So if I had a bunch of absolutely smokingly priced 1/2" AR500 targets......

260284

Sergeant
PX Member
Minuteman
  • Feb 15, 2017
    1,754
    881
    53
    Kansas
    I am in for the following:

    1- 4"
    1- 6"
    1- 8"
    2- 25%
     
    Last edited:

    Matagorda308

    Curmudgeon Charcutier
    Minuteman
    Dec 1, 2019
    49
    35
    Matagorda, Texas
    63% IPSC is max size. 12x24 can be done, that fills the box.
    Quick calculation looks like two 63% ipsc or maybe two 10x24 pieces would still be under the flat rate 70# limit.
    12x24 might go over the weight limit shipping two?
    Would you be interested in doing some 10x24 sizes?
    Or 12x24 if two make it under the limit?
    Prices for 10x24 and 12x24 assuming you are willing?
    My apologies for complicating a Hot Deal. I am representing a small group asking questions and shopping. If you wish to stick with the initial post sizing we understand.
     

    Tyler Kemp

    Print Daddy
    Commercial Supporter
    PX Member
    Minuteman
    Aug 23, 2008
    1,499
    960
    MO
    mkmachining.com
    Two 12x24 will almost certainly be too heavy. (4) 12" plates are just over 60lbs from 3/8".

    For this, lets stay with existing sizes. But if you let me know how many targets youre after we can discuss a small custom batch.
     

    Stoweit

    Supporter
    Supporter
    PX Member
    PX Member
    Minuteman
  • Jun 19, 2017
    676
    332
    New England
    Will we get a message that tells us if we will get what we said we would buy. Not being a dick, just asking. Please take my money.
     

    goneballistic

    Village Idiot
    PX Member
    Minuteman
    Jul 17, 2007
    311
    109
    Utah
    I've got the opportunity to make a one-time priced run of 1/2" AR500 targets from a substantial amount of scrap off a substantially sized job.

    Got contacted by my hookup about excess material at a great discount that can be done into prices as large as a full IPSC.

    It's looking like I've got around 300 square feet to work with.

    Wanting to do hybrid squares (hang as a square or diamond), IPSC, and if there's something else more than a few folks want, this can be done as well.

    Hypothetical 'hide prices below to gauge interest:

    4"-$7
    6"-$15
    8"-$20
    10"-$30
    12"$45
    25% IPSC-$15
    50% IPSC-$45
    63% IPSC-$70
    100% IPSC-$175

    I'll be frank in that I'm not doing this to make 0 money, cause handling heavy targets is not a lot of fun, neither is the packing and shipping. However, these prices compare quite favorably to the market and I figured it would be worth an ask!
    I'm in for two 25% and a 50% IPSC
     

    glenrmoore

    Private
    Minuteman
    Jan 14, 2021
    1
    0
    Cuero Tx.
    I've got the opportunity to make a one-time priced run of 1/2" AR500 targets from a substantial amount of scrap off a substantially sized job.

    Got contacted by my hookup about excess material at a great discount that can be done into prices as large as a full IPSC.

    It's looking like I've got around 300 square feet to work with.

    Wanting to do hybrid squares (hang as a square or diamond), IPSC, and if there's something else more than a few folks want, this can be done as well.

    Hypothetical 'hide prices below to gauge interest:

    4"-$7
    6"-$15
    8"-$20
    10"-$30
    12"$45
    25% IPSC-$15
    50% IPSC-$45
    63% IPSC-$70
    100% IPSC-$175

    I'll be frank in that I'm not doing this to make 0 money, cause handling heavy targets is not a lot of fun, neither is the packing and shipping. However, these prices compare quite favorably to the market and I figured it would be worth an ask!
    I would be interested in 5 of the 50%IPSC targets>
     

    spife7980

    Luchador
    PX Member
    Minuteman
    Feb 10, 2017
    9,511
    8,196
    Central TX
    I don't have time to send a message to everyone sadly. But I will post a link here when things are live. At that point, please give me your money. In return you can know you have just a bit of my spine in every package :)
    @Tyler Kemp are we actually ordering off messages on this page or are you going to post a link where we order?
    And just 5 posts above yours!
     

    Tyler Kemp

    Print Daddy
    Commercial Supporter
    PX Member
    Minuteman
    Aug 23, 2008
    1,499
    960
    MO
    mkmachining.com
    BEHOLD:


    Order away. They will be cut this week, shipping is NOT going to be exceptionally speedy. I'm anticipating a lot of orders and there's only so much steel packing time. Please don't ask if it's showing up next week. I'd say plan on 4-6 weeks, a good chunk of that being USPS delays.
     
    • Like
    Reactions: M8541Reaper

    Tyler Kemp

    Print Daddy
    Commercial Supporter
    PX Member
    Minuteman
    Aug 23, 2008
    1,499
    960
    MO
    mkmachining.com
    Sort by A-Z and the 1/2" (8 products) should be up top. Price matches what I'm seeing?

    WAIT I see a few discrepancies will fix now.

    Double edit, it was just the 50% IPSC that accidentally had a 63% IPSC price.
     

    KnowNothing256

    Supporter
    Supporter
    PX Member
    Minuteman
    Jan 9, 2020
    342
    168
    Pricing looks different to me too, here's what I'm seeing:

    4" Square: $14.99 link price vs $7 thread price
    6" Square: $19.99 link price vs $15 thread price
    8" Square: $39.99 link price vs $20 thread price
    10" Square: $49.99 link price vs $30 thread price
    12" Square: $59.99 link price vs $45 thread price
    25% IPSC: $19.99 link price vs $15 thread price
    50% IPSC:$69.99 link price vs $45 thread price
    63% IPSC: $109.99 link price vs $70 thread price
    100% IPSC: Not listed at the link vs $175 thread price

    Am I looking in the wrong spot?
     

    ma smith

    Gunny Sergeant
    PX Member
    Minuteman
    Sep 29, 2020
    553
    281
    Prices are way off (w/out a code):unsure:
    EG +∆57% for the 63% IPSC
    [$109.99 link price vs $70 thread price]

    edit: see post #138
     
    Last edited:

    260284

    Sergeant
    PX Member
    Minuteman
  • Feb 15, 2017
    1,754
    881
    53
    Kansas

    Try this. I just placed my order and everything was correct for me.
     

    bmash

    Sergeant of the Hide
    PX Member
    Minuteman
    May 21, 2018
    167
    101
    Zachary, LA

    Try this. I just placed my order and everything was correct for me.
    Nope. It takes me to 3/8”. i Don’t get it...
    I think the issue is that we're looking at the 3/8" plates, just searched for "1/2" ar500" and it took me to the goods. Here's a link:

    that works - thanks!
     

    Tyler Kemp

    Print Daddy
    Commercial Supporter
    PX Member
    Minuteman
    Aug 23, 2008
    1,499
    960
    MO
    mkmachining.com
    Sort alphabetically and it'll have 1/2" up top.

    On my browser this is the standard method of sorting...not sure why it is the same for some, and different for others.

    Sorry, wish I could make that easier to navigate.