I am going to begin participating in the NRL shoots in my area and would like to in the not to distant future also give 22lr PRS a try as well. Absolutely EVERYTHING I have read seen or heard is scopes in MILLs are used by over 90% of participants VS MOA for multiple reasons, simplicity chief among them.

I have been thinking strictly in MOA for over 30 years and would like to know if there is a methodology I can use to transition my thinking as simply and painlessly from MOA to MILLs.
As I am a complete novice when it comes to tactical scopes and have some but only minimal experience dialing for drop or wind deflection. This will also be my first endeavor into the world of tactical scopes or using the strata on the scopes reticle to make adjustments for drop and wind deflection.

My main issue is the distances to the targets in both NRL and 22lr PRS are listed in yards and if you have a scope in MILL/MILL and unless I am wrong, you will have to convert that distance into meters then figure your scope adjustments accordingly.
One other concern is I have yet to buy a scope for participating in NRL/PRS and will have to decide if it will be in MOA/MOA or MILL/MILL and need to make a choice.

If there is a good book on long range shooting that has a chapter on how a person use to MOA can transition to MILLs, please by all means someone tell me as I would gladly buy it to educate myself.

I realize there my be no other way other than to just re-learn to adjust a scope in MILLs but if anywhere on the internet would know I figured it would be here.

I mean mayflies!.. Sitting in my deerstand last few days, watching deer, turkeys, and swarms of mayflies dancing in front of my window. This is Wisconsin in November. I'm not the greatest at identifying which species, but I believe they could be baetis(blue-winged olives), size #20 or 22. My window sits probably 16 feet above ground, but these critters seem to prefer to flutter and dance right in front of me, almost like they're trying to entertain. Need to appreciate the little things once in a while. or..often.

SOLD

Right hand
SA 700 mini chassis
Scorched Earth Metallic with gloss finish
Sikes Clutch
Area 419 rail with brass weights
Would cost you $1740 plus tax to build on manners plus your 8+ month wait.

$1675 shipped
F&F payments only, Venmo, Apple Pay and Zelle accepted. Paypal if need be but would rather not.

Will get some better pics up soon.

Zermatt Arms Origin Action with Proof Prefit 6 creed, 1:7.5 twist, 26" comp contour barrel. 900 rounds through it.
Barrel Was Cerakoted Black
Will include both Recoil lugs for TL3 Prefits and Origin Prefits
Comes with action wrench as well

$1000 FFL to FFL

I think Ill get my fix and run up a couple threads.

Cleaning out my closet. Mainly looking for sales, but would entertain trades as well.

USO MR10 1.8-10 w/ qd mount and clean bill of health from uso, comes in non original box, red illuminated mil GAP - SOLD

Nikon P tactical 3-9 223 w/ original box - SOLD

Atibal hybrid12 1-12 like new full kit - SOLD

IOR 2-16 - SOLD

RHD II 3-18 EBR-2C w/ original box - SOLD Locally

STEINER Military 4-16 mildot - $1200

STEINER P4xi 4-16 SCR - SOLD


If my prices seem out of line please let me know. All prices are obo of course. Lmk what you have to trade. I take PayPal, venmo, and zelle. Thank you for looking!

I have a good used folding KRG whiskey 3 short action chassis. Gen 5. Has large tan grip panels, low pro cheekpiece, heavy angle bag rider and aluminum extended mag release. I will offer it with either the aluminum arca forend or the enclosed forend with arca rail. Factory plastic forend included along with black small grip panels

Price with enclosed forend $1330
Price with aluminum arca forend $1160

Above prices shipped in the lower 48
Discreet PayPal friends and family



I have some extra parts I will let go to the buyer of the chassis. Buyer gets first shot at this stuff. I won’t sell individual parts for a few days.

Flat heavy bagrider $50
Heavy stop $20
LOP weight $15
NV bridge $130
Spigot $110

Well got to unbox and use my new amp today. Holy shit is this thing amazing. I was one of the idiots that thought the torch and the socket were “just fine” now I realize what a dumbass I was. If you think annealing is an important part of reloading then you need one. If you think it’s to much money then sell a pistol, a car he’ll even your wife! it’s totally worth it. I got it set up in auto mode and rolled through 350 pieces of 6.5 brass like it was nothing and they are absolutely perfect and so consistent. Very impressed. Now I’m looking at every piece of brass I have and getting excited. Do I go for the five gallon buckets of 5.56 brass??? Don’t see why not lol. Anyway just thought when things are worth talking about they should be. Can’t wait to play with this thing more.

I've heard that there is a brass catcher that will bolt onto spuhr mounts.
I can't find one. Is this real? If so where should I look?
Thanks guys

Up for sale is my six month old with 300 rounds through it 22/45 lite. This has the Volquartsen accurizing kit installed in it. Shown with the Burris fastfire 3 on it I will sell it with or without. Also I am including six magazines, You will be ready to go for some steel challenge matches! 525.00 for the pistol and mags 175 for the burris fastfire it is the 8 moa. 700 for both. Also has an aluminum charging ring on the back for quick charging. I have the original parts as well. Just looking for money on this one.

So I've been dreaming of a 300 Norma or 300 PRC. I have put together a 243 with a Criterion remage barrel and it shoots fantastic. Looking to do a higher end build next, probably over the next 2 years. I have access to shoot a mile or more and there are places that go further. Shooting at KO2M would be pretty sweet, just to get to try it out. Problem is shooting it would be super expensive so really a few times a year? I am thinking swapping a bolt and spinning another barrel on and now I could shoot the hell out of it in 223 and maybe run some matches with it. Have the same stock/chassis, trigger, scope, bipod.... but shoot it for cheap and shoot it a lot. But will 223 feed in a long action? Does anybody make mags that look like a Bergara or Voodoo 2 mag that puts 223 in a long action?

Sold- 1 Mini Range Cube- 20 plus shipping
2 Flat bags- 15 each plus shipping

Venmo or PayPal only

Browning Travel Vault, made by Pelican. I have owned this case for quite some time, it has traveled some miles all over with me (hence the tape residue from labels). It's in very good condition. Measures: 50"X5"X15"
$165 shipped or $100 face to face in Maine
Sold Pending Funds
Next up is a cheap US Peacekeeper drag bag, it's 54" long. The large exterior pocket has about a 6" long section at the top of the pocket where it's started to tear away from the main bag (see picture) I used to pack this thing full and tote it all over. It's a pretty rugged bag.
SPF $75 shipped SPF

The Left wants a civil war soooo bad and they're already blaming you for starting it.

Selling my ZCO 840 MPCT 1. Excellent condition (was mounted and never taken to the range). Someone needs to give this thing the attention it deserves!

$SOLD shipped, insured

No trades

Oh boy, what a trainwreck

Login to view embedded media

RR coded Rem 700 SA with 223 bolt face. Bought this about 1-1/2- 2 years ago and had a 350 legend barrel on it, maybe shot 150 rounds. Bolt shows blueing loss from cycling. Has NF 40moa steel base and PTG .200 recoil lug. Factory trigger, bolt handle was threaded and there is a temp knob on it that I spun up on the lathe one day. Must ship to FFL and they just accept from individual. Asking 460 shipped PP F&F, USPS MO, or FTF if close enough.

Selling my lightly used SB PMII 3-20x50 ultra short with MSR2 reticle (.5 cm cw MTII MTC LT / DTII+ZC LT). Comes with all paperwork, lens covers, original box. The scope is in excellent condition.

SOLD

Not interested in trades right now.

Anyone running a 16”-18” 6 creed? What kind of velocity are you getting?

Thanks

I am currently in the process of building a DMR/SPR rifle chambered in 6mm Arc. Current set up pictured below..
I am uncertain of what optic to go with. I am looking at either the ACTAR 4-16x42 Tremor 3 reticle and the Kahles 3-18x50 SKMR3 reticle with a SPUHR/ Badger condition one mount. I have ruled out the Leupold 3.6-18 because most people have told me it is not on the level of ACTAR and does not track as well.. I have read that Kahles are a bit more fragile and have a narrower FOV which concerns me, as this is the optics I am leaning towards. Obviously, ACTAR has the resume but it doesn't have the magnification of Kahles or Leupold. THoughts?


Specs
Geissele super duty upper/lower
Mk18 Arca handguard
JP VMOS bcg
JP silent cap spring
Geissele SSA-E trigger
Proof 18" carbon barrel with surefire socom break

Title says it all, good condition DMRII 3.5-21X50 with the G2 and a 25 yard parallax. Just a little rash on the turrets from normal use, 100% mechanical / tracks perfect as all Bushnell Elite Tactical scopes. I have owned at least 7 DMRs over the years and they are the most bomb proof scopes I have owned. When I was shooting a lot I kept a DMR in rings zeroed for my rifle as a backup in case my PMII went down (which happened a few times). I am selling to move to a lighter scope on this RimX.
I can get you all the pics you want, but more will be added later today.
I would consider a trade for a Sightron SIII PLR illuminated 6-24 MIL, or maybe a Vortex LHT 4.5-22 MIL (with some cash on my end)
Sold pending funds $750 shipped without the rings

Have to stop for some cash in Lexington first……Say hello to Captain Parker!

200 rounds of Hornady 6.5 Creedmoor ELD Match. Mixed lot (3 total lots 5, 3 and 2)

$325 shipped ff