codym said:

This isn’t right
6 creed 109 lrht at 2950 is 6.85 at 1k
At 3050 it’s 6.32
At 3150 it’s 5.84

100-200 fps is very significant it’s not a tenth in this caliber it’s 1.1 mils! I get what you’re saying running slower can be accounted for with good dope but a flatter shooting rifle can minimize ranging errors and be more forgiving elevation wise.

Now if you’re talking about wind then yes it’s only about a tenth.

Click to expand...

It is wind. Elevation now means nothing in PRS matches as you get your ranges so it’s just another number to dial. Back when people were running them at 3150fps was when there were some UKD stuff in matches but try that today and you will get all sorts of crybabies whining. lol

Shifty6BR said:

Took the Valkyrie out after its hiatus, 20" Craddock testing some 60gr vmax load workup then this. Happened 2nd shot from the start on the lowest charge group tested, perhaps it was just it's time, not sure wtf happened. Luckily I'm only a few minutes from the range, grabbed another complete bcg returned and continued on. 60gr vmax is looking very very good tho.

Likely shoot the bolt mfg an email ...not very high round count on this bolt, easily less than 2k.
View attachment 8742856

Click to expand...

Just curious, how did you notice this had happened? Bolt not want to close?

Just use the alignment rod to make sure you have proper clearance to the bore.

DarnYankeeUSMC said:

No Amish

Click to expand...

Merica

I am working off of long lost memory, so double check me, but I think the original power pro 2000 book max was 47.7

up

up

ROFL , i think Fins beat Moscow 2 minute by about minute and a half

Login to view embedded media

I will take it.

45-90, thanks for the great pics (as always.)

Well, it looks like someone has thought of this before. Was on the CH4D site and they sell a reamer die for 510W. I need to call them anyway so will ask for details about that.

Took the Valkyrie out after its hiatus, 20" Craddock testing some 60gr vmax load workup then this. Happened 2nd shot from the start on the lowest charge group tested, perhaps it was just it's time, not sure wtf happened. Luckily I'm only a few minutes from the range, grabbed another complete bcg returned and continued on. 60gr vmax is looking very very good tho.

Likely shoot the bolt mfg an email ...not very high round count on this bolt, easily less than 2k.

Ronin22 said:

Pretty incredible 6-36 at 27oz

Click to expand...

Travel is listed as up 19, down 13.5. If there's something blocking 5.5 mils of elevation that makes total erector travel space 38 mils in a 34mm tube. Sounds like it would be light because it has a lot of air instead of glass in it. (Small diameter erector)

theonlykernel said:

Ruger American seems like the perfect action for you.

Click to expand...

If you see one in the For Sale section let me know.

Sold

+1 for Kelblys.

Unfortunately I haven't played with a Terminus, but I'd doubt either option would be bad. On the higher end, I have owned an Impact, Aero Solus, AI ATX, and the Kelblys is my personal favorite.

I saw this documentary

Quick Update:

V-Series Aluminum Magazines:
I'll have machined Aluminum first articles of the V-2210 next week! This initial effort for production is a milestone in the design, development and manufacturing process and, once parts are in-hand, the next steps begin and I'm closer to the LRIP, followed by flipping the larger switch into full-blown production. I'll be onsite for initial validation and will share photos with you guys as the process unfolds.

Also: For those continuing to reach out about the Pre-Order for the V2212 and V2215 Magazines, PRE-ORDER IS OFFICIALLY OPEN AS OF RIGHT NOW!!!!

The same process for pre-ordering the V2210 applies, and the V2212 and V2215 Pre-Order price is the same; shoot me an email ([email protected]) and I'll get you squared away. I'll announce Pre-Order for the V2217 at a later date.

X-Series Aluminum Magazines:
The X-Series (RimX Compatible) Magazines aren't far behind the V-Series and testing officially starts tomorrow. I appreciate all those that reached out to assist by way of offering up your RimX platform and time on the range. I'll provide details as the testing unfolds and keep everyone informed regarding availability.

Receiver Wrenches:
I have Gen 1, Right Hand Receiver Wrenches and will be shipping them, starting today. The remaining versions are through tumble and out for laser engraving and will be shipping week after next. For those waiting for the Gen 3, Right Hand, I appreciate your patience as I worked through a few things, but I had to ensure that what you're receiving is nothing less than the best.

Standard M5 and M5x Detachable Bottom Metal:
Manufacturing Engineering will begin after the LRIP for the V2210 Magazines.

V22 Parts: Single Screw Cocking Piece:
Gen 2/Gen 3, Single Screw Cocking Pieces are inbound and will be available as soon as they land. I'll post here when they're available, as I know many of you are dealing with the screws in the two-screw version loosening.

I've also received a lot of outreach about proper adjustment, which I have spoken to in the individual emails I've received.

*For the purposes of working with valid information:

**Do not follow the procedure outlined in the VGW video that uses a piece of paper to determine "firing pin location."** This procedure is wrong and references the wrong component and datums to determine proper adjustment.

Instead, bear-in-mind, when the adjustment is made, one is not positioning the firing pin, but instead, positioning the cocking piece relative to actual sear location. This adjustment is necessary because sear location varies across trigger brands and across triggers of the same brand. This is why the adjustment is necessary for optimal ignition tuning.

As soon as I have a few minutes (likely during X-Series testing at the range next week), I'll do a video outlining proper adjustment of the cocking piece.

Thank you to all that reach out and I appreciate this community being so responsive to the efforts that push things forward.

MB