MPA 223 barrel for an Apollo or Axiom , 21” , low round count. $175 tyd pp ff

Hello,
I’m relatively new to posting but have been shooting for several decades

I have a high end rifle but don’t want to bash the company so I won’t post the manufacturer. Need less to say I’ve put $10k into this setup. Bartlein lapped barrel. Nightforce scope .

I’ve been reloading for a 338 lapua. I’ve shot hundreds of rounds now through it and have found a good speed node. SD are always under 10. The best group at 100 has been ,75”. My friend whom has been shooting long range for decades shoots it the same.

My hand loads are all weighed individually within .1 grains of h1000. Same brick of CCI 250. I’ve used a comparator on all my measurements and the shoulders are bumped back .002”. Base to ogive are all within .0005. In groups of five I’ve seated from touching the lands to ten thou off in .002 increments. I’ve tried 250, 300 and 285 all with these methods. All match grade. I even bough a concentricity tool and none of them are over .0002. All Lapua brass. All Redding full length sized with .002 neck tension. I even wipe them down before single feeding them

I torqued all the bolts, rings, scope bases to the manufactures spec. No brake strikes. Put a bore scope down it and can see anything other than minor scratches. I cleaned it too.

i can hit a 3” gong at 500 with my 6,5 Tikka very consistently. I’ve had 1” groups at 400 under ideal conditions with my Tikka. I don’t think it’s shooter error. I use my parallax correction religiously.

I think that’s as thorough as possible.

i took them out to 200 thinking the group would improve due to the fact the manufacturer claim it’s yaw but at 200 the best group I got was 2.5”. Some are over 3” At 500 I’d get a hit and then the next shot would be way over a foot off. 2km winds.

Am I just burning money and have a bad barrel?

Almost complete; bolt needs extractor modification, lugs need to be lapped, needs a recoil lug. Action has been trued, base holes have been opened up to 8x40. Ready for you or your smith to finish,

Comes with:
Remington 700 receiver / bolt / trigger in the G669xxxx serial, was 7mm mag (used)
Nightforce 20 degree 8x40 L/A extreme base (new but now mounted)
Larue OBR 111 34mm 1 piece rings (used, near new)
Lilja Mk13 mod 5 barrel in wrap (new)
9 mags (used)
Harris bi pod (used)
take off sling (used)
cleaning/ tool kit (used)
Dewy rod and chamber flex rod (new)
bore guide (new)
rifle tag, manual and log (new)
Return stock and Pelican case (used)
Schmidt & Bender PMII PSR, Pantone 5-25 x 56 , Tremor 2 (used as pictured)
Knights MkII SR 25 suppressor (currently o form 3 at my dealer (new)


$11000.00 shipped. Receiver must go to FFL Suppressor must go to class 3 dealer

Looking at getting another thermal and don’t use this guy.

It’s in amazing condition…less than 200rds fired.

X300u-b is brand new.

$2100 shipped without X300u
$2350 shipped with x300u

WATCH: L.A. Driver Who Hit Mom and Baby Killed After Getting Light Sentence
https://www.breitbart.com/crime/202...who-hit-mom-baby-killed-after-light-sentence/

Guess someone took out the trash…

Or course, I am sure the little nar nar was just about to turn his life around?

Cheers,

Sirhr

Staccato P like new, less than 200 rounds through it. $1900 shipped.

Dan Wesson DWX, like new…less than 150 rounds thru it. 3 mags. $2050 shipped

Imm running 2 rear sights on my ar.It helps me keep everything in front as long as its lined up im dead accurate. Has anyone else tried this?

So I have a 6mm CM with a 24in light varmint barrel. When the barrel is toast I'm going to switch to a 308 win. I'm thinking of trading a buddy some work, and he has a kelby atlas tactical action he'd give me for it

I like the 6CM, all I do is shoot from the bench and prone, from about 1-500 yards for groups, but I'm regretting a few things. One being barrel and maybe wishing I went with a heavier contour. After about 5-8 shots I'm getting mirage, And wishing I got a 26" instead of 24".

I've looked through the forums at length and the 6GT and dasher interest me. All I can find on the 6GT is "6 gay tiger." Which doesn't really tell me much.

Im looking for a cartridge that will shoot 107 smk and under, want something easy to load for and tune, and isn't a complete barrel burner. Any suggestions? Or opinions on what your favorite 6mm cartridge is?

The dasher interested me too because its less powder. Less powder for me means money saved to shoot more.

Like New kestrel 5700 elite w/link and AB
650$

Only willing to sell local. Price is firm, selling to purchase another powder.
located in the San Antonio area
Price is 1050

up for sale is my new Benelli M1014. only put 30 shells through it to function test it after first unboxing it Open to trades of anything close to value/and or with money on top on either end. priority is full sale. transaction will be through FFL only. $1700 plus S&H. Thanks for looking!

Like new
I have pilots for .300 norma, 6.5 creed, .6 dasher and 6 br that I can include. The gray ops holder is included.
Asking 1300 shipped.

Random thought. I've been listening to a ton of different outlets on the details and implications of the new "final" brace rule by AFT and one guy (firearm lawyer who has a YT channel) recently mentioned something about the IRS being able to prosecute someone with up to 6 years (I think that was the number?) instead of the normal statute of limitation of 2 years if the defendant was shown to willfully avoid paying taxes? In this situation with the brace rule, the tax stamp forbearance. Is this why they want to hire 87,000 more IRS agents? Will they be transferred to the AFT to prosecute people for the brace crap? Thoughts? Am I totally off my rocker or should I stop pouring the Crown Royal tonight?

Selling my last 3-18 Razor. This is Mil/Mil w/ EBR-7c reticle. Has been minimally shot by me on a 6.5 and currently sits in a Spuhr SP-4001. There is a small nick on the windage turret as shown in pictures but otherwise in great condition. Ideally looking to sell as a package deal. Will include original packaging for both optic and mount. $1550 OBO

I’m wondering if I am fucked on this or if anyone has amended such. I efiled Form 4 on 4 suppressors In April. Just got 3 disapproved notifications in. My dealer did the paperwork on these and submitted them. Do I start over and go to the back of the line? I will call the ATF tomorrow and see what they can tell me.

This shit is getting out of had... its happening nearly every day

12 people injured in shooting at Louisiana nightclub - KSTP​

https://kstp.com › associated-press › ap-us-international


36 minutes ago — The shooting occurred inside the Dior Bar & Lounge around 1:30 a.m., said Sgt. L'Jean McKneely Jr., a police spokesman. While no arrests have ...

SOLD


1. Aero Precision quad-rail floating handguard with barrel nut, 7.3". Original box, shims and hardware. $50 shipped.

Possible trades: Cane's Caniac combo with a large root beer.

Venmo preferred. (Zelle or M.O. accepted)







Thanks for lookin'!

sold $1990 shipped to your FFL. This is a special price for the Hide and is listed on other sites. Subject to sale anytime. This is a close copy of an M203 as used circa Desert Storm. The AR has a detachable carry handle upper from Brownell's with Brownell's bolt and a tuned upgraded trigger that breaks at a crisp 4.5 pounds. Brownell’s Retro A1 rifle length barrel assembly. Chambered in 5.56x45, the chrome lined barrel has a 1-7 twist and finished in black phosphate with an overall length of 20”. Muzzle threads are ½-28 and features a standard rifle barrel extension. The assembly includes a front sight base, .625 No F Marks, sight post, detent, spring, sling swivel, rivet, flat delta ring, barrel nut, weld spring, snap ring, and triangular handguard cap. PSA unmarked lower. The Spike's 37mm launcher has been modified with an M203 barrel mount. It has been Cerakoted in period correct Sand color as used for the liberation of Kuwait City. The 37mm launcher can use 5¾" U.S. Coast Guard approved flare, smoke, or gas rounds for field operations or training. A single push of the button quickly opens the launcher to remove a spent round and insert a fresh cartridge. STZ pushbutton cylindrical breech lock is far stronger than lever locks typically used on this type of launcher. Price includes period sling and sling mount, one steel 30 rd magazine, and redacted photo of 10th SFG(A) in Kuwait City. Nothing else in pic is included. The pic is of My ex-10th SFG(A) teammates at Kuwait International Airport during the liberation of Kuwait City immediately prior to the Invasion of Iraq. An M203 is carried by the brother on the right with the launcher in sand camo. My commo guy has an MP5SD.

Video. The TPT shells loaded with chalk dust were going though the cardboard.
Login to view embedded media

Looking for some recommendations for a cheaper alternative to my lapua brass? I have 500 pieces of 223 lapua that I would like to set aside for match ammo and then load some cheaper brass and bullets in bulk for positional shooting and prarie dogs. Have tons of 55gn bullets that shoot great and are cheap I just hate having the lapua brass broke up into 2 different loads/lots.

I was thinking starline if its decent, any feedback or other suggestions? Looking to pick up atleast 500 maybe 1k so I’m not loading all the time for pdogs and practice. Would be nice to have a bucket of loaded ammo.

looking to move things I don’t need or use anymore Burris xtr rings have all inserts 130 shipped krg Xl arca rail 50 shipped Lyman m5 manufactured by ohaus 60 shipped

New Manners MCS-EH1 Elite Hunter mini chassis. M5 inlet. Rem 700 or clones. Right handed. Proof carbon sendero barrel channel, 2 sling studs and 2 flush cups. Carbon fiber with black camo. $775 shipped.

Tom Cruise has nothing on this guy.

Former Navy pilot Royce Williams shot down four Soviet jets​

https://www.msn.com › en-us › news › world › former-...


13 hours ago — This real-life Korean War “Top Gun” kept his war story secret for 50 years. In 1952, then-U.S. Navy pilot Royce Williams engaged in possibly ...

More gun control rhetoric inbound