Ill take one.

sirhrmechanic said:

You would think they have learned by now that putting a woke 30 something CEO broad in charge of your American icon is a bad idea.

View attachment 8752124

But not only did it lose a huge portion of its value yesterday during its rebranding and announcement of a pride, initiative, but Cracker Barrel has lost 58% of its stock value since she was appointed in 2023.

This broad must be completely tombed deaf if she has not seen what’s been going on in America the last six months.

She should be removed from her position by the board immediately and terminated.

Remember, it’s a public company so it’s your 401(k) that is eating this.

On the bright side, at least she hasn’t appointed Dylan Mulvaney yet as their spokes faggot.

Click to expand...

Just to be clear, she’s 53 years old not a 30 something.

bump

LeftyJason said:

There is a big difference between who you were referencing and others. I feel you definitely skew much much more @sirhrmechanic level of rant.

Click to expand...

Is that a good thing?? Or should I give myself a Clavin??

Lol. Do as I say, not as I do, huh?

padom said:

You actually dont. Ive bought 3 suppressors from dealers "other than SS" the past 45 days.. Takes you one time to have your fingerprints done electronically into the ATF approved .EFT format. Local UPS Stores do it and email you your .EFT file.

Place orders right from the shitter, attach your fingerprint .EFT file, upload your photo and thats it. All from the shitter. I did 3 SBR's right on ATF Efile website all from the shitter this same way with EFT file...

Things have become so easy now. And 2 cans waiting on my doorstep shipped right to me.... SS doesnt ship to your door, they only deal with their dealer network. This is the main reason why I used Capital Armory and not SS on 2 of my last 3 can orders.

Click to expand...

I checked for UPS stores though through certifix. The closest ones to me listed on there are 150 miles. I dont know if there are other options. It's probably worth the 150 mile drive just for that to simplify the process.

Terry Cross said:

Glad to share.

Almost didn't cause it's a LOT of words in one post and I didn't want to look like L . . . . . .well . . . . you know. . . some forum members can type like a mad man! LOL.

Click to expand...

There is a big difference between who you were referencing and others. I feel you definitely skew much much more @sirhrmechanic level of rant.


First thought reading this reminded me of something that we go over roughly once every four years since I was in high school.

It's sad how often it happens. The way to break it is to remember God and the lower half can be lessened.

100% fatality in mice.

I would not eat there if the CEO was a race car driving, 3 tour combat vet, world record musky holder, guy that bangs 6 hotties per week.

ELR researcher said:

What, specifically, did Mike attribute the hang fires to? If known-good primers and no shallow primer strikes, very hard to understand that it took anything more than an instant for the flame to reach the powder. Did the recoil seem "normal". Sorry to belabor the point but can you get any RWS primers to try? The consistency of mil boxer primers, even within the same lot, would be a major concern for me - if I was looking for more than just going bang.

Click to expand...

Mike stated that the 50 primers don’t have the ignition to light the powder fast enough. Hence why it is recommended adding black powder or pistol and a wad to help ignition.
No light strikes on the m36a2 primers. No failure to ignite in M36a2 primers.

We had an issue with large pistol magnum primers. Was loading 500s&w, when I didn’t have large pistol magnum primers, during covid, I tried large pistol primers. Every time the pistol was help up pointing in the air, then fired at a target in front, it would ignite. But the 2nd round without “resetting” the powder directly on the primer, would have a delayed ignition. It was a very repeatable issue. Point up, then aim, pull trigger, BANG. Leave the pistol horizontally, pull trigger……..BANG. So we stopped loading those primers. Then large pistol magnum primers came available. Literally the exact same load, every bullet works no matter how we tried to manipulate the powder.

That was basically the same issue with 50 primers. Never an issue with m36a2 primers. I’ve loaded and shot over 350rds in the 20mm. Only those 50 primers were ever an issue.

A lot of dead people and our billions spent and we are basically right back to square one.

Not to mention a country in ruins.

Is this not exactly where we started less billions in stolen graft?

The wife is constantly burning up these little coffee frothers to the tune of $15-20 a piece. We've probably been through four or five of them now and I finally hit my breaking point, so I fixed the problem.

I give you the industrial coffee frother. Be careful though, or you'll have coffee all over the counter.

I used a piece of 1/8" 316 tig wire for the shaft and cut the end of the old frother off and welded it to the new shaft. Used a Miller dynasty and 1/16" tungsten. Probably didn't use more than a few amps.

You might need to give Kestrel support a call 1-800-784-4221 or maybe Doc can chime in. I am just making an assumption that they are compatible because the Kestrel 5700x WEZ is just the Kestrel 5700x elite with extra software to toggle some unknowns to try and make a better shooting solution prediction. Good luck!

trophyhunter said:

Well those CCi’s did fine in Barrett, hand loaded ammo.
They looked like normal strikes in the Anzio, after ignition, but with the 2 hang fires which I’m assuming cause we didn’t add either some black powder or pistol powder with some cotton weird stuff I decided not to fire anymore. That and the ammo loaded by Mike was having issues at the case mouth being to swollen from the bullet driving band contacting the mouth causing a flare.
None the less I will not pursue the 50bmg primer idea.

Click to expand...

What, specifically, did Mike attribute the hang fires to? If known-good primers and no shallow primer strikes, very hard to understand that it took anything more than an instant for the flame to reach the powder. Did the recoil seem "normal". Sorry to belabor the point but can you get any RWS primers to try? The consistency of mil boxer primers, even within the same lot, would be a major concern for me - if I was looking for more than just going bang.

"Fertilize the Moron farm"

OREGUN said:

Strong preference for ZCO out of those two. Check the px. I think there’s a couple available.

Is the 5-40 still suffering from erector trouble or has that passed?

Click to expand...

Sounds like a case for Cialis

PM sent

Bingo

MWAlex2 said:

Login to view embedded media

Click to expand...

Uganda? Good luck illegals...

That’s a Nosler 210ABLR. They are going 2725 fps out of that 20” barrel with R26. I sent that one at 600 yards and it hit just right of the center, so I guess bullet tip deformation doesn’t really matter . Case study of one round.

EddieNFL said:

The car may or may not be. The driver almost never is.

Click to expand...

It’s great when you see guys data from a lap and they swear that they’re faster

1. The lap times of 4-5 consecutive laps never are (unless your good enough to be sponsored, 1-2 laid maybe not a whole 20-30 minute session)

2. You look at where and how much brake, throttle, steering angle etc…and it’s all fucked up.

3. The information tells you you’re fighting the car which is why it’s intervening so much…but some guys just don’t get it.

Fig said:

How about this one?

This is actually hard, because that looks like it could be a couple of different cuts to me. Something to scale it would help, so I’ll say this is one of the smaller chunk cuts.

Click to expand...

Tri-tip

They do very well with a long marination. I like to do a bloody mary marinade with them, but I use gin instead of vodka. Boil the marinade after 24 hours and use it to baste the meat over a direct medium fire. Cook until about 120 degrees internal, rest 15 minutes, slice across the grain.