ready to run surgeon 223 rem trainer. comes as pictured with a 308 bolt
A5 stock
timney trigger
area 419 arca rail
surgeon bottom metal
short action precision 2 round holder
barrel on the gun is a 223 rem. the spare bolt is a 308 win.
ships to your dealer.
$2150 shipped and insured to your dealer
payment can be USPS MO, cert. check, zelle, cash app. I cannot take venmo or paypal.
can send more pics to anyone interested.
not interested in seperating the barreled action at the moment. looking to sell all together.

Login to view embedded media
San Berdino CA tax payers on the hook for half a million because one of their finest had a sore pussy.

everything pictured is included. autotrickler V3 used until my V4 arrived. works great
$410 shipped and insured
SPF

I can take payment via usps mo, cert. check, zelle or cash app. I cannot take venmo or paypal

SOLD
SOLD Armageddon gear tripod caddy in multicam
SOLD

SOLD
SOLDRSR sc-arc bipod clamp new in box never used
SOLD

I can take usps mp, cert. check, zelle, cash app for payment. I cannot take venmo or paypal.

So this is a first for me got my cleaning rod stuck in my barrel about 3/4,way down the barrel.

300wm in a brux barrel. Using a Dewey rubber coated cleaning rod and bore guide .27 brass jag and .30 cal patches off set. I thought my best bet was just tap it down the barrel since that was the shortest path and I couldn’t pull it out or push it by hand. so tapped the handle with an hammer and the jag came out clean no patch on the end so now it was stuck. Pulled with all my might with no success. So I put some pliers on the end and tapped the pliers with a hammer and the rod came out fairly easy from the breach patch fell out as well.

Ran out and shot it and it seems to still shoot one ragged hole. Think I have anything to worry about?

The rod has light scratches and marks on the rubber and the jag maybe had some blemishes. Hard to say if it already had them or not.

Am I over reacting?

I would think steel barrels should be tough but I also think banging rods down barrels is not healthy either.

I'm building a new custom Santa Maria type grill similar to the Hooray grill.
Is it worth the considerable extra expense to make the actual cooking part of the grill (30"x60") out of stainless steel ?
Would 1/2" round or square stock be better over time or is that a Ford vs Chevy question ?
I'm thinking about putting in square stock 'set up' like a diamond instead of square, kinda like an Argentine grill.
Thanks

Elite iron panning revolution bipod standard pic height with mountain feet. Used once in perfect condition.

500 shipped

Howdy everyone. Thinking of selling my DMR 2950 6cm as a barreled action. I had Dane put this together in June 2021 and it has sat in the safe ever since. I have not fired it. Only test fired. Here are the specs:
Curtis Axiom
26” Bartlein Heavy Palma bead blasted finish
TriggerTech Special
Gen 2 Little Bastard 5/8-24

Note the first few pics are the pics sent to me while Dane was building. The pic with the salt water camo KRG is how it sits now in my safe. $2750 shipped to your FFL. FFL must accept shipment from individual.

Happy to answer any questions. Thanks!

Have a Game Changer with standard fill. In excellent condition with a couple of holes that have been stitched shut. Shown in pictures.

$80 to me shipped to you.

50% off an MDT HNT 26. $400 TYD

Hello everyone I’m looking for some answers here I’m lost.

I bought an M1a and I’ve been on a mission to suppress it. I got an adjustable gas plug, and a smith enterprise thread adapter. I also have a keymo adapter for my sandman L.

I timed everything it seems solid I went to fire it through my suppressor and now we have a problem. Unsuppressed my groups are tight. Suppressed my rifle won’t group. Upon inspection it appears there is a glance on my end cap there is also copper flakes on my keymo adapter.

To be clear there are no markings or glances off my smith enterprise or my keymo muzzle brake. Just on my end cap.

Photos are attached.

Thanks

Zero Compromise Optic (ZCO): ZC527 5-27x56 FFP with the MPCT1. Scope is mounted in a Spuhr SP-6016 with a low profile accessory rail. The scope is 100% mint. Switching my AR10 to a dedicated thermal.​

$3,800 with Spuhr
$3,600 optic only

Rifle is a DPMS upper
Bushmaster lower
BA barrel- 16.25 inch
Aero parts kit
Rise trigger.
Brand new strike Eagle 1-6.

Yes a franken rifle . Getting this mishmash of parts running was what brought me here and she runs well.
So not a precision rifle - more of a DMR (don’t t really like the term, or maybe not exactly sure what it encompasses)
Accuracy load is Hornady brass
CCI primers . And the best node seems to be right around 43-43.5 Varget.
Projectile is currently 168 match monsters or whatever such MidSouth called their bull pack- made by Nosler i believe

This rifle has surprised me with its accuracy for a franken gas gun.

So I’ve shot this rifle a lot this winter and maybe I’m expecting to much


The first target - and these are not necessarily cherry picked but fairly representative of what I get with this load
First target is 43.3 Varget - yes only 3 shot group for this one as the first 2 with this ladder were my spotters . But 3 into .625 and the first shot is the low flyer .

Second target is a 5 shot group for all you purists . 43.5 Varget. First round is again the flyer and about the same amount high this time .

100 yard range - bench with bipod and rear bag. Trying to use all the skills I e learned here and through regular trigger time .
Is what I’m seeing on target just what I can expect from this gasser of none premium top shelf parts ?

Is the 1-6 or maybe because it’s a dreaded and derided Vortex ?

Or is there a know formula/ problem that causes first round flyers ? A possible mechanical problem with the rifle ?

A structural problem with my technique.
I’ve not noticed this phenomenon with my other gas guns or with bolt guns . But I have made this rifle my do everything sorta deer bear boar target rifle and been working on shooting it well all winter .

This is a new optic- a direct replacement for the same that stopped working correctly.it was the older gen 1 and they replaced it with a gen 3 . Before the vortex glass this rifle at first wore an older Nikon monarch of higher magnification and I often noticed this first round flyer but didn’t have the knowledge to really see anything wrong with it 3-4 years ago.

#### SOLD ###
Gents,
I have a New, as in just delivered, 6mm GT barreled action that I probably do not need. Here are the specs,
1. Impact 737R, non-AW cut.
2. Bartlein M24, 26” 7.5 twist, threaded 5/8x24”, Area 419 Match brake.
3. Cerakoted Black.
4. Huber 2 Stage, set at 1.54 lbs. Its their Melonited Steel trigger.

$2500 + shipping to your FFL.

I have it mounted up in a MDT ESS chassis if you’d like a ready to go build. I have ARCA rails, and weights for the chassis. I can probably cut a pretty good deal on it if it goes with the BA.
I could use some 6mm ARC ammo in 108’s as a possible partial trade.
LMK if you have any questions, Thanks for looking.

ST42

We called Viet Nam a 'quagmire'. Then Afghanistan.

When I look around today, it appears that the whole world has become a quagmire.

Draining the quagmire doesnt help unless you also cut off the spring thats feeding it. The spring feeding the quagmire of the world is Evil.

Maggot out.

Mk13 mod 5 built by Redbull Armory on a deployment kit. Stiller mk13 Garland marked action. No optic. Comes with everything shown except for optic, and that can be negotiated if necessary. 240 rounds down the pipe. $10,500 shipped to your FFL.

Thought this might be a fun topic I don’t often see discussed here, but how about a thread dedicated to sub-caliber (anything below .22) rifles?

I recently got bit by the .17 bug, and would honestly love a .20 as well though that may be awhile yet. I have a .17 Fireball and will be picking up a .17 Ackley Bee next week, but anything sub-cal would belong here no matter how obscure. Calhoon stuff, Ackley stuff, .10s, .12s, .14s, .17s, 19s, .20s bring it all!

To start, since I’m pretty new to this stuff, I’m powder shopping for my two. I realize the .17AB and .17FB are both relatively close-ish in performance, but the prices were right so I pounced. I was initially hoping for a .17 Hornet and a Fireball, but holy hell the going prices for anything Hornet are crazy these days! About the only rifles in mass production for it would be the Savage 25, which gets mixed reviews and sells for way too much for what it is IMO. Ruger and CZ are both put of the Hornet game, and both of them sell for STOOPID money most of the time. I still want one, but it may be awhile…

So anyway, the Ackley Bee will have to do in it’s stead. If anyone else is shooting these, I’m open to powder suggestions. Benchmark and 8208 both come recommended, but are both hard to find and expensive when you can find them. I’d prefer something relatively temp sensitive and less expensive, but that combo may be a unicorn right now. TAC, CFE-BLK, H335, and VV N120/130 are less expensive options that seem to get good reviews as well, so I may order a pound of each in a bit and start load development to see what I can get.

So, what’s everyone else shooting, if anything?

I am going to start shooting steel challenge and production class and am already looking ahead and think about shooting limited and posible open at some point...I think open may be a bit much for me right now but you never know. I would like to hear from guys that are or have shot in these divisions and advise on who are some of the best builders for open and limited.

And lets just pretend money is not an issue....I've been looking for a few months now and seems from about $3500 and up is the price point for a nice limited and or race gun.

Theyre joining gas stoves in being 'regulated' (read: priced out of your budget). Wouldnt want the serfs being too comfortable.

Biden admin cracks down on air conditioners as war ...​

Fox News
https://www.foxnews.com › politics › biden-admin-crack...




1 day ago — The Biden administration announced its latest home appliance regulations this week, targeting air conditioners in an action it said would ...

This is a brand NEW 52" GA Precision Tactical Operations Drag Bag. 50" internal Length - This thing has everything. Even a padded shooting mat. Zippered pouches everywhere. Suppressor pouch. It also has padded shoulder straps that can be pulled out of one of the pouches. It is probably the best rifle bag you can buy. I have never used it. I received it a month ago. I just dont need it.

These are about $375 new (w/shipping)

Im asking $299 shipped UPS CONUS

** I know I am a new seller but I have bought a few items on this forum. I'm also a member on other forms if you need to look there..

Looks like those evil oompa loompa's are at it again folks.
I wonder if they are being contracted by that shirtless guy?



Login to view embedded media

Y’all send some prayers up for these folks. Looks like it was a doozy. Anyone on here from around there?

I keep seeing disclaimers on gunbroker auctions stating that insurance is not included and/or costs extra. Not just from private individuals but also businesses.

One in particular was concerning to see because it looked like they wouldn't accept credit card payments if you wanted to fully insure the rifle. I'm not going to buy that particular rifle, mostly because it has hit crack smoking prices, but I generally prefer credit card for these types of transactions just so I have some protection from fraud. But suppose I did buy it and it never showwd up, or showed up damaged. Would the seller be able to stop a chargeback with those terms listed?

6lbs and change H4350. 5lbs and change H1000.

$300 shipped H4350
$250 shipped H1000

Sal 504-813-2904