agreed sweet set up.
VFG PelletsShooters, I need your help. I purchased a bag of Pro-Shot patches for cleaning my Anschutz 22 and there is a lot of loose fibers and the patch edges are easily pulled apart. I suspect this may be the case for any brand of cotton/flannel patches, but wanted to ask this Forum for your experience.
Is there a brand of patches you would recommend based on your experience?
Thanks!
+1 on the VFG pellets if you can find them.
You must’ve bought all of the 6mm ones because they’re showing out of stock lolBrownells has them in stock. I just ordered another pack of 22 and 6mm pellets.
A 500 pack lasts a long time. It only takes a few pellets after each range trip to keep a barrel clean so you never have to go crazy cleaning a gunked up barrel.
You must’ve bought all of the 6mm ones because they’re showing out of stock lol
When might that be by chance? I don’t see the rimfire matches in Practiscore, just the 3 gun and 600ud matches.I will bring some to Pueblo for the next rimfire match if you need some.
When might that be by chance? I don’t see the rimfire matches in Practiscore, just the 3 gun and 600ud matches.
Sweet! I will plan on going down there for that!30 August, Belly match in the morning and PRS at noon. Bring 100 rounds for each. Plan on movers, spinners, hostage KYL, ect. 50-220 yards.
I agree with the others and like to use the pellets. But I certainly wouldn't worry of about frayed edges on your patches. Pro-Shot patches work just fine.VFG Pellets
I need to move lol30 August, Belly match in the morning and PRS at noon. Bring 100 rounds for each. Plan on movers, spinners, hostage KYL, ect. 50-220 yards.
I like SK rifle match also, it shoots as good as Center X in my rifle for quite a bit less cash.My skills finally catching up to the rifle. That and SK Rifle match:
I’m going to forsure. If I can go to Raton to shoot a 60 round match, I should be able to make it Pueblo lol .VFG still in stock at Brownell's. 500 packs for just under $40 shipped.
@Krob95 you have to do Hoser's match.
I use VFG pellets or Southern Bloomer patches. Typically at the range after a session I run 3 dry VFG's down the bore and the 3rd one is clean. For deeper cleaning I'll use the patches to distribute chemicals to soak followed with brushing and pellets for final clean. Based on bore scope images it works.Shooters, I need your help. I purchased a bag of Pro-Shot patches for cleaning my Anschutz 22 and there is a lot of loose fibers and the patch edges are easily pulled apart. I suspect this may be the case for any brand of cotton/flannel patches, but wanted to ask this Forum for your experience.
Is there a brand of patches you would recommend based on your experience?
Thanks!
Where did you get that cheek rest pad?Got my scope and trigger in I’d say it’s good for now. Sk ammo will be in tomorrow! Weekend might be kinda busy....
View attachment 7078213
It’s a WieBad cheek pad. Just check out their website and pick the one for your chassis.Where did you get that cheek rest pad?
Yes, wiebad cheek pad. I just picked one up from redsnake tactical and I like that one better. It has a gel insert much nicer.Where did you get that cheek rest pad?
I got the shipping notification on my barreled action today as well but my expected delivery date isn’t until MondayI'm not normally a religious guy, but...
HALLELUJAH, GLORY BE, and AMEN!
View attachment 7363443
For those still waiting and wondering if they're next, ordered April 29, shipped today.
Yeah. Not sure which is harder, waiting the 8+ weeks for the build, or the 3 days for it to ship across the country. Kind of like having a kid. Lol. And don't think for a minute there won't be lots of baby pics of my firstborn Vudoo.I got the shipping notification on my barreled action today as well but my expected delivery date isn’t until Monday
I would have paid for faster shipping if I would have thought about it lol
I think the shipping wait is going to hurt worse knowing it’s so close but still out of reach. At least you’ll have the weekend to get acquainted with your new addition.Yeah. Not sure which is harder, waiting the 8+ weeks for the build, or the 3 days for it to ship across the country. Kind of like having a kid. Lol. And don't think for a minute there won't be lots of baby pics of my firstborn Vudoo.
It will be worth the wait.Yeah. Not sure which is harder, waiting the 8+ weeks for the build, or the 3 days for it to ship across the country. Kind of like having a kid. Lol. And don't think for a minute there won't be lots of baby pics of my firstborn Vudoo.
Thank you. This just made my day a little better.I'm not normally a religious guy, but...
HALLELUJAH, GLORY BE, and AMEN!
View attachment 7363443
For those still waiting and wondering if they're next, ordered April 29, shipped today.
UPS has already delayed the delivery on mine
Tough times we are living in.UPS delayed mine till Monday. And my gun shop is closed on Monday’s so I’ll be waiting till Tuesday
I stopped in at my local shop, brotherhood arms and picked up a barreled action today. They had a few others left on the shelf yet, so no wait time for em. Threw some random parts at it that I had laying around so I can clean up on some critters over the weekend.
It’s a 56mm objective and either low or medium rings. Better chance of being lows but I can’t say for certain. Sorry I spend a lot of time just shooting and not on notesLooks good. Can I ask what the objective diameter is on that scope and what height M10 rings you are using? Trying to figure out what ring height I need.
Thank you. I have a set of the M10's mediums laying around that I would guess should work with the ATAC-R I plan putting on whenever it decides to arrive. The NF 56 mm objective has an outside diameter of 65 mm. If you get a chance and would like to help me out I would appreciate the outside diameter of your scope objective. Is that a 30 moa rail?It’s a 56mm objective and either low or medium rings. Better chance of being lows but I can’t say for certain. Sorry I spend a lot of time just shooting and not on notes
Well it looks to have an OD of 65 mm also. So I just might be in luck.Yes I will but it may be Sunday before I get back home to some calipers. It’s a 25x tanget theta if you are able to look up those specs
Thank you. I have a set of the M10's mediums laying around that I would guess should work with the ATAC-R I plan putting on whenever it decides to arrive. The NF 56 mm objective has an outside diameter of 65 mm. If you get a chance and would like to help me out I would appreciate the outside diameter of your scope objective. Is that a 30 moa rail?
Thanks again,
Gjmen22
MTU or Kukri barrel profile?I'm using the M-10 mediums, 60 MOA rail, with my ATACR. No problems. There's about 1/8" of space left between the bell and the barrel.
What barrel profile? MTU or Kukri?Lows would be really close. I run 1" rings and there's a small amount of clearance, which can vary based on what sort of caps you're running or if you want to run a bikini, etc.
I was considering the ARC Low's but they're .94" and I felt they were too low, so I went with Seekins 1". I run ARC mediums on my other rifle.
30MOA rail.
Actually, it's the Specter profile. I wanted to trim the weight.MTU or Kukri barrel profile?
Well mine will have the MTU profile so I don't think I can use your measurements. But thank you all the same.Actually, it's the Specter profile. I wanted to trim the weight.
I always forget that my configuration isn't the norm. Imagine that!Well mine will have the MTU profile so I don't think I can use your measurements. But thank you all the same.
KukriWhat barrel profile? MTU or Kukri?