Video shows brazen thief rob off duty NYPD officer of his gun, badge, ID, wallet

Can you help Identify what Bipod this is? and what side picante rail this is on the AT Rifle. This is a current picture off the AI web site. Any help Appreciated. Also where can you buy?

Kid looks like a total worm to boot.

Purchased this Nighthawk earlier this year, haven’t had a chance to even get it to the range. Pistol is unfired other than test target before leaving Nighthawk. Includes everything as you would get straight from Nighthawk, pistol, (2) mags, green pistol case, test target etc…These retail for $4k.

Asking $3500 shipped.

Check this out... not at all gun related but I figured some of you would find it interesting.

Login to view embedded media

This is actually 2 questions. I went down to my basement where all my reloading equipment was last week, and my dies and other metal tools had rust on them. I went and got a humidity moniter and the humidity ranges from almost 70 to 50 percent over the past week.

Question one
My primers are just in the brick that they came in and my powder is sealed tight in the containers. Are they still good? I planned on loading over 1000 rounds this weekend for shtf ammo.

Question 2 any suggestions on how to remove the rust from the dies?

I purchased a dehumidifier. Humidity is at about 30 percent right now, and in the winter I can't imagine it getting above 20 with my wood stove running 24/7.

Thanks fellas!

I've decided it is time to clean up some items I'm not using anytime soon that someone else could benefit from I'm sure. Payment accepted via Zelle or PayPal (fees on buyer). Shipping will be via UPS or USPS unless otherwise arranged -- CONUS only. Willing to combine items and give discount or make reasonable deals where possible. PM all offers please.

Berger:
Qty 549 -- 230 Hybird OTM .308... dropped one somewhere lol. 500 same lot. Will not separate. $400
Qty 500 -- 109 Hybrid Target $280

Hornady:
Qty 473 -- 250 A-Tip .308 same lot $320
Qty 200 -- 225 ELDM .308 same lot $90
Qty 100 -- 212 ELDX .308 $45

Triggertech:
Primary single stage w/safety and no bolt release -- box says diamond but it's a liar. $100

Primers:
You gotta come pick them up in Jacksonville, FL or arrange FTF transaction. I travel from Jax to Orlando a couple times a month and am willing to meet up along that route if it helps. NO SHIPPING.
Qty 1000 -- Federal 215. $125
Qty 1000 -- Federal 100. $70
Qty 1000 -- Federal GM155M $80
Qty 2000 -- CCI BR4 $260

Frankford Arsenal:
Universal bullet seating die -- brand new in the box. Got it as a gift but have micrometer dies for all my gear already. $45

SOLD:
Qty 40 -- 6.5 PRC Hornady 143gr ELDX Precision Hunter $105 SOLD
Qty 62 -- 300 PRC Hornady 212gr ELDX Precision Hunter -- 18 additional 1x fired brass included. Will not separate. $150 SOLD
Qty 400 -- 153 A-Tip 6.5mm same lot $250 SOLD
Qty 500 -- 156 EOL Hunter 6.5mm same lot $340 SOLD
Qty 500 -- 140 Elite Hunter 6.5mm same lot $320 SOLD
Qty 200 -- 230 Hybrid Target .308 same lot $160 SOLD

Selling my Mk12 Mod 1 Clone upper. This upper has exactly 40 rounds fired through it and is in excellent condition.

Build list is as follows:
- BCM upper
- White Oak SPR 18” 1 in 7 twist stainless steel barrel
- KAC FF RAS rifle length
- AE Collar and brake
- Badger MK12 gas block
- KAC Irons (Front and Rear)
- PRI M84 Gas Buster charging handle
- Toolcraft BCG
- KAC rail panels and broomstick

WILL NOT SEPARATE ANYTHING

SOLD SOLD SOLD

Paypall FF or Zelle for payment. Listing is cross-posted and goes to first "I'll take it".

I have a v4 Autotrickler I’m putting up for sale of the price is right. I have been on a waiting list for another one that should be shipping any day now and won’t need this one. So I figure I can help someone out that is looking for one instead of canceling my order on the new one. This Autotrickler has had no more then 2lbs of powder through it. It’s basically brand new. Id need to get $450 out of it to consider letting it go plus $10 shipping to lower 48.

Selling a used but not abused MPA Matrix. Remington 700 SA Footprint
Raw aluminum, with rear buttstock weight.
Night vision bridge.
You will need to get the recoil lug and level from mpa.

Looking to get $900 shipped

So. . . .
I purchased a group of Surgeon M1086 actions last year when Preston was getting everything whipped into shape in Phoenix. My curiosity was piqued as to whether they were as good as the ones I had gotten years earlier when they were in Prague, OK. I was impressed with these and have been attempting to get them built into complete rifles between the regular workload.

I split the group between .300 Win Mag and .300 PRC and included the usual features I have been running on my standard LongSwords since 2014.

Because I'm not real smart and I can't build enough of the usual Mk2 LongSwords, these will be the last and only ones I am going to build on the Surgeons.

It was a neat, almost nostalgic project and I thought they came out nice.

Sold




Area 419 Turret Zero Reloading Press

Outstanding press! The tightest smoothest press I have ever owned, but my taxes are coming up and it has to got for now. I like it so much I WILL be buying another next year.

Will come with everything in the box (torque tool/bolts/manual/, and will be shipped in it's own padded box.(see pics)

$975 shipped.

Paypal friends/family/ no checks.

https://www.unionleader.com/news/co...cle_18479394-9e66-5d0c-8a59-a409c446933f.html

The p320 is one of my favorite guns, but if Sig loses this(and considering the jury is more than likely not very gun knowledgeable it’s a definite possibility).the lawsuit floodgates will go wide open.

Why all of the sudden is the element Nitrogen now considered a pollutant? It's the 7th most common element in our universe, is necessary in plant life, and is a key component in amino acids.

First it was CO2, another necessary chemical compound for plants and photosynthesis, is naturally occurring and has been since earth became a planet. Even carbon, the basis for all life on this planet, is considered a pollutant.

I'm no scientist, I'm also not a chemist, but early on in grade school science we were taught that CO2 and nitrogen are important for plant life and the overall health of the eco system. Now it seems like none of that is taught and these modern so-called "scientists" know more than some of the greatest minds to ever walk the earth.

Can someone help me understand scientifically why they are now bad?

The House passed their version of the "Assault Weapons Ban." It passed 217 - 213.

Do you think the Senate will do the same? And how can we prepare for that?

So Im thinking of upgrading to a Zermatt Arms TL3. I just wanted your guys' opinions as to what your thoughts are on them. Where do you guys get your barrels? Are you guys that have them happy with the setup and the barrel changes? I have shot nothing but Remington 700 and Savage for 12 years and from what Im seeing I could upgrade actions and basically change barrels myself for about what it would cost for me to buy a blank and have my GS chamber and install a new barrel.
Anything Im missing? Anything to pay attention to and be aware of? Those actions are a chunk of change and I would like to hear what you guys think.
Thank you all in advance.
Steve

Shipping is actual cost if buying one item.

https://slrrifleworks.com/sentry-8-clamp-on-adjustable-gas-block/ :: 85 obo 55 obo sold




https://arisakadefense.com/offset-optic-mount-combo/ :: 75 obo sold




https://www.brownells.com/rifle-par...h-steel-black-sku100024576-104804-201897.aspx
https://www.forwardcontrolsdesign.com/ABCR-v3-Augmented-Bolt-Catch-Release_p_237.html :: 40 for both obo sold




https://www.battlearmsdevelopment.com/ 2x ambi selectors :: 60 for both obo sold
https://lmtdefense.com/product/semi-auto-selector/ :: 35 (has lmt boss)





all kinds of grips (bcm vfg is mlok) (rails are p&s marked)
145 135 for the lot obo (250 retail for everything)

Wanting a new annealer and can’t bring myself to spend the $ on an AMp and have read some iffy stories on Annie and it taking 4-6 months to get them...

So I’m giving into the idea of going back to a flame annealer. Is the benchmark the better of the choice in that field or should I just order the Annie for about the same money?

Selling a Like New Two Vets Q.D.T (I believe its a V2) with ARTCISE LB52 Tripod Head

Tripod has some decals which I can remove prior to shipping

Asking $600 Shipped for everything

I searched for a similar thread but didn't see one posted, so apologies if this is a double-tap.

I'm still AD, so my commentary won't be as in-depth as a private conversation, but 3 years ago I came back stateside after serving in Japan for 4 years. While over there, this was definitely a fear of mine...some traffic accident or accidental situation being my fault (or my family's) and finding one of us staring at a prison sentence in a Japanese jail.

SOFA protections only go so far and if you're especially heinous and commit murder/rape/etc. against a Japanese national, you're almost guaranteed to receive a Japanese prison sentence. I can kind of understand it in that case. Kind of. In this officer's case though, it's making me question a whole bunch of things that I shouldn't be questioning...

NY Post Article

Lying in bed turning channels last night and came across the movie "Swordfish". Don't remember the channel but started watching it when this scene came up.
Of course it was an edited version (Heck for F**k, etc.), but I didn't expect to see this.

You can see the suppressor clearly in the second pic,.

What, they didn't want to scare us? Bogus.

Since when did they start this crap??

Anyone tried Frontier brand ammo?

Maybe Hornady bullets loaded at the Lake City plant? I read that somewhere, but don't remember a reference.

Thinking of trying the 68BTHP "match" in .223

Thoughts?