NF br ch3 not mounted when picture take,
Stiller P1000
Kelbly stock custom paint
Jewell trigger
20moa rail stillers
shown in 6br, have a matched 6.5x47,223, 6.5x284 barrels for it and a matched bolt for the 223.
Scope is a NF br ch3 not mounted when picture take,
700VS modified by Hateca
Dig your rifle, ducks are cool too....
So when you reach in the safe to get one how the hell do you tell them apart? Might as well all be the same.
Yeah I'll bet it's just terrible. Sounds like a real first world dilemma!
Thinned down a lot, only thing really missing is a 223 Kmw gap build currently being finished up. A couple of em have multiple barrels and I have 2 uppers for the gap10. If I'm doin my part they are all pretty precise
Thinned down a lot, only thing really missing is a 223 Kmw gap build currently being finished up. A couple of em have multiple barrels and I have 2 uppers for the gap10. If I'm doin my part they are all pretty precise
Beautiful collection Joe!!!
Similar threads
