The new Palantir cross department data sharing contains all manner of concerning things, but one I don't see anyone talking about is that it will be tracking every single firearm and ammo purchase and making those records available without warrant or really any justification across federal departments.

Everyone thinks this is a good idea?

gonna rebarrel my (shot out) single shot (short action Rem 40-X) 7mm mag to 7PRC, loaded for 180s. Current barrel is 27.5", but it has a brake. New barrel will run a TBAC Magnus RR can. I ordered a Krieger w 28" finish length, but I'm beginning to wonder if that's going to be too long with a 10.5" can on it. Shortest I would go would be 26". Going to 28" will get me ~50fps more velocity. This will be a varmint slayer (Sendero profile, heavy), so won't have to carry it anywhere

When does barrel + can on a traditional bolt gun get so long as to be a mistake?

Got this in a trade and not really my thing. Front sight is fiber optic and the grips are aftermarket. Price is 1000 shipped, buyer covers any payment fees.

Box not included

Prices are shipped, willing to sell as a package for less or prices individually below:

Dillon S000022 XL750 Progressive press, new in Dillon Box - $SOLD
Dillon 22059 Quick change kit for XL650 / XL750 (QTY 2, new in box) - $SOLD each
Dillon 10443 Machine cover for XL650 / XL750 (new) - $SOLD
Dillon 17950 Roller handle assembly (new) - $SOLD
Dillon 21101 conversion kit for .222 Rem Mag , .223 / 5.56mm , 22 nosler for XL650 / XL750 - $SOLD
Dillon 10096 Carbide .223 rifle dies (3, new) - $SOLD
Dillon 14406 Pistol dies 9mm (new) - $SOLD

Looks interesting. For a CMMG conversion kit.

$2950 Shipped.

PayPal F&F, postal money order, or check (will wait to ship until it clears) works best for me.

Tangent Theta 3-15 hunter model. Mil version. The scope has been hunted and shot with alot. Has some scuffs from rubbing on buckles on a pack, and little dings and nicks on high points. Glass is flawless and just came back from Tangent Theta for a service.

SOLD PENDING FUNDS

Original Owner

• AICS 2.0
• Fits a Short Action M700.
• Was bedded for a Surgeon 591, so may require minor mod if bedding a standard M700 SA footprint.
• Everything works great, folding hinge is like new, solid and straight.
• Stock was bedded and cerakoted by APA in 2010 and has some scratches to the paint, but the skins are completely intact.
• Includes Atlas BT10 Bipod with AICS adapter as shown.
• $1,600 shipped, or trade for MDT ACC Elite Chassis M700 SA, RH.

PayPal FTF, Venmo, or Money Order accepted.

PM me with questions.

thank you,
Jason

Selling one of my donor barreled actions. Good start for a late M40A1, M40A3, m40a5 or A6 build. Action is stripped with no bolt.

$500 shipped to your FFL

PayPal or venmo

Looking for a few parts for an Area419 Zero press:

Hybrid turret
Bullet tray
Bullet seating plate
Turret Dock
Zero Storage block
Extra die rings and wrench
Bullet / cigar tray
Inline fabrication 7.5" quick change ultramount

Message me and let me know what you have!

Pics added below

Lightly used Kahles K525 DLR RSW
Includes Paralax Spinner & Throw Lever
Tenebraex Caps
Neoprene Cover
Box, etc

$2500 PP/FF or trades for NF Atacr 7-35(Mil) or Razor Gen3 (Mil)

In excellent condition only 400 rounds fired through action and barrel. Never tried ammo brands or lots other than cheap Norma tac 22 which shot great. This comes with the upgraded bolt from Zermatt and it runs smoothly without issues.

30moa base
Proof 20” 22LR 1:16 SS competition contour barrel
Triggertech special 2 stage flat shoe trigger

$1375 shipped
PP F&F/Zelle

Individual shipment FFL

Has anyone switched stocks that have pretty much the same ergonomics and seen a noticeable difference in their performance behind the trigger? I switched from a PRS1 to a TCS for my centerfire comp rifle and for some reason I’m struggling to get the same level of accuracy, now I wondering if it’s just mentality messing with me or something else.

I really noticed a difference yesterday when I was bouncing back and forth between with my other rig that’s still in a PRS1 and the TCS, everything felt very similar but there was just something off just don’t know if it’s mind over matter or actually something different enough to make a difference.

My mom inherited this Mauser from her late father, none of the family wanted it so she took it. I looked into it a bit and found that it is a desirable one, but missing some parts such as front sight hood and cleaning rod. Are there any companies that sell replacement parts or manufacture new ones? I’d like it to be as close to 100% as possible. Thanks

I have for sale a 2014 quick lock, AI AT that has been installed in an Accuracy Obsession chassis with an AX butt stock conversion, GTAC AR pistol grip conversion, and AI competition trigger.

The action is bedded into the chassis just like it was in the original AT chassis. The AX buttstock conversion also required bedding. I bought the rifle used just for this project and have long since sold off the original chassis. It has a Hoptic check pad(plus two spare replacements), a PLF338 3D printed bag rider along with the original AI bag rider. MPA EVG grip. The competition trigger is set to what I would guess is 1.75lbs and has never had a hiccup. It has been 100% reliable so it's kind of a unicorn. The chassis comes with two internal weights. A 1lb and a 2lb. It has full ARCA and MLOK. The rifle will come with one mag. Your choice of the modified AW that has the +2 MDT extension or an unmolested AW mag. No barrel. No scope. The chassis has some cerakote wear marks and the bolt face has some fire checking from the previous owner pushing 308 and Varget hard. I've had no issues with the bolt or entire rifle for that matter. The bolt is stupid slick. Large Primer firing pin. Everything functions and shoots well. The 6.5CM and 6CM barrels shoot really damn well. $3400

Available to the buyer is a total of 10 AW mags.

9 additional mags $500

Proof AI prefit in 308W. 26", 1600rds $600

Proof 26" full bull 6.5CM by Fritz at Black Canyon Customs. 560rds $800

Proof Comp contour 6GT, 24" by Straightjacket Armory. 1200rds $300

Proof Heavy Palma 6CM, 26" by Straightjacket Armory. 680rds. $300

$1200 for both CF barrels. $1500 for all four.





300yd groups
Must ship from FFL to FFL.

Getting interesting near Naples.

Campei Flagrei make’s Vesuvius look like a party favor.

Meh… southern Europe can fend for itself

Sirhr

IIRC someone here called this a couple weeks ago . So is this the Event that the Gubment uses for more Patriot Act type Bullshit or some unhinged Democrat ( there are unhinged ) acting like a Democrat ?
Occam's Razor or SSRI Falayvaaa ?
FBI investigating 'targeted terror attack' in Boulder, Colorado, Kash Patel says

Like new 2.1+, used to film one video.

$500 shipped. SOLD

2.1+ is the new version that can be used on larger oculars like the ZCO.

I’m listing this rifle as a package for sale locally (Danbury, New Hampshire). If a period of time goes by I will be open to negotiating shipping and / or parting out.

This rifle started out as an Area 419 “Package Rifle” (https://www.area419.com/product/cz-457-mtr-fully-loaded/). The Wooden MTR Stock was upgraded to an MDT ACC Premier Gen 2 Chassis. It has their (Area 419) bolt handle and 30 MOA picatinny rail.

Mounted in Vortex PMR 34mm Rings is a Vortex Strike Eagle 5-25x56 with a MRAD EBR-7C reticle. It has been upgraded to Vortex Defender Flip Caps in lieu of the rubber stretch cover and includes the box.

Also included is the OEM CZ Magazine Block and Magazine Release. When upgrading to the MDT ACC Premier Gen 2 Chassis MDT provides an extended version of both to be used with the chassis.

(2) Magazines are included

• (1) CZ 457 OEM 5 Round Metal Magazine
• (1) L3I Cz 457 13 Round Billet Magazine

This rifle has 250 rounds of Lapua Center X through it and is no slouch (see photos from target used to zero the scope on 6/14/2024)

I’m left handed and have a couple “right handed” rifles I kept around for training new shooters. There are no issues with this rifle and would make a great turn key setup for NRL22. . .

If you’re in New Hampshire I am the Match Director for NRL22 Shoots hosted at the Pemi Fish and Game Club in Holderness, New Hampshire. I’m willing to let a potential buyer shoot the rifle at a match.

I will also include the Data Book (from the Sig Sauer Sniper Course) and Data Book Cover pictured. Feel free to ask any questions.


$2,200.00 local sale. I’m not looking for any trades at this time.

If I do part the rifle out the optic and rings need to sell first. . .

$1,600.00 CZ 457 as described above*
$600.00 Vortex Strike Eagle 5-25x56 MRAD EBR-7C*
Price is for local sale, shipping not included. If a few weeks go by I will consider shipping for actual cost.

Login to view embedded media
Actually pulled him right out of his house - we really need increased police presence to put a stop to these horrible crimes.

Everyone and their mother has a different cleaning regime. Different products, different process and different definitions of what cleaning is.

For many years my cleaning process for precision rifles has been follow boretech instructions. Maybe do a cycle or 2. Gun shoots well again and is good for 100-300 rounds before next cleaning.

Then I got a borescope. And I realized how much hard carbon builds up in the grooves , especially in the first 10 inches of a barrel. I suspect I am not really cleaning the barrel fully each time and just adding layers of hard carbon and copper. When I clean I am stripping most of the copper and leaving in carbon? Maybe.

Now what really matters is how it shoots. Is the gun predictable? Does it hold zero , velocity and shot group size over a 250 round weekend?

I am not so much interested in your cleaning regime as in your philosophy on cleaning. I am positive with the right chemicals I can strip this shit out, but do I really need to?

And it goes without saying the accuracy demands, round count and requirements for something like a PRS shooter is much different than F class or Benchrest.

Do most of you feel like getting all the loose shit out of the bore is cleaning? Do you think you need to strip it down to steel to be clean? What have you experienced performance wise doing different methods?

I recently went back to Sweets 7.62 since its a much more effective solvent than Eliminator or C4, as well as using oversized brass brushes (6.5 for 6mm). It seems to pull more shit out but the brushes also wear out super fast. I might get 4-5 cycles of wet patch/scrub with brush before the brush is wore out and i feel little resistance in bore.

This video popped up on my feed, and I thought it looks pretty cool, so I thought I'd share.

I made a comment about whether it would work on a semi auto. I'm guessing not, but lots of you are way smarter than I.

Login to view embedded media

$5500 or best offer

408 Cheytac Pierce 10x action in a Mirage Chassis w/about 300 rounds through the barrel. Bartlein 35 inches 1:9 twist barrel, jewel HVR trigger, 40 MOA rail
Longest impact 3883 yards.

200--390 gr cutting edge projectiles
150--415 gr cutting edge projectiles
100--450 gr cutting edge projectiles
100--420 gr cutting edge projectiles
approximately 300 pieces of brass
1 set 408 Cheytac FL Bushing sizer and seater die
1 set 408 Cheytac FL sizer, neck sizer, and seater dies

Bipod not included. Must ship to FFL. Just don't have the time to shoot it with my current schedule.

Trump says Biden was dead in 2020?