Filter

Wanting a loosely built M24 clone. Help me get going if you can...

I've always admired the M24 and I want to build a loosely built clone of one. I don't care too much about clone correction but I'd like it to be somewhat close.

I was thinking the first start of the build...Should it be a Remington long action receiver and bolt? I don't exactly know how a long action vs short action works but I do know it will be a 308.

What dictates which magazine has to be used? I want this to have a flush magazine and not one that extends past the stock.

Accessories WTS- A Few Things That Need a New Home

I have a few more things that are sitting around and need anew home.

Prices are shipped and PayPal F&F is preferred but MO is OK too.

Scope Chap
Like new. Came off of a S&B 5-25 PM II but most likely fits similar size scopes like Tangents or Kahles. Looks like Multicam black. Asking $45 SPF
Scope Chap.jpg


B5 Bravo Stocks
Like new condition. Just looking to sell one really. If one sells, I will just keep the other as a spare. Asking $45
B5.jpg


ADM Mount
ADM magnifier swing mount model AD-SM-02-STD. Used with some light wear marks. Asking $65 OBO
ADM 2.jpg


Accurate Mag
300 WSM/6.5 PRC. Brand new, never seen a magwell. The only reason it is out of the wrap is because I thought it was a 308 mag. Asking $55 SOLD
Mag.jpg


Mag 2.jpg


Spotting Scope Cover
For a Bushnell T-Series spotter but It should work on a Leupold Mark 4 spotter as well. Brand new, never used. Asking $20 SOLD
Scope Cover.jpg


Throw Levers
MKM throw levers. 2 for S&B PM II's and one for Tangent Theta. Asking $20 for both S&B's and $15 for the Tangent OBO
Throw Lever.jpg


There they are, if you have any questions, shoot me a PM anytime.

CM

First transgender Army Officer arrested....



Interesting.....

Branden

Why not, enemy pre war broadcast?

Just wondering,

When it comes to shitholes we always invade (and yeah I know its just about special interested these days), why not broadcast

We have to have the tech to take over their broadcasts a few times


“Good people of fuckstain, your country poses a clear threat to America, we will be launching attacks on your country, we estimate a large amount of civilian collateral damage, and devastation to your economy and infrastructure, our issue is not with you, it is with your leadership, if you are able to overthrow President FuckWit, Gen TwatWaffle and Comrade CumStain, we will not attack if they are overthrown by Thursday, and we will pay 3 million USD to each person directly involved with their video recorded deaths, as well as full asylum in any country the US pays for the defense of”

🤷‍♂️

Dumb people...

Some lady was walking her little rat “dog” down the road and two large dogs ran out sniffing, I think the rat dog nipped at the large dogs so they started nipping back and barking, chasing the little dog. Little shit is on a leash so a smart person would yank the leash up picking the dog up or grab it and pick it up, or kick the large dogs....not this lady she just starts doing a “peepee” dance looking jig and screaming bloody murder incoherently spinning in circles. Large dogs never even looked at her they were focused on the little rat.

Long story short the large dogs stop and run 10-15yds away but are still pacing and barking, her dumbass just stands there she doesn’t try to leave, just stands there like a moron playing with her phone probably posting on Facebook....zero survival instinct. Little rat dog looked alright it was just standing there like nothing happened.

Help me fix my screw up ( resized brass)

FYI I’m not new to reloading, but most has been straight wall.
I resized about 60-70 Lapua 6.5 cases and I bumped the shoulder back about .006 vs the .001 I should have done. I basically followed the instructions on screw down the die give it a twist etc etc. ( I have bought headspace gauges now) While I’m sure I can load and fire it’s a waste of bullets and barrel life.

My question is would priming them and “fire forming with no bullet be a option. I have never fire formed so so I’ll be reading up on it later but I saw someone did cream of wheat and crisco with unique.
I’m obviously not trying to do some sort of wildcat we’re only talking about a couple thousands of a in.

Anyway I’m open to advice whether it’s trying to fix them just shoot them or write it off as a lesson learned

Reloading Equipment 300 Norma brass & Berger hybrids

204 x 2x fired 338 norma (headstamp) sized to 300 norma. Norma brass. some de-primed some have primers. Fired from a Stuteville precision barrel.

51x 2x fired 300 norma brass. Same condition same barrel as above.
Selling combined -all 255 pieces for $200 shipped.

ALL GONE- PLETHORA of Berger hybrids: all gone

SOLD
3400 of 6mm 105 hybrids.
Will sell in lots of 1k or 1400. 450$ per 1k shipped. Unopened.

SOLD 2k of 6.5mm 140 hybrids. 2 separate lots of 1k. Will split sell the separate lots. 550 shipped per 1k.

Attachments

  • 520E9359-EE7B-408B-A677-BD369EC67B54.jpeg
    520E9359-EE7B-408B-A677-BD369EC67B54.jpeg
    632.7 KB · Views: 109
  • 08924578-892E-4216-A731-D87978CAE92F.jpeg
    08924578-892E-4216-A731-D87978CAE92F.jpeg
    545.4 KB · Views: 120
  • FA875B1F-3552-4D85-AEEB-44B1ABDC44AF.jpeg
    FA875B1F-3552-4D85-AEEB-44B1ABDC44AF.jpeg
    600.8 KB · Views: 117

Issues bumping back the shoulder on brass

I ran into a strange situation today and wanted to get feedback from the horde on what could be causing the issue. Here's the situation. I am working on a load for my 6.5 Grendel. This is what happened.
I started with 50, four time fired Hornady cases. All the cases were fired from the same AR. Using the Hornady LNL progressive press, I de-capped the case. Then I bumped the shoulders back to my standard 1.208" measurement. And that's where things got interesting.

Of the 50 cases, 31 came out at 1.208 +/- 0.001". However, 19 of the cases had a headspace/shoulder measurement of 1.212 or greater, up to 1.214. And even when I ran them back through the Hornady sizing die, the shoulder measurement did not change. I took another few cases, from another group, fired from the same gun, not the original 50, and those five all bumped back to 1.208 with no issue.

I'm baffled. Any assistance or ideas would be helpful. Truth is, I can discard the cases and move on with the 31 I need for load development, however I am curious to what could be causing the issue with these cases.

TIA

Accessories SOLD

NIB, will include Pelican 1750 case.

Defiance Machine RUCKUS Tactical
Medium Action

Proof 24" Carbon Sendero Barrel

TriggerTech Diamond Remington 700 Green
W/Black Parts Two-Stage Flat

Magpul Pro 700, Folding Stock – Remington® 700 Short Action

Barreled action is from Altus.
Willing to part out.

Attachments

  • 1C48522B-D1EC-4B69-BC58-6785CC87E6B3.jpeg
    1C48522B-D1EC-4B69-BC58-6785CC87E6B3.jpeg
    208.8 KB · Views: 246
  • 4223E97A-CAA4-495C-B381-2A742D776370.jpeg
    4223E97A-CAA4-495C-B381-2A742D776370.jpeg
    224.1 KB · Views: 243
  • 1C96337D-A7AF-426D-AAB2-868A5CB477C4.jpeg
    1C96337D-A7AF-426D-AAB2-868A5CB477C4.jpeg
    532.6 KB · Views: 251