Stock Mods (B&C M40) with pics

GN2

Private
Minuteman
Nov 16, 2018
8
8
6
Alright guys, well ive had a R700 long range sitting in my safe for awhile collecting dust. I decided to go ahead and make it into a project gun, as i was thinking of setting the barreled action into a new stock anyways. So basically i took the factory B&C stock, cut it up, textured it, and repainted the whole deal. Let me know what you guys think.

Before all hell broke loose:
2D4DD97B-A0F8-4D6B-9DF7-E44658FA362D.jpeg

I pretty much cut the large chunks out of the grip/comb with a hacksaw, and finished it up with a dremel.
472C0DB3-3C7B-40BE-8B34-3BFDA3EE28A8.jpeg36458630-DC11-40A4-B7F3-C6C58E24B09C.jpeg

Then came time for the epoxy
1377AB24-13D0-4CDA-80AC-2BE895BDA043.jpegC2E45534-E818-4299-9E88-A8665CC18690.jpeg

After sanding down the peaks/sharp areas.
0F390F29-0D15-46B8-928F-83F20DEB714B.jpeg2B16AB6D-F641-4CE7-B00F-70D1DECB310C.jpeg

QD flush cups
BCABD184-DD3A-4B02-BF45-8046D59A75A3.jpegE05A01AF-1079-4DFF-A225-603611EA5A48.jpeg
 
  • Like
Reactions: Genin and PBWalsh

AMGtuned

Just white trash with money.....
Belligerents
Minuteman
May 6, 2018
796
674
99
Maine
Nicely done. I have a couple B&C stocks that I do not mind cutting/grinding/practicing on. They are cheap, and continue to work. I'm convinced that a stock does not mean everything when it comes to impacts, so hack away and make it what you like! Thanks for the share
 
  • Like
Reactions: GN2

Campguy308

Gunny Sergeant
Belligerents
Minuteman
Jun 26, 2018
678
411
69
NE Texas
I'd like to repaint mine. What's the best way to remove all the factory epoxy paint?
 

Theslipperyseal

Private
Minuteman
Jan 3, 2019
14
7
6
Holy cow man that's awesome!! What did you use for texture? I'm looking seriously at the m40s stock for my Savage and it sounds like the cheek Weld may be insufficient based on you wanting a riser? Do you like it otherwise?
 

GN2

Private
Minuteman
Nov 16, 2018
8
8
6
Holy cow man that's awesome!! What did you use for texture? I'm looking seriously at the m40s stock for my Savage and it sounds like the cheek Weld may be insufficient based on you wanting a riser? Do you like it otherwise?
I used JB Weld for the texture and yes, it needs some sort of riser. I do have a stock pack that i had previously used and just built up the comb with some sleeping pad material and 100mph tape. But a kydex riser would be more permanent/durable which i am adding next. Overall it is a decent stock, especially after bedding it. It came with the gun originally, but it i were looking to buy a stock, i would be looking for something with more options/adjustments without having to modify it.
 

crunchy

Sergeant of the Hide
Belligerents
Minuteman
Jan 1, 2019
139
47
34
Love the texture. took some time to do all that I am sure.
 

Dombern34

Sergeant of the Hide
Belligerents
Minuteman
Jun 28, 2019
417
187
49
may I ask what technique you used to get the texture? sponge or something similar? awesome job sir.
 

DRAGON64

Sergeant
Belligerents
Feb 22, 2011
392
45
34
Alabama
What is the bottom magazine system used for your build? I considered the direct DBL?DBM replacements from Wyatte or PT&G, but did not want 10" of magazine hanging out from under my stock (30-06 10-rounder). Mine is a 700 Long Range as well.
 

Bcamos

Private
Belligerents
Minuteman
Aug 30, 2012
137
144
49
30
Texas
That turned out pretty good. This gives me some ideas for a rimfire stock that I've been wanting to chop up for a long time.
 

GN2

Private
Minuteman
Nov 16, 2018
8
8
6
What is the bottom magazine system used for your build? I considered the direct DBL?DBM replacements from Wyatte or PT&G, but did not want 10" of magazine hanging out from under my stock (30-06 10-rounder). Mine is a 700 Long Range as well.
sorry for getting back to you so late, on deployment so havent had much time to read through this post in a while. Its a magpul polymer long action bottom metal. Surprisingly, it was a direct fit (standard BDL), no modifications to the stock.
 
  • Like
Reactions: DRAGON64