In the depths of the discussion board here I ran across a post where someone suggested an alternative (cost) product to the Geissele reaction rod and for the life of me I can't find my way back to the post. Sound familiar? Brownells has a barrel extension rod but no flat on the other end.

Pistol Related Stuff:
Win. Autocomp- 3/4lb $22total
CFE Pistol- 4.5lbs+($30/lb) $135total
Acc. No.9- 1.5lbs+($25/lb) $38total
Acc. No.7- 1/4lb $5total
Win. 572- 3/4lb $20total
Aliant Blue Dot- 3/4lb $20total
Accurate 1680- 1.75lbs($30) $50total
Lil' Gun- 2.75lbs($29/lb) $80total
Ramshot Enforcer- 1/2lb $10total

CCI No.300 LPP (for use with RCBS APS Priming System, though they are easily removed from the strips if undesirable)- 1k $55total

Rifle Related Stuff:
Superformance- 5lbs($35/lb)$175total
IMR4064- 5lbs($35/lb) $175total
BL-C2 - 3lbs($35/lb) $105total
H4198- 2lbs($40/lb) $80total
H4895- 2lbs($40/lb) $80total
IMR4831- 3.5lbs+($35/lb) $120total
H4831- 2.25lbs+($35/lb) $75total
*SOLD CFE223- 5.5lbs+($30/lb) $165
H380- 1lb $30total

*SOLD CCI No.200 LRP in APS strips, 1k $55

-243Win brass, 350peices+/-, fired ONCE $60total
-450 Bushmaster brass, 100peices+/-, fired ONCE $15total
-30-06 Springfield NEW FACTORY PRIMED brass, 400+ pieces $200

Bullets:
-SNS 40cal 175gr SWC, 500count $55
-Hornady 30cal 168gr BTHP, 300count $125
-Sierra Matchking 30cal 168gr BTHP, 500 count $240
-Hornady 30cal 212gr ELD-X , 100count $35
-Hornady Interlock 30cal 180gr SP, 100count $34
-Hornady Interlock 30cal 180gr BTSP, 200count, ($34/100count) $68total
-Hornady SST 30cal 150gr, 200count ($35/100count) $70total
-Hornady SST 30cal 125gr, 100count $35
-Hornady Interlock RN 30cal 150gr, 100count $35
-Hornady 30cal 150gr FMJBT l, 100count $23
-Speer Hot-Cor 30cal 150gr, 200count ($32/100count) $64total
-Speer Boat-Tail 30cal 150gr, 100count $32
-Hornady 22cal 68gr BTHP, 100count $25

Ammunition:
-Federal Non-Typical SP 30-06 180gr, 6 boxes ($25/box) $150total
-Federal Non-Typical SP 30-06 150gr, $25
-Remington Core-Lokt SP 30-06 150gr, 6 boxes ($25/box) $150total
-Remington Core-Lokt SP 30-06 165gr, $25
-Remington Core-Lokt SP 30-06 180gr, 3 boxes ($25/box) $75total
-Federal Non-Typical SP 243Win 100gr, 5 boxes ($25/box) $125total

Dies/Press/Miscellaneous:
-Lee 450 Bushmaster die set $35
-Lee 243Win die set $35
-Lee 30-06 die set $45
-Lee 308Win die set $35
-Lee Collet Neck die 243Win $10
-Lee Trim die 30-06 $10
-Lee Trim die 243Win $10
-Lee Trim die 308Win $10
-Lee Classic turret press/accessories/4+ turret plates $225

Myself and brother planned on using all of this stuff but have either changed cartridges or upgraded existing equipment.
Northern Indiana
My cell number is (219) 851-9187

I’m looking to order a weapon light from Russia, is this a issue with bidens proxy war BS going on right now?

Any experience with shipping?


Thanks

I might think about stashing one and reporting the rest, but then again I’d also be thinking it might be a trap.

Any HAMs or techies that know this stuff let me know if what I have in mind exists...was wondering if a hand held is made that can send/receive local short band (CB/EMT/Fire/Police, ETC) as well as receive AM and FM?

Autotrickler V4 - Sold
FX120i Scale - Sold
Radio Dust Covers ATV4 Dust Cover - Sold

Looks like someone finally went and did it?:

We got a live one complete with multiple degrees, security clearance, and reading comprehension.

Brand new in box Impact 737 action with .308 bolt face, Right Hand. AICS cut. $1275 shipped

I have 5 bricks (1/2 case) of Center X minus 2 boxes for testing. 48 boxes of 50
All matching lot number.
This shot great out of my gun but I am staying with Eley

$750 plus actual shipping cost. Posted locally won’t last long..

Hey Gents,
Looking for an entry level rifle for a buddy of mine to get started with. .308 Win is the preferred caliber and mainly looking for an RPR (Gen 1 is fine) or something similar. Let me know what you might be willing to part with.

Thanks,
CM

1977 Browning BAR chambered in 7mm Remington Mag. with Leupold VX-3 4.5-14x40mm $1,050

I will add cash toward a ZCO 5-27

I’m looking at buying a new set of 6 dasher dies. I can’t help but notice all of SAC dies for sale in the classifieds. I was considering SAC dies why are so many for sale and what is everyone going to?

Complete rifle for sale:
Specs:
-27” proof barrel chambered in 223 AI by Apex Gunworks out of Rawlins Wy. It’s a 1:7 twist with 0.110” freebore for shooting heavy 223 bullets. Barrel has 800 rnds through it.
-bergara premier action (comes with .308 bolt face as well)
-trigger tech primary trigger
-bergara branded XLR chassis
-homemade aluminum ARCA rail and weights.
-rifle weighs #16 with weights

Asking SOLD shipped to your FFL

Also have a set of Redding Type S dies that could go with it for additional cost.

Selling this cause I use a pack with a scabbard more these days. In great shape in the dry earth color that’s current out of stock on eberlestockds website. Some scuffs on the hard shell and some random spots on one of the side pockets. Asking $220 shipped to you

Two trimmers for sale.

Trimmer #1 $400 shipped: excellent shape. Bare trimmer (no holders/head/blades)
Login to view embedded media
Trimmer #2 $350 shipped: frame was damaged in shipping, but motor, belt, and cutting assembly were unaffected and work 100%. Right now it doesn't sit perfectly level but you can shim the rubber feet with washers. The bent part of the frame is on the top left in the pic (where white screw cap is) so even though it's not level the trimmer doesn't rock when you push the casing down to trim.
Login to view embedded media
Case holders, cutter head, and cutter blades (only for purchase with a trimmer)
308 case holder, cutter head, cutter blade. $60 (two available)
6.5x47 case holder, cutter head, cutter blade. $50
6 Dasher case holder $30

Good evening everyone,
I'm looking to sell ammo on the BUY/SELL thread. But I don't have permission. I have donated $10 this month toward the site, but I still see that I cannot post in there.

What does it take in order to post in the BUY/SELL section of SniperHide?
V/R
John Jameson

A friend of mine showed this to me about 6 months ago. I got pixie dust all over me and asked him if he ever decided to sell it to call me first.

It was his dad's 1000 yd gun from yesteryear.



1957 born date Model 70 Target medium heavy barrel. 8 power Unertl (with caps!). Extremely clean with correct butt plate. 30-06 SPFLD.

I was thinking someone could appreciate it here.





BugIn

If they were white conservatives they'd be called militias, racists and domestic terrorists.

They want reparations, the border closed and illegals sent home. But they said don't think for a second this means they are aligning with Republicans. Their demands were directed at Ted Cruz and Gov. Abbot.



White Supremacists at it again.

So is this unsat, or is it ok?

I’m going to have to 3D print a new plastic pic rail “key” so it will lock in the forward/back slot, but as far as gripping the actual rail is this ok, or not enough rail for this light?

Seems like a lot of reaching to find positive reasons.

3 independent yet mutually supporting fire teams seem to bring more Fire Power than two 6 man teams likely to suffer from too many chiefs……

For sale
Consolidating stocks and moving on from this last Manners PRS-TCS in the collection Excellent condition and ready for competition with 5 brass weights in arca rail, Sikes clutch kit, and Mini-Chassis for R700 RH actions.

Avoid the +10 month wait right here and save a bit of $$$

Specs

• Color - High Plains
• Finish - Matte
• Inlet - R700 Right-Hand Short Action
• Bottom Metal - Manners Mini Chassis
• Area 419 TCS Arca Rail
• 1 Butt Stock Weight

Extras Included

• 5 Brass Weights
• Full Sikes Clutch Kit (Rail + 1 Knob)
• Wiebad Mini Pad
• Quick Adjust Knob on cheek rest
• **NOTE: TWO ROUND QUIVER NOT INCLUDED**

Asking $1525 Shipped; Prefer PayPal F&F, Zellee, or Venmo. Face to Face in Northern Califormia may be possible.

Guys, kinda new to annealing here. I’ve been using the ole cordless drill and deep socket and a flame for 6.5 and 6.5 cm I’ve been keeping them under the flame till a full orange is visible which is usually between 10-14 seconds, but also notice the orange flame come off the neck on some of them. Is there an easy way to test to see if I’ve over annealed? Thanks. Also I’ve played around with quenching- not recommended I know so I quit doing it but is there any special attention I need to keep with those?