Gone

Razor Gen II 4.5-27 MIL with EBR7C. Very good to excellent condition. Have the box. Sitting in ARC rings. Mainly been a safe queen.

$1650 shipped with the rings OBO.

Selling my Silencerco Radius. Very light use, no scratches/damage. 100% functional. Has remote switch. No box. $1100 shipped

The SCOTUS will soon be deciding very soon about eliminating the Chevron provision for the alphabet agencies that will significantly limit their current ability to interpret laws as they see fit. Big effect on ATF, EPA, etc.
Login to view embedded media

XLR Envy Pro- R700 SA
-external and internal weights
- Stock Weights and bag rider
-folding stock adapter, mercury buffer tube
-thumb rest and MDT grip
-NV bridge-full length
-Extended Spiggot Mount
$950

Somebody needs a fresh diaper and a nap.

Login to view embedded media
What a fitting time to yell 'You suck, Joe.'

I have another slew of stuff. As always prices are shipped lower 48.

PPFF or money order. No trades at this time please.

Here's the part I hate but anyone that's been on here long enough knows why I do this. The first "I'll take xxxx" posted here gets it. PMs don't count however please feel free to PM me with questions.

- Fluxeon Annie Annealer -SOLD 300PRC- Best annealer in my opinion, Way, way faster than the AMP and once you know how to use it it's VERY repeatable. I might have to ship it without the board its mounted on due to size. Includes the water cooling setup all from Fluxeon.

- Leupold CF-436 Carbon tripod $300 (unused)***SOLD***Tbone

- Pig Saddle with ball head and tripod Like new - $300****SOLD****dlouie

- Leupold SX-2 Alpine HD Spotting scope, like new -***SOLD*** Schmo

- 21 Century Turing Lathe - includes .33, .30, 6.5 and 6mm expander and turning pilots, expander die and two carbide cutters for most common chamberings. - SOLD Vitali

- RCBS Chargemaster - great condition works great - $150***SOLD***gotbull

- Magnetospeed Sporter with XFR box - $125***SOLD***gotbull

- 50 new (51 actually) Lapua 6mm CRD cases SOLD Vitali- I'm not going to ship it with the factory box unless you need to to help save on shipping.

- Glock 43 threaded barrel, Silencerco, very few rounds - $75

- Kelbly Claw 6mm. Only a few rounds through it. You almost can't even tell - $75***SOLD***cajun

- Ken Farrell 30mm standard height steel rings - $75***SOLD***jklee

- Ken Farrell 34mm low height steel rings - $75

- Ken Farrell 34mm standard height aluminum rings - $75***SOLD***dlouie

- Brownells 700 action wrench, three piece - $75

- Viper Barrel Vice - SOLD afd77

- Sig Cross 16" 308 barrel with barrel nut and thread protector 250 rounds- $100***SPF*** car16smg

Picked this up from the prize table and I’m trying to talk myself out of using it. It’s $400 off a action from zermatt arms. I’ll sell for $sold

Got lucky and it’s time to order another thunderbeast. I currently have an ultra 7, and in jail I have a magnus CB.

I just shot my first match suppressed with the ultra 7 and am giving up on brakes. Sick of the noise and concussion. Have a few questions on options specifically looking for input from competition shooters.

-CB or SR? Iv been passing around the ultra 7 quite a bit, I havnt had any problems with the CB but do tighten it regularly if needed, when it gets hot and cools quick. I also notice on higher round counts I really fill up the threads with carbon, just more cleaning but the SR mount has some appeal in that regard. Is the SR mount worth not having to worry about your can loosening during day a prs match?

-I’m currently thinking of getting another ultra 7, with a 6.5 baffle stack or going with a magnus SR to dedicate to my heavier competition guns that see more round count.

Passing around the ultra 7 is getting old, especially swapping rifles that have significantly different muzzle pressure. Every time I shoot it on my shorties it seems to make a lot of big carbon chunks, that sometimes end up in the chamber. I’ll have some redundancy with the magnus cb and ultra 7 if something were to happen, but having another ultra 7 to pass around the hunting guns it rides on would also be nice.

-Recoil on a heavy comp rifle. Do you notice a difference between the magnus and ultra 7 on a heavy comp gun, mostly 6 and 6.5mm flavor? Is the impulse different enough to warrant the price for another magnus?

Thanks.

Top down

LWRC REPR MK1 (250) ROUND COUNT $2150
LMT 6.5CM Never fired "sold"
SCAR 20 NRCH 6.5 (400) round count $3550
Mk13 mod 5 Built by Allen brown with a Correct NXS SCOPE "sold"
FNH Tano build. FNH upper and lower Colt BCG. Noveske Afghan barrel 14.5 P/W With a 4 prong $1600
Noveske .300blk $2250
APC 300. $2250 Without Eotech



641-895-9130 for more pics and to communicate

I’ve got an NBK on the way for a hunting build. Need a stock for it. Ideally something along the lines of a Manners EH1 or McM Game Hunter. Likely using Hawkins Hunter M5 DBM.

I don’t mind having to bed the recoil lug, skim the inletting and maybe make some minor adjustments like sanding the barrel channel to make it fit just right, but don’t want to have to get crazy with a Dremel. I don’t have access to an end mill. The depth of the inletting top and bottom needs to be correct out of the box.

I see some companies make stocks inlet for Impact actions. I imagine these will drop right in. Then, of course most everybody makes a stock for a Rem clone. If I go with one of these, how much fitting work can I expect? Does the trigger hanger pose a problem or make a need for more adjustment to inletting? I’m trying to put this thing together without having to wait 6 months for a built to order stock. Anyone have good luck with a particular stock and an Impact action?

Login to view embedded media
Glad I'm not going to Houston this week. I'm about an hour south and the wind is in my favor so I should be good.

I used to be able to use the tools to color text, underline, strike through, Italicize, etc.

Now, when I copy to paste with one of those choices it just creates a little box with the copied text but no colors, or underline, etc.

Anybody else found that or is just my computer? Did I somehow disable that section?

I asked @AlexJ but never got a reply.

Pick about any well know company.

Top investors are :

Blackrock
Vanguard
State street.

Declare these giants monopolies and break them up.

That’s my .02. For the day.

That stupid policy (not a law fer fuck’s sake) that stands common sense, and literally thousands of years of financial policy on its head re: punishing people who do the right thing with their finances, pay their debts, and save up for a down payment went into effect today.

And then to add insult to injury, Uncle Sugar takes that money and gives it to people with bad credit, so they can borrow even more money…because that’s worked out so well in the past.



Looks like some states are finally pushing back: https://www.foxbusiness.com/politic...od-credit-borrowers-subsidize-risky-mortgages

But how is this even remotely legal/constitutional? And why aren’t State governments coming right out and telling them to fuck off?

I honestly feel like I’m living in Bizzaro world sometimes…

Used Impact 737 Action. This is right hand short action with standard BF. Comes with a Bix N Andy tac sport pro trigger with the wide trigger shoe. Probably have the thin one laying around too I’ll send.

Not sure how many rounds are on the action if I had to guess maybe 4000.


$1300 shipped for action and trigger

First off yes it is hairy, having a hairy dog this is just an issue. This animal turns food into two things, fur and huge piles of poo.

I wore this shirt last week, and I went to Wendys for some lunch.



While there I noticed about 40 kids there, usually I would 180 but they are already eating so I got right up to the register to order.

I think it was a debate team, did not look like the normal FFA kids. And as I got my napkins and stuff I could see them looking at me with interest.

I sit down and I half screw around on my phone while keeping an eye on the kids, looking and talking between themselves. Their phones come out, and I can see them mouthing Who's John Gault. Me I am just sitting there with a giggle on the inside.

Finally one of the teachers comes over after I am finished and putting stuff away and asks where did you get the T-shirt. I told them my wife made it for me. He says it got the kids really talking. Smiled and left.

It was a fun time. Wore it up to town Saturday and the people looking at me with a "who is that" look was just fun.

Looking to buy a new one, is there a best place to buy them, or is it a level field on pricing? Looks like MH and Euro have some in stock. Wanting a 20” or 22” barreled action, going with an AI or Cadex chassis.
Tried finding used, but haven’t had much luck.
Thanks

Size 36 long. I’ve got two pairs. These are the newest version. Neither have been worn/washed and are brand new. One is still in the packaging. I’ve also got a medium regular top that has been washed. It runs large. Selling because I bought 34s that fit better.

Pants are $200/pair and top is $150. Willing to sell a pair of pants and top for $300.

Summer is almost here, and I’m soliciting ideas on a hat to shoot in. I’m bald as an egg and shave what little genetics has left me. I’m also on an immunosuppressant that makes me sensitive to direct sunlight. I’ve got the sun shirt thing taken care of but a ball cap isn’t cutting it.

So, what have the more experienced folks used that gives good coverage but doesn’t impart target visuals?

The barreled action is unfired.

Upgraded the Manners to include the Manners matching cheek riser and an Area 419 MCS full length weighted arca rail.

Includes the Area 419 30 MOA scope rail. Rifle weighs 7.5lbs as it sits.

$1850K shipped from my FFL to yours.

I've had a PRS rig in mind for over a year while I save up(work wasnt going well in 2022). I have bounced around cartridge selection for majority of that time.

Initially I was leaning 6XC until I realized the different chambers, how different brass is optimized for certain chambers and you didnt always know which sizing die was for what chamber dimensions

After that I looked into the 6 GT. It was the hot new thing at the time. I was on the FB group for about a year or more now too. But it seemed like it was a solution for a problem that wasn't asked. It was in between a dasher and a 6x47 lapua but imo didn't offer any benefits over either. Not just that but you're stuck with either hornady brass which im not a fan of, or alpha brass which isnt always available.

Then I looked into 6mm creed because there's still SRP lapua brass floating around, peterson and alpha make brass, everyone makes brass. I don't need factory ammo unless SHTF but that's another story. Downside is i saw ES/SD go up with reduced charges to get slower voleocities to improve barrel life and be able to spot trace/misses easier and if you went near max charge, barrel life goes way down.

Finally I considered 6x47 lapua after talking to a few local shooters. I heard in the past that it was finnicky to load for but a few smiths told me it was likely to improper chamber dimensions from improper reamer design when compared to the 6.5x47. I know you can still get 6.5x47 lapua brass from various manufacturers like lapua, peterson, and alpha, but peterson also makes dedicated 6x47 brass which im a fan of.

I know many will say go dasher, but i would rather not have to fire or hydroform brass. i know alpha has dasher brass but like i said above, it's not always in stock. Just wanted other perspectives on cartridge selection.

Some time back I mentioned that after trying all these new fangled barrel cleaning products I concluded they didn't work very well at all. You can go back and look at that post but I'm having a hell of a time finding it myself. I'll keep looking for it and post it here when I find it.

So, I went back to the old stuff, and my old process. Guess what? That old stuff works, and a lot better than the new stuff based on my borescope.

I went back to brass brushes, and Hoppe's #9. That's right. They starting making that stuff in 1903, I think...

Now I have a picture to show you. Last time I went to the range I shot 60 rounds of 6mm centerfire. I had run out of the Hoppe's #9 so I ordered some and had to wait 6-days to get it. So the gun sat dirty for a week.

I do have the luxury of having a vise with silicone barrel jaws so I can leave the rifle in there as long as I want. That said, the process only takes an overnight - 12 hours. The image below is ALL the patches I used. I capture them just by pulling back on the rod and they fall on one of them plastic drawer things that I also use for storage.

The cleaning regimen:

1) Run a couple of patches to remove all the loose carbon stuff.
2) Next I run a #9 soaked bronze benchrest brush - 15 strokes (30 passes through the barrel) have a drink while that sits for an hour. Then, run patches soaked in #9 until reasonably clean.
3) Repeat #2.
4) Let that soak overnight.
5) Next morning I run #2 again.
6) An hour later I do #2 again until wet clean. By this time, all the stuff on the patches is all copper (blue/green).
7) Then I run dry patches until they come out dry.

Done.

When you look at the image all the carbon gets taken out first (it's all below the rest of the patches). Then the last wet patches are all copper and finally the dry patches on top perfectly clean.

No more different chemicals, No more expensive cleaning crap that doesn't work. The old stuff still works the best. It's cheaper and it's only one bottle.

Up for sale is my precision rifle. Has about 150-200 rounds through the barrel
Proof research 6.5 creedmoor barrel
Bighorn origin action
Krg X-ray chassis
Accuracy international 5 rd mag
Atlas bipod with adm mount
Area 419 hellfire brake
Arken epl4 6-24 MOA scope
Triggertech trigger
Asking $3000 cash
Trade $3200
Trades I’d be interested in are H&K sp5. Spear LT staccato c2 or cs
Will separate action and barrel for fair offer