Should I feel bad for liking the 556 more than the SSG3000?
Sent from my GT-S6810P using Tapatalk
- Thread starter redneckbmxer24
- Start date
Should I feel bad for liking the 556 more than the SSG3000?
Sent from my GT-S6810P using Tapatalk
Remington 700 aac-sd. Vortex viper HS. Bell and Carlson stock. Next is a new bipod for the bell and Carlson and of course, a suppressor to finish it off.
My New MRAD and SB PMII 3-27x56 home in a Spuhr Mount
Just put this one together... Remington 700 AAC-SD .308, AX chassis, Zeiss HD5 w/ Rapid-z1000 reticle (matches .308 175smk ballistics from 100 to 1000 yards)
This is nothing exotic but I started my 700 5R .308 project 4-5 years ago with a fixed power SWFA scope. I've since added a Kahntrol clamp on muzzle brake, a KRG bolt lift, a few other pieces and a lot of ammo ... together we now do a pretty good job out to 900-1000 yards. I just got it back this week from LongRifles Inc where they did a fantastic job fitting this Surgeon bottom metal. Someday I'll post something here more trick but for now this is a pretty solid shooter! 
Here's a few of my custom bolt guns that I travel with when I'm working out in the field
All were built by Omar Alonzo except nighthawk 308
Top to bottom
300 Norma AI Deviant Action
6.5 Saum Bat tactical action 26"Krieger 5R 1-8.5T
6-284 Pierce Nighthawk Action 26" Broughton 1-8
308 Pierce Nighthawk 18" Broughton 1-10
7 Saum AI Surgeon WSM 22" Krieger 1-9
All were built by Omar Alonzo except nighthawk 308
Top to bottom
300 Norma AI Deviant Action
6.5 Saum Bat tactical action 26"Krieger 5R 1-8.5T
6-284 Pierce Nighthawk Action 26" Broughton 1-8
308 Pierce Nighthawk 18" Broughton 1-10
7 Saum AI Surgeon WSM 22" Krieger 1-9
Remington 700 .308 26" 1:12 tube, HS Precision stock, TPS steal one piece base and rings, SWFA 12x scope, Wyatt Detacable magazine system, 5 & 10 round mags, custom bolt knob. Shoots great, love it. 
6.5 Nemesis
22" 1:8 medium heavy barrel
blueprinted rem 700 action
Jewel trigger set at 13oz
Third eye tactical evo chassis
Third eye tactical 20moa rail
Third eye tactical 20moa unimount
Sightron s3 6-24x50
Atlas bt10 bipiod
UK Gunworks bolt knob
140gr berger hybrids at 2780fps or 123gr amax at 2889fps.
soon being changed to 6.5 WSM with a 30" tube.
gary
22" 1:8 medium heavy barrel
blueprinted rem 700 action
Jewel trigger set at 13oz
Third eye tactical evo chassis
Third eye tactical 20moa rail
Third eye tactical 20moa unimount
Sightron s3 6-24x50
Atlas bt10 bipiod
UK Gunworks bolt knob
140gr berger hybrids at 2780fps or 123gr amax at 2889fps.
soon being changed to 6.5 WSM with a 30" tube.
gary
My 6.5 Creedmoor from LongRifles Inc just showed up. They did a killer job building this rifle. Fit and finish are amazing. If this rifle shoots half as good as it looks, then I'm going to be a very happy customer.
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
My 6.5 Creedmoor from LongRifles Inc just showed up. They did a killer job building this rifle. Fit and finish are amazing. If this rifle shoots half as good as it looks, then I'm going to be a very happy customer.
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
Great looking rig! It will really be nice when you put the vortex on.
Damn that is awesome!!!!My 6.5 Creedmoor from LongRifles Inc just showed up. They did a killer job building this rifle. Fit and finish are amazing. If this rifle shoots half as good as it looks, then I'm going to be a very happy customer.
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
Wow that is a bad ass bad ass!!~
My 6.5 Creedmoor from LongRifles Inc just showed up. They did a killer job building this rifle. Fit and finish are amazing. If this rifle shoots half as good as it looks, then I'm going to be a very happy customer.
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
My 6.5 Creedmoor from LongRifles Inc just showed up. They did a killer job building this rifle. Fit and finish are amazing. If this rifle shoots half as good as it looks, then I'm going to be a very happy customer.
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
I don't think any LRI builds have ever failed to be awesome. Great looking rifle!
Sent from my GT-S6810P using Tapatalk
My contribution to this thread...
Did Accurate Ordnance build this?
Stock 700 action, trued by Krieger and chambered in .260 Rem. 28" Krieger stainless fluted barrel. HS-precision stock. Jewel Trigger. Leupold Mark 4 8.5-25x50mm LR/T.
Here we are shooting ground squirrels at 500 yards.
Here we are shooting ground squirrels at 500 yards.
That is a beautiful picture. Would love to be in a place like that!Stock 700 action, trued by Krieger and chambered in .260 Rem. 28" Krieger stainless fluted barrel. HS-precision stock. Jewel Trigger. Leupold Mark 4 8.5-25x50mm LR/T.
Here we are shooting ground squirrels at 500 yards.
Specs: HS Precision PST007 Stock
Bartlein 24' 1:10. 308
AICS Bottom metal
Tapco Muzzlebrake
20 MOA Base
30MM Rings
Unfortunately I put this thing together over YEARS.. some of the specs I may be off on.
Pardon the mess on the bench.
Waiting on new glass
Leupold Mark IV M5 8.5-25 X 50 FFP TMR
Last edited:
My 6.5 Creedmoor from LongRifles Inc just showed up. They did a killer job building this rifle. Fit and finish are amazing. If this rifle shoots half as good as it looks, then I'm going to be a very happy customer.
Now if only my Vortex Razor II 4.5-27 would hurry up and get here.
25" Bartlein 1:8" twist Heavy Palma Contour w/ LRI brake
Stiller TAC30A/W
Badger M5 DBM
McMillan A5 w/ thumbwheel cheekpeice
LRI Holographic Camo paintjob
Cerakoted all metal using a burnt bronze and coyote tan mix
Very nice rifle. Where did you get that engineering drawing? I would love to have one for a couple of calibers to put on the wall.
I made that drawing in AutoCad. I had a bare spot on my wall by my reloading bench that needed to be filled. So I made my own poster.
I created a border, redrew the SAAMI specs, then 3D modeled the 6.5CM cartridge and used that as the side images. I printed out 17"x24" on one of the plotters at work.
Sent from my iPhone using Tapatalk
I made that drawing in AutoCad. I had a bare spot on my wall by my reloading bench that needed to be filled. So I made my own poster.
I created a border, redrew the SAAMI specs, then 3D modeled the 6.5CM cartridge and used that as the side images. I printed out 17"x24" on one of the plotters at work.
Sent from my iPhone using Tapatalk
Sent you a PM.
6.5 Nemesis
22" 1:8 medium heavy barrel
blueprinted rem 700 action
Jewel trigger set at 13oz
Third eye tactical evo chassis
Third eye tactical 20moa rail
Third eye tactical 20moa unimount
Sightron s3 6-24x50
Atlas bt10 bipiod
UK Gunworks bolt knob
140gr berger hybrids at 2780fps or 123gr amax at 2889fps.
soon being changed to 6.5 WSM with a 30" tube.
gary
Never seen that chassis before, what did it cost? Their site doesn't have a price
Sent from my iPhone using Tapatalk
So I wasn't the only one thinking that was a awesome drawing under that beautiful rifle. That is a great idea AK-Bandit.
My first Remington and first bolt action.
A couple changes.
This looks like a magazine cover!! Great picture and sweet rifle!!
Remington 700 .308
Manners T5A 100% Carbon Fiber
Nightforce 5.5-22-56
Timney #510
Remington / Manners
http://i41.photobucket.com/albums/e270/benji1975/unnamed1.jpg
http://i41.photobucket.com/albums/e270/benji1975/unnamed.jpg
Remington 700 .308
Manners T5A 100% Carbon Fiber
Nightforce 5.5-22-56
Timney #510
http://i41.photobucket.com/albums/e270/benji1975/unnamed1.jpg
http://i41.photobucket.com/albums/e270/benji1975/unnamed.jpg
Remington 700 .308
Manners T5A 100% Carbon Fiber
Nightforce 5.5-22-56
Timney #510
Love these stocks. My first rifle I had the B&C TM and my wife took that rifle for her's. Then I went with an AICS and honestly, I like the B&C better. Now I'm torn between going back to the B&C or McMillan.
Dam these just keep getting better. Tag for my spot taking some new pics tomorrow
Last edited:
My new Snowy Mountain Rifle Co. Paladin .308
Specs:
SMR 3600 action
Fluted bolt w/ M-16 style extractor
SMR DBM (takes AI mags)
20" Benchmark 5R barrel, .308, threaded
Timney 510 trigger
OD green CeraKote
Accessories:
B&C Medalist Tactical stock, hook style
Vortex Razor HD 5-20x50mm (EBR-2B)
SMR 20 MOA base
Seekins 35mm rings
Harris bipod, Eagle stock pack
Specs:
SMR 3600 action
Fluted bolt w/ M-16 style extractor
SMR DBM (takes AI mags)
20" Benchmark 5R barrel, .308, threaded
Timney 510 trigger
OD green CeraKote
Accessories:
B&C Medalist Tactical stock, hook style
Vortex Razor HD 5-20x50mm (EBR-2B)
SMR 20 MOA base
Seekins 35mm rings
Harris bipod, Eagle stock pack
My new Snowy Mountain Rifle Co. Paladin .308.
Specs:
SMR 3600 action
Fluted bolt w/ M-16 style extractor
SMR DBM (takes AI mags)
20" Benchmark 5R barrel, .308, threaded
Timney 510 trigger
OD green CeraKote
Accessories:
B&C Medalist Tactical stock, hook style
Vortex Razor HD 5-20x50mm (EBR-2B)
SMR 20 MOA base
Seekins 35mm rings
Harris bipod, Eagle stock pack
Specs:
SMR 3600 action
Fluted bolt w/ M-16 style extractor
SMR DBM (takes AI mags)
20" Benchmark 5R barrel, .308, threaded
Timney 510 trigger
OD green CeraKote
Accessories:
B&C Medalist Tactical stock, hook style
Vortex Razor HD 5-20x50mm (EBR-2B)
SMR 20 MOA base
Seekins 35mm rings
Harris bipod, Eagle stock pack
Stock 700 action, trued by Krieger and chambered in .260 Rem. 28" Krieger stainless fluted barrel. HS-precision stock. Jewel Trigger. Leupold Mark 4 8.5-25x50mm LR/T.
Here we are shooting ground squirrels at 500 yards.
Oh My gosh... that place looks sweet.
Nice rigs too... very very jealous!!
I didnt get it direct from them UK Gunworks had it in stock already but i believe the base model is £680 in the UK, with all the extras (folding stock ect..) think it works out to £850 ish
gary
[MENTION=57417]Tshakabika[/MENTION] Is that a tacops surgeon/AI combo?? Badass man!
Gap 308
Gap built 308 ,paint by me hammers everything I've put in it
Gap built 308 ,paint by me hammers everything I've put in it
Wouldn't a three-pronged flash hider increase vibrations? Awesome rifle either way!
Sent from my GT-S6810P using Tapatalk
It's an AAC adapter .
Do you mean increase the vibration of the barrel after the bullet exits .
Either way it's easily a .3 rifle and the adapter protects the muzzle so I'm keeping it.
Yeah, I recognized it.
That, but maybe also before it does. Probably not a noticeable difference, but I'm just curious
A thread protector would protect the threads as well, and so would a brake. Might be interesting to see the differences.
Sent from my GT-S6810P using Tapatalk
Looks to me like a Surgeon 591 in a KMW Sentinel with Spuhr mount for the optic (I don't recognize that, though), and an Atlas bipod.
Sent from my GT-S6810P using Tapatalk
Similar threads
