Latest activity

Hot Threads

Latest activity

 Posts Forum list
 

Filter

7 Rem Mag - 7 WSM - 7-08

XTREM HTR16
Ex E6 said:
Simply curious as too why You would want a slew of 7mm rigs ,when supposedly the 7mm PRC is the cats cover . No reference to pinto .:confused:
Click to expand...
First 7PRC is one my local gunsmith rigged up for me on a barrel I had sitting in the gun room, just to try it out.
Second was full build that I sent to George and GAP built for me, 24” Bartlein CFW barrel.

Pinto - reference Animal House. If you’ve never seen it, you’re missing out….
Click to expand...
  • Like
Reactions: Ex E6

Annealed brass opinion

straightshooter1
Holliday said:
I loaded those cases today and was disappointed to find that I had to keep adjusting the die to maintain cbto. Fingers crossed, 🤞 the results will be better when I shoot them.
Click to expand...
Hmmm???

It's can be hard to "maintain CBTO" when there's a variation from bullet to bullet in the distance between where the seating stem makes contact and where the comparator makes contact.

I don't pay much attention to CBTO as measured by a standard comparator because of this issue and why I sort bullets by CBTO as measured to where my seating stem makes contact. This way I know seating depth (how far the base of the bullet is into the case) is very consistent. Of course, not having too much interference in the neck helps with consistent seating. ;)
Click to expand...

.308 Winchester

straightshooter1
45-90 said:
So it appears that the early cases made by Sig have more capacity and may measure slightly different, then the new date marked cases...I heard LC was tooling up to make them some time ago.
Mine hold 58.3 gr H2O.
51 grs of powder behind a 208 Berger, got a head expansion of .469" / .4688" and tapers back to .467" over the solid head, where it's unsupported by the chamber.

The Stainless steel head tapers up to be thin like the brass at the joint, making the Stainles expand a bit more there because it's so thin.

Actual 308 factory chamber, and a high pressure, 75,000 psi hybrid case fired, still fits, all the way in.
The unsupported part if the case head where your FL die never resizes, measures .467" to .468" that is the critical area between brass and stainless.
Brass expands in this area quite quickly after 65,000 psi, and stainless doe not, dropping or blowing a primer in the brass case.
So when running the high pressures with these different case capacities, one should leave some room in the upper psi limit.
Chambers and barrel tolerence differences will also add to or detract from the final max psi in the case upon firing.
Click to expand...
Yes, the case head where the FL dies doesn't resize measures at .467-.468" before and after firing and remains so after firing. That upper/thinner part of the steel that expanded to .470" gets sized down to .468 in my FL sizing die (still using plenty of lube ;)). . .and being the same sizing I get on my Lapua brass.

I can't tell who manufactures the cases for Shell Shock Technologies. It does appear there's more than one producer???
1749957104557.jpeg
Click to expand...
  • Like
Reactions: 45-90

Suppressors Form 4 wait time

oldrifleman
Holliday said:
So if the law was to pass in say July or August, people will keep submitting applications and $200 until the end of the year?
Click to expand...
I know I will pay it because my “Freedom Loving” ( read Commi) state may just take the opportunity to stop their sales. And I don’t trust the courts to protect our rights any more than they have for semi autos!
Click to expand...
  • Like
Reactions: Holliday

SOLD Vortex Strike Eagle 5-25 MRAD with MPA BA Mount

C
Vortex Strike Eagle 5-25 MRAD with 7 EBR-C mil reticle. Comes with all the stuff that comes in the box. Functions flawlessly. Has been used in a few matches and has the typical wear marks and scratches. Glass is fine though. Also including an MPA 1.125” 0MOA BA mount. No trades. $650 delivered straight to your front door OBO.
Click to expand...

Attachments

  • IMG_8718.jpeg
    IMG_8718.jpeg
    2.3 MB · Views: 39
  • IMG_8721.jpeg
    IMG_8721.jpeg
    1.8 MB · Views: 32
  • IMG_8722.jpeg
    IMG_8722.jpeg
    1.3 MB · Views: 35
  • IMG_8720.jpeg
    IMG_8720.jpeg
    1.3 MB · Views: 32
  • IMG_8719.jpeg
    IMG_8719.jpeg
    1.1 MB · Views: 35
  • IMG_8728.jpeg
    IMG_8728.jpeg
    1.3 MB · Views: 33

Israel/iran

M
sirhrmechanic said:
Exactly.. that's why Iranian women are generally hot as hell! So are the Afghan wimmen... when they are not crapping in holes and scratching flea-bites.

That's why Islam is a bane on their existance. I mean, those hairy Palestinian chicks... put a damn Cinzano Restaurant Umbrella on them... it's an improvement. But Iranian women should be back in Mini skirts, pump heels and leather Teddy's, like back in the 1970's before the Mullah's screwed it all up!

Free the Iranian Ta-ta's!

Sirhr
Click to expand...
the Persian women i have known were indeed smokin'. smart too. most i have known were DRs. Arab women not so hot.
Click to expand...
Load more
Top Bottom
Back
Home
Forums
Merch
Alerts