Does anyone sort their primers based on Primer Height?

I have sorted my primers based on weight but that was more to identify outliers than actually sorting by weight.

Recently, i have become much more aware of the importance of consistent primer seating and have learned along the way how difficult this can be because the primers themselves often deviate in height up to .003. That deviation will have a major effect on the desired primer seating depth.

Just wondering if anyone else is concerned with or have encountered similar primer related challenges and what they have done to address it.

For sale Gen 1 419 press and accessories $1,200 plus shipping. No dies or die accessories included.

I wish Trump would play hardball with the dipshits in Olympia and their frivolous lawsuits because funding is being cut. He should freeze discretionary federal funds to the state and make the liberal bastards on the westside of the state squeal. The new AG is picking up where the old AG (current Governor) left off.

I need to move.

Lawsuits

... and Spokane city council is considering a bill to restrict ICE agents on public property.

SMDH

They should at least get trespassing charges against them!

Login to view embedded media

Cologne- a bottle of cologne . A bottle of popular cologne called opium .
No testing , no investigation, no fucking brains .

A snap shot of how the road pirates mi d works - it was strange that he was in that part of town, it was odd that he was going to get pizza , the direction he decided to travel was “strange “ and that he’d moved to Arkansas from another state was “suspicious” to them.

It says cologne right on the fucking bottle.
The other two road pirates know that it’s cologne but go along with the kidnapping and false arrest.

These came up on my YT feed. Totally A,I,, but extremely cute and funny. Apparently, a pair of toddlers driving/riding in a car (of all things) are arguing (like adults and in adult voices) about stuff and one or the other just doesn't get the question right, and the two argue about it a bit.. Total fun and cuteness! The author's YT channel Page: https://www.youtube.com/@juns-w777z/shorts



Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media

Login to view embedded media

Say what you will about the man and the channel- I have no problem with him and actually enjoy some his content.
He considered the “grand old man of guttube” by many , has millions of followers and is a pretty smart guy who owned many sig products . He gets it , another nail in in the Sig weapons trafficking, government contracts getting kickback pushing coffin.
Their tone def press releases and lawsuits against private businesses and content creators aside .

Im looking to upgrade from my Vortex Fury to a vectronix or sig kilo gen II.

Does anyone have first hand experience with both? Which would you recommend?

Ive seen very good reviews of both, more on the vector x but my fear is with regards to warranty.

We have some bolt action and sbr semi auto rifles in 300 blk. We are talking 100 yard max mostly unless just hazing pests past that.

We shoot subs and want to get a NV optic or two, and money is tight right now.
They will be used on hogs as well and are considered pests and legally shot or otherwise dispatched at nite. Other chicken stealing and egg sucking pests as well

Any of you use these I found from ads on the hide?

Unity tactical 9” Hot Button for lasers. FDE. New in the box, never opened.

$50 shipped.

I typically use Redding type S bushing dies and Forster micrometer seating dies. When I started I bought all basic RCBS dies and quickly upgraded for calibers in which accuracy was a priority. I’ve never had an issue.
That being said I went to load some 300 black out subs using my RCBS dies. They hadn’t been used in a couple years so I spray them down with CLP inside and out to clean any residual gunk.
The cases were a combination of new Starline, once fire Starline from my gun, and once fired from friends rifles. They were all sized with the same RCBS sizing die. Case mouths were chamfered. Graphite lube was used. 3 of the 10 cases pushed the bullet into the die getting completely stuck. The case came out with a massively oversized neck that then wouldn’t hold a bullet. All cases were the same manufacturer. While I would like to blame the brass I’m not sure how the brass could be responsible. Bullets are 220 grain SMK seconds. I’m considering using this as a reason to finish my collection of Redding and Forster dies. Ideas?

What are your thoughts on the best precision 1pc 34mm scope mount. I have used nothing but the M brace mounts since they came out. I still like them the best for mounting since they dont twist the scope at all. Im considering giving the gray ops or the area 419 mount a try. Whats your opinion? This will be used on a prs gun.

Like new in box Athlon 2-12 FFP MIL. Mounted and never been to the range. Faint ring marks and comes with factory box and all the Athlon accessories.

Asking $375 OBO shipped

Tangent Theta 5-25 Gen3XR Fine
Very Good condition with a little ejection rash on windage turret(pictured). MKM caps, no mount.
$Xxxx shipped conus, insurance on buyer.

This shit has potential to get really entertaining.

Short version is the Tea app is a women’s gossip app. They apparently either have to upload a pic of themselves or of their drivers license. The owners of the app had non existent cybersecurity. So ALL of the data & gossip messages are now out in the open.



And no, it’s not a “ dating safety app” it’s a gossip app.

Good rundown on the implications

Login to view embedded media

I have one of these brand new in the box. Never mounted.
Decided to go a different route.
SOLD

Please message me with questions.

I have never encountered this issue before, in 30+ years of reloading.

I recently purchased 1000 of the .308, 180 grain tipped gamekings.

I went to load some ladders today and discovered that no matter what length I seat them at, they will not chamber in any of my 308s. They also will not chamber in my gauge. Yet, when I pulled the projectile, the brass will chamber cleanly!

I measured the diameter of the projectiles and they are .308 so thats not an issue.

I am using Alpha brass, I tried Fed brass as well.

I tried different levels of crimp as well, that did not help. I also tried partially seating the projectile and then chambering the round to finish seating. No luck. I am completely perplexed.

Thoughts?

My only possible thought is that its the shape of the projectile (see pic)

180 tgk next to 195 tmk (which chambers easily)

After their miserable failure to take over the world of breakdancing... Australia's first attempt to launch a rocket has worked out just as well.

Well obviously! They had it pointing the wrong way! Heck of a Barbie, though!

Login to view embedded media
Well, they'll be back.

Oh and, that's not a rocket... THIS is a rocket!

Login to view embedded media
G'Day!

Sirhr

Have the libs pissed off mother nature to the point, she may take action?

I was just in a store today and looked at the price of match primers.
BR-2 and BR-4 for $16.99/100
GM205M and GM210M for $11.99/100

In Canada prices went from $16.99/100 to $25.99/100 for the BR-2 and BR-4.
Last I looked they were $15.99/100.

What changed in the last few months?

Just heard that drunken Kamala won't be running for governor of my state in 2026.

FTFA"

Cincinnati police chief says out of 100 people watching and recording violent attack, only 1 called 911​

Well at least they stopped to video:

Video is in the link, I can't find a version without the talking heads "Explaining" everything to us.

What got me was Everyone filmed it, no one called 911 or tried to stop.

I know the pit is divided on "Would you intervene or walk away" I get both--but to stop and film? Yeah DOOOOOOOMED we are.

Login to view embedded media
Colorado State Patrol accused of detaining motorists indiscriminately to support corrupt revenue scheme.

Not really, just kidding.

Holy shit - if this turns out to be random I’d be surprised.
Gotta have a lot of hate to make someone a human torch in front of witnesses