McMillan Adjustable Game Warden with Edge fill for a Remington 700 RH SA pattern action. Bottom cut for M5 pattern DBM (DBM not included). Finish is painted. I opened up the barrel channel for a proof sendero. It’s been used in matches and hunting so there are some scratches. Two flush cups underneath, one forward sling stud. One additional thread on forend (slightly off center). Price is $600 shipped.

Are you using the brass from your last barrel in the new barrel you just put on your bolt gun?

I have heard from a couple of people that a new barrel should have new brass. While this may be the perfect world answer I wonder how reasonable this is. I have brass with 8-9 firing on it that seems to be in good condition overall and it seems a shame to retire it when I spin the new barrel on.

On my first barrel change I was going from a factory chamber to an aftermarket barrel and chamber, the brass from the factory barrel was too tight in the aftermarket chamber after resizing and gave me all of the normal issues. I later resized that brass with a better die and it would have worked but I had already purchased new brass and didn't look back. I learned a lot about matching your die to your chamber during that mess.

Now I'm changing barrels again going from an aftermarket to another aftermarket barrel, not the same reamer and would like to continue to run the same brass.

Vortex Razor Gen II 3-18x50 in Black color
EBR-2C MRAD

I purchased from another Hide member. Didn't really need another Razor but thought it would be cool to have one in black. I don't have a box and I know these are rare so I have attached the receipts from the original buyer. Light ring marks but I had no issues with this scope, tracking or otherwise. Glass looks excellent.

Comes with:
- Scope
- Throw lever
- Defender flip caps
- Sunshade
- Tool
- Neoprene cover

*SOLD PENDING FUNDS $1325 shipped lower 48 OBO
Paypal ff

Hi All,

My daughter and son in law bought a newly built home about 2-years ago in a recently built subdivision next to a largish lake in between Orlando and Apopka Florida (closer to Apopka), They are in their late 20's and have two kids, a boy almost 2-years old, and a daughter that just turned five.

And then this happened this week...

Video below. It's from their Ring camera in infrared mode so resolution is pretty bad. I told my son in law that he could borrow my Marlin 1895 in 45-70 . Question is: How big is this girl. Yes, for reference the space between wall and column is 5-6 feet. Best weight guess? And I think it's a sow, with cubs. The county animal control is aware of a female w/cubs in the area.

https://photos.smugmug.com/photos/i-Cc6RTkw/0/ae64e811/1920/i-Cc6RTkw-1920.mp4

A&D FX-120i scale, never opened. $530 shipped. No trades at this time.

Took down some major shitbags…. Who I hope die in prison.

Interesting the investigative players involved! And the scope and scale of cyber investigations. And for those thinking Bitcoin is somehow anonymous… nothing online is anonymous.
A good read!

Sirhr

Where are ATHLON scopes made

Needing a manners or McMillan stock for Rem700 short action. Lmk if you have anything thanks!

PCSing overseas and don't want to deal with storing all of my gun stuff. Since Covid really haven't been able to shoot much. My house is getting remodeled so a lot of my stuff is in boxes. I will edit this thread and add more things. If you don't see something here please ask if I have it. Everything is negotiable. You pay shipping.

I work in an environment where i can't have my phone. I check it a couple times a day but most response will be in the evening. Please be patient.
-Long range muzzle loader - base remington UML - smokeless rated 45 cal brux barrel, trigger tech trigger, bullet swage/die, area 419 Rail, harris bipod, primer modules. Used one season i was getting 4 in groups at 600 yds with black horn 209 - $2800 w/o scope
- GAP trued 6.5CM (approx 1200 rnds) -timney trigger - make offer
- Giruard annealer - all wheels and plates - $500
- Razor spotting scope 27-60 - $1200
- 2x Razor Gen 2 4.5x27 w/MPA mounts - $1800 ea
- Leofoto 284 CEX with rrs arca mount - $400
- Proof Research ruckus prefit never fired 6CM - $500
- Dillon 550 - with stand - 15 tool heads - auto throw - 223, 6gt, 6CM, 28 Nos, 224 Valk, 339LM can discuss dies included/added - $1000
- Strike eagle 1-6 with vortex AR mount $ $300
-Venom Red Dot - $200
- FN 509 Tactical with RMR and parker mountain comp kit - $1400

Saw this elsewhere. Jeez

Looks like he got scratched.

[IMG alt="Sean the Nailer"]https://www.snipershide.com/shooting/data/avatars/s/8/8362.jpg?1555433842[/IMG]

Sean the Nailer​

Sergeant​

Banned !
Minuteman

• 
• 

Hello everyone! I’m new to the gas precision rifle game and I’m looking for good AR10 precision barrel recommendations in 6.5 creed. I want to be able to have it machined so I can throw on this legacy Surefire break and can. Price point is not an object. Thank you in advance for all everyone’s help!

$125 shipped. Same lot number.
9 new, unfired.
190 once fired in a tikka t3x 223.

WTS Autotrickler V3 with a few Area 419 goodies. Comes with the original items. Purchased this from a member on the hide but my V4 came in. Ready to ship, $500 TYD PayPal F&F.

Atlas cal with adm mount and spike feet in good condition.
$200 shipped.

Athlon Helos BTR gen 2 6-24 mil. 50 moa base on a CZ 455. should be sitting about 7 mil off the bottom, but it has been cranked to the top several times. I noticed when I switched from CCI SV to Eley Tenex it seemed to shoot flatter and not need as much elevation to hit at 110. a week or so later I'm back to shooting CCI and I'm hitting way low at 50. after 100 rounds or so I've settled back in at 1.0 mil to hit at 50.
Did the reticle move on the threads when I topped out the scope? It shouldn't be from bottoming out, I've got the zero stop in.
I'll mess with it some today, crank a mil or so and see if it tracks or not. If it seems to be working I can just rezero the turret and move the zero stop, but there should not be a shift of a whole mil at 50 yards.
Set the turret in the middle of its travel and give the gun a few bumps? See if it gets worse or better, or different?

It seems to me that CCI SV is the highest end of cheap bulk and the beginning of what could be considered target and match ammo.
It is cheap and plentiful. My CZ seems to shoot it pretty good. Tonight I shot a bunch of 5 shot groups, had a few where 4 shots were a cluster and then that one damned flyer... But then I got that one group. It may be my best ever.
I would like to see what others can do with the same ammo at the same distance. CCI SV 50 yards.
Here's mine. 3 pictures of the same group.

Thank you very much? No, fuck you very much!

Now maybe this is common knowledge, but I'm mostly self taught & I've never seen it discussed.

Recently I was loading 400 rounds of 6.5 Creedmoor.
In my reloading process typically the last steps are to lube the neck with graphite, mandrel, powder, & seat the bullet. On this batch of 1 x Lapua I noticed the mandrel was pretty tight. These were annealed the same as all previous so I thought it odd, then a light bulb went off. Looking at the inside of the mandreled neck I could see that the mandrel had a very concentric fit. So well in fact I suspected it was air compression that made it feel tighter. These were primed with a CPS and all primers were .0055 below flush to start. Sure as shit I started measuring after mandrel and the primers were now .004 - .0045. Luckily I wasn't stroking the press fast and just stayed consistent so all primers were in the range stated above after.

Note to self: Mandrel before priming. Anyone else see this?
A drilled or EDM'd hole through the mandrels plus a hole in the die cap would ensure this couldn't happen.

Arken EP5 5-25x56 MIL NIB unwrapped and handled never mounted. 475 + shipping SOLD
Arken SH4 4-16X50MIL mounted in vortex rings (rings not included) on 6.5 creed 30 rounds fired. Also included Arken bubble level and throw lever. 275 + shipping
Questions or more pictures please message me or text me 757652129SIX

Loaded the last 300 pieces of a 5-gallon bucket of 40cal brass I bought from the PD before I retired 10 years ago. Maybe 20k pieces? Sad part is the dept, like every other switched to 9mm. So no more cheap 40cal brass.

$2700 shipped and insured (Paypal FF / Discreetly- No notes) to FFL in Lower 48 as long as your state and city Will Allow , Please pm me if interested.

Send me an PM if interested. I don't consider items I list sold until I get a firm (its sold or I will take it)
your FFL must accept shipments from individuals.

Comes new in box with the one mag & manual. Not a round through it (except for factory testing) I am migrating away from 308 because of some health problems

I have sold a good bit of my stuff on Snipers Hide and Sig Talk. You should be able to see my feed back on both of these boards. My username is the same on all the boards. Artofthepoint.

I can supply any other pictures and a copy of my drivers License with the serial number for the actual buyer or any other pictures you want.

Thank you for Looking!

About to get one of my long actions back from Hill Country Rifles (they’re very local to me); trued receiver and with a new 280AI barrel. Also had the base/rings mounting holes bumped up to #8-40. Just need a scope mount now….

Probably Medium height and 30mm Ring diameter for a Zeiss scope I already have on hand.

Had my eye on a mount from Night Force, but it appears they’re no longer making them; nothing on their direct mount page: https://www.nightforceusa.com/nightforce-accessories-direct-mounts.aspx

This is the only one I can find so far (at Brownell’s):




…but it’s a high mount. Not a show stopper, but not exactly what I’m looking for either. I also prefer the version with 6 bolts per cap; can’t find that anywhere. Not a big fan of buying used either.

I can obviously just mount a base and then mount a pic rail version, but really wanted to limit the number of interfaces on this build. Anywhere I should be looking? Not 100% committed to that NF, but want a solid, well-made one piece direct mount, and I know of that one.

Thanks in advance…. appreciate any pointers, or hell, just some help getting pointed in the right direction!

Gentlemen please be advised we will be offering a group buy on the Tac Ops Drag Bags soon. When we launch it, we will make a new thread and tell you what sizes and colors are going to be available...

Thank you

Mike R.