These are BROKEN Forge 15x Binos. They fell off a tripod and need a new Prism. They were already evaluated by Bushnell and deemed irreparable. Bushnell instead offered a replacement set for $389.99.

Basically, these are still usable, but you can definitely tell the focus is wonky. They do not resolve targets clearly and your eyes take a minute to adjust to the image.

I have the original packaging, all original accessories including the bridge mount, straps, harnesses, etc. that can be included.

I was incensed with Bushnell’s “warranty” and certainly won’t use them for future optics purchases. However, understanding that they did offer a replacement set at a somewhat discounted rate, and the fact that someone may still able to use this current set, I’m offering these (along with the replacement info/offer) to anyone willing to pay cost of shipping.

TL;DR: these are BROKEN and getting trashed by the end of the week. Pay shipping and they’re your’s.

Spent a short time on my 22. As new still have the box and everything. It'll come with the Seekins Rings and a throw lever. 1100 shipped.

With an Idaho trip a mere 10 months away (counting the days) and me having sold my very nice defiance/proof 300prc hunter months ago like a dummy, I am now in need of another lightweight hunter. I was at first torn between 300wsm and 300wm but I think I've settled on 300wm. The rifle I'd really like to have is a Seekins ph2, but it's a little more than I'd like to spend and finding them in stock in a good color can be a challenge-


A friend of mine is always pushing Tikka, and I know they make great rifles. Would probably be the Tikka t3x lite veil-

https://www.sportsmans.com/shooting...land-bolt-action-rifle-300-win-24in/p/1702049


I also just noticed Howas carbon rifle (carbon stockys stock at least) and it seems like a nice option-


Those are just 3 I'm considering. I'm keeping my eye on buy/sell/trade for something to pop up as well. I'm open to other suggestions as well. Looking for threaded, 300 winmag, ~7lb.

I am looking into purchasing my first scope and after getting behind two scopes (I know one of them as a Leupold), binoculars, and a spotting scope, I noticed some issues when I was shooting several weeks ago...

1. Cheek weld and visual clarity because of my progressive Len with my glasses. I find myself trying to look at the bottom of the lens.
2. Being that it was my first attempt looking through the glass with various devices, the image looked slightly blurry and pixelated?

Any suggestions or advice would be appreciated

j

ALL SOLD

50 -227 grain hammer hunters $55
120 -214 grain hammer hunters $135

$180 for all

Shipping included to lower 48, PP f&f. Thanks.

It may be the congress's job to make laws but its the SC's job to decide them constitutional on no. Where's the problem? The problem seems to be that the liberals dont like what they see and want to be pissy. They are intent on destroying our way of life.

The New York Times on Twitter: "Several new studies argue ...​

https://twitter.com › web › status


1 hour ago — An 'Imperial Supreme Court' Asserts Its Power, Alarming Scholars. Several new studies document the current court's distinctive insistence on ...

Post your own images here!!! Make this go viral!!

Sirhr

Hi everyone thanks for the break.
I know that mostly the consensus is positive for AI rifles, i want to break it down by what is the main why they are. I recon myself that it is the barrel being the object of
scrutiny here, so how many types in manufacturer do they use and what are the thoughts on these.
I shoot a Howa 1500 heavy barrel with GRS stock, slick trigger, compared to buddies with AI's they group better 90% of time , part of it is poss me but id like to kick this
barrel thing about.
Thanks.

Login to view embedded media
This true?

I’m a HK fan, this looks pretty slick.

I’m building AR10. Continuous picattinny rail. Need Mount suggestions for a vortex razor 4.5-27x56.

I’m considering a ZRO Delta or American Defense Mfg. But I’m open to other suggestions. Also presume I’ll need 1.5” high mount for objective clearance.

Thanks!

Good condition with some wear marks. Glass are clean. $1800 shipped. No Trade.

The wife is willing to buy me an action.

I’ve been looking at bighorn, defiance, and impact. But if you could choose any action what would you choose?

I’m leaning towards long action so I can keep my caliber options open. I’m also leaning towards a 7SAUM just because I don’t own a 7mm.

Probably will be used in steel shoots out to 1K maybe some coyote hunting and a nice rig if I ever go hunt out west.

This is a 2019 P with a shit ton of work ton to it.

2019 Staccato P
Monsoon tactical Genghis Komp
Dawson guide rod
Atlas gun works medium trigger set to 3.25lbs
Dawson rmr and delta point plates
3X 21rd mags

Vulcan machine werks
-aluminum grip
-dlc barrel
-dlc guide rod
-trigger work to 3.25
-dlc slide and frame

I shot 100 rds of 124 hst on 12/23/2022. The only reason I'm selling it is a safe queen and I'm wanting a XC or atlas for comps, so that's that only trade besides a nighthawk sandhawk that impossible to find.

Traded

Doesn’t come with the delta point if you want it it’s $300.00 and it’s the NV model.

Pm me with questions.

So i watched the Hornady podcast on their 4 DOF calculator. Based on what they are saying theirs uses significantly more computational power and in theory should be better. If that is the case why does Applied Ballistics seem to dominate it in the market place. To my knowledge Applied Ballistics is integrated with Kestrel, Leica, Sig, Vortex Wilcox, M.A.R.S and probably others. I think Hornady DOF is only is integrated with Kestrel.

With all of the marketing resources/$$ of Hornady why aren't they integrated with more products?

Also which is actually better? On the hide we see crazy extensive optics reviews with every nuance of subjective evaluations of glass ect but to my knowledge i have not seen someone line up AB vs Hornady at 1000 plus yards and see which is more accurate to their weapon system. Even if you don't shoot it i haven't seen much comparison between the outputs of the 2 solvers at ELR distances where differences arise and who's might be better.

It seems to me if Hornady was stastically better we would see guys at nightforce challenge or king of 2 miles seeing it differentiating itself from other solvers.

Thoughts?

Cut for Vudoo or RimX includes Vudoo bottom metal
$1,000.00 shipped

Read this a few days ago. Left with some mixed thoughts. Sad...

Want to sell Face to Face in Temple, TX.
200 rounds (10 boxes of 20 all the same lot.)
$200 for all 10 boxes

The ever expanding NEW 4473

Login to view embedded media

After a lot of research and talking to people, I ordered a lot of reloading equipment. My goal is to gain accuracy with my 308 for competition. I’m just finding it hard to see where I start. There are a ton of opinions on what works and I know I am going to go way down the rabbit hole on what my reloads consist of. If anyone can suggest what my first purchases should be when it comes to case, primer, powder, and bullet? I have a lot of federal Sierra matchking 175 brass. I was thinking Varget or IMR 4064 and 210M? Maybe stick with Sierra bullets because it’s what I know. But I am afraid I am being to nervous to stray from what I know. Any advice would be appreciated!!

Hello, just wandering what level are you guys using.

McMillan A5, short action remington 700 footprint, BDL bottom metal, sendero contour, pillars installed, 3 studs, 3lbs 5oz has a little place at the bolt handle in and had an action put in but never fired or bedded $625 shipped

I have a like new Vortex Gen3 Razor. Has seen one 22nrlX match.

Comes with everything it comes with from the factory. Including the Vortex flip up caps.

Also comes with Vortex bubble level. No mount.

Would like to sell for $2550 shipped or trade for other similar scopes. Cash on my ended if needed.

Looking to trade/sell my Staccato c2. This was a non optic cut model that was DPO cut by David at DSC Gunworks. He also handled the v8 port. Gun shoots incredibly flat for its size. Pistol will come with a delta point pro 2.5 moa (with black multicam ranger wrap), full dpp Dawson mounting kit and rear sight with proper size front iron for cowitness. Low profile mag well included as well. As you can see in the photos the mag well pin is an STI pin that was dremeled to fit, as by the time I noticed I ordered the wrong one they were out of stock. There is also one silver screw in the trigger guard. If this is an issue I will order you a new pin and screw kit once purchased.

The grip was professionally stippled by SRB customs in Ekis texture, full wrap outline, kept logo, recessed border, finger pad not stopped, NO GRIP REDUCTION.

Four mags are included, 3 16s and 1 17.

Also included is a brand new long shadow Huron holster with a safariland QLS, Coyote brown (ejection port covered). I just got this and it hasn’t left my office, just a few dry fire drills.

Upper hand owb ccw holster in spade, few weeks old, hasn’t been carried with

The iwb holster is either a g code or a qvo, I bought it second hand and can’t remember. It looks like a qvo.

Preffered trades: DPO cut staccato P, XL, XC. Huge bonus if it is ice comped. Other 2011s will be considered

Walther pdp full size (pro) with a comp, optic

Walther q5 match

SCARs.

High end optics (hunting/NRL).

NV, thermal setups.

Pretty much everything will be considered, worst I can say is no.

If you have any questions or would like additional photos please let me know

Sale price is 3000, but trade/partial trade would be preferred

Bedded for Impact action. Should fit most clones just fine. Barrel channel is for an MTU profile I believe. I was using an m24 and it fit well. M5 bottom metal inlet.

Rear most threaded hole in forearm is for mounting ARCA. Had an AREA 419 on it. Flush cups on front and back left side of stock.

$690 shipped CONUS

Can add M5 bottom metal for $125 if needed.