Didn’t see a thread for 300 PRC load data. I want to collect some good loads people have tried to spare precious powder and primers for us that load 300 PRC.

I’ll start:

78 grains H1000
200 grain eldx
CCI 34s
Federal brass

Gives me pretty solid groups and right around 3000 fps in my 26 in barrel

Rare unit that is half PVS27 half PVS30 custom built by FLIR for a contract a while back (these things are awesome and very user friendly). Having owned multiple PVS30's and recently a CNVD LR, this is the best of all worlds and is the housing I would use were I to do another tube swap with Jay (just not in the cards for me). Optical collimation like a PVS30, easy to reach focus like the PVS24LR / PVS27 and the ability to handle real magnification / gather lots of light.

Took this as a partial trade, looking to get some cash. When these were available, they were listed at $5900 but I'll send this one to you for $5750 $5,000 $4250 shipped and I'll include a LUNA 3 and SF dual pressure pad (will add pics of that soon).

I spoke to Jay this week and he has some really nice tubes ready to find a new home!

Drove 4 hours to TVP Sunday along with my 338 Lapua Magnum sporting a 30 Inch Bartlein and SilencerCo Big Bore Harvester Suppressor and Vortex Razor HD

I shoot this rig monthly at Hillside's 1000 yard range. My handloads and factory ammo has been chronographed with Magneto and Radar.

I last shot this rig past 1000 yards last August at Camp Atterbury Long Range Shoot where I scored hits on Range 3 from 1000 yards to 2000 yards at 100 yard increments.

My load last summer at Camp Atterbury was Virgin Lapua Brass, 300 SMK, 96 grains of N570. Speed of 2900 fps.

My dope from Camp Atterbury was:

Temp: 75 Degrees
Elevation: 600 feet

Applied Ballistics App matched up with my actual dope.

This load is a 975 yard zero

1700 yards - 10.2 mils = 1 bullseye (12 points) , 1 black ring for 10 points and 1 white hit for 6 points
1800 yards - 11.9 mils - 3 black ring hits and 1 white


I had 35 rounds remaining from this batch of ammo that I took to TVP Sunday.

TVP conditions:

75 degrees
700 feet elevation

I confirmed my 1000 yard dope at .3 mils

Then began shooting at the small square steel at 1 mile.

Applied Ballistics - 11.3 mils needed

My first 3 shots were high 1 mil or so based on the dirt splash.

Set scope to 10.2 and placed the remaining shots on and just near the 18 inch plate.


This 10.2 would lead me to believe the distance is not 1760 but something closer to 1700.

Has anyone lased the 1 mile targets at TVP?

Oh, I played around with google maps too. Here's a picture using the distance tool on google maps. It shows the distance is 1 mile from shooting tables to the treeline. But the targets are not at the treeline. Is google maps measuring tool accurate?

Stumped...

Mike

Like new Glock 17 gen4 Summer Special. This was a limited run between g4 and g5. Has front serrations and night sites. Also includes case and 3 mags. $500 plus shipping or local pickup in Montana

I think I have this correct, confirming in the event I'm missing something?
Reference, moving however so slowly from the polished expander ball on standard RCBS 2 piece die set. I was using the die with the spindle removed and then a Sinclair expander mandrel-I know, over working the brass. My rifle is shooting good, I want to lower the numbers to minimize those outliers. I also felt that the measured mandrel(.2225 where the wear pattern is) didn't give me enough neck tension, I don't know. I polished the expander to give me .003, best I can tell.
My plan is to get the Redding Type S bushing die set, nitrided bushings--and should I also do the mandrels in which I was leaning on the 21st Century set-or at least the ones that will be one above/below the desired .002.
Anyhow, measured the 80smk loaded rounds-.246, as I understand if wanting .002, I should use a .244? If also adding the mandrel to give me the .002 +/-, should I go down to .243 on the bushing?

I'm all ears, please keep it simple for the retard and without suggesting gauges to check seating pressure, etc--joking in a sense.

I just shot at 300 the other day, 100% on a 4" plate with the 10 impacts under 2" or less as observed. A couple pics with what I'm doing now. The tic marks indicate my 1st 3 rounds on each group.
24" HawkHill, Area 419 HFM adapter, Nomad 30 with Ebrake. Debating putting the ATS tuner back on to piddle. Blue Mountain Precision build, the gun with my redneck mirage shield.

Looking to get into some .22 shoots locally. Curious, if there’s a reason why I shouldn’t go with a Curtis valor and .22 bolt? I like the option of being able to switch calibers, especially when I’m hunting in winter but could go with a dedicated voodoo/rimx ect if that’s a better move

Looking for a 30mm badger ordnance rangefinder mount P/N 306-165 - Let me know what you got

I have the following suppressor certs for sale.

SOLD! $1,300.
Thunderbeast 100% off up to $2,500 MSRP. No expiration.

SOLD! $750
Silencerco Scythe-TI 100% off cert. Must be redeemed by September 30, 2025.

LMT MWS MRGG-A upper with the correct serrated LMT BCG $2800
Login to view embedded media

New in sealed boxes
3 boxes of Lapua 300 PRC Brass
300 pieces total
Received for s project that did not happen
Sold

Any recommendations on who could replicate a Remington MSR/PSR/CSR Barrel Extension from donor extension?

See pictures for details.
34mm 0 MOA UMQDS mount in FDE
$400 shipped

Like new.
$200 shipped

Like new. Only used in testing
Liberty Precision Machine
Suppressor muzzle brake
Works very good

Fits dead air end cap threading. Like diligent defense cans.

$180 shipped PayPal FF or Venmo

No longer made us optics xlow 1.005 rings 35mm

These are also windage adjustable . Also made in USA.

Condition is lightly used

$85 now $75 shipped .

New Manners T4A Elite TAC, GAP molded. MCS-DBM Gen 2 mini chassis with one 5 round mag. For Remmy 700 and clones, M24 barrel channel.


$1550 shipped. Ships CONUS only.

This is the stripped upper only. Color is black. This is a take off upper from a LMT rifle. Used on one trip to the range, and is in excellent condition.

$750.00

Ships CONUS only.

Surefire Warcomp muzzle device. New in box (packaging, technically). Ended up opting for a Huxwrx can, and now using the Huxwrx flash hider instead.

$125 shipped. CONUS only.

I have for sale a set of NL Pure 10x42 binoculars. Swarovski undoubtedly has the best glass money can buy and these are their best set when it comes to quality and field of view. I used these for one hunt and they are in excellent condition. Comes with everything it came with new when I purchased them. Only reason I’m selling is because I am using my 12x’s more. Asking $2450 Shipped OBO. Venmo, Zelle, Cash App, Apple Pay, PP F&F. Plenty of references on here and happy to FaceTime or chat about them.

Another long shot here.
Looking for a TCS Max Rimfire with the dual m-loks.

Pair of Remington barreled actions.

1. E prefix in 300WM. Lilja mk13 profile barrel, finished at 25” with Surefire 4P flash hider. Had this build for a USSS JAR clone. Action trued and barrel chambered by Phoenix Custom Rifles. 0 rounds through it. $1200 shipped. SOLD
2. Stainless S prefix 243 win BA. Had this set aside for an XM3 clone, but decided I’ll try and get the serial number a bit closer. $550 shipped. SOLD

Payment via PayPal, Venmo, Zelle, USPS MO. If your FFL doesn’t accept from a private party add $35.

Has anyone tried this, and if so, was it decent?

Overwatch precision gen 1-4 Glock trigger parts. All descriptions listed on boxes. Trigger spring is 6lbs. Ended up getting rid of most of my gen 4 Glocks. Not looking to part out.

45 shipped conus

18” PVA, 6.5 Creedmoor, 8 Twist, Marksman contour, Nucleus Prefit with shouldered Barloc cut - $325 Shipped conus

Less than 200 rounds on it per the orignal owner. I bought this and never even torqued it down to use it on my action.

Comes with a spacer that should allow it to shoulder to arc actions without the Barloc. (Say should as I never ended up using it)

5/8x24 muzzle threads.

Pm me with any questions, trade offers etc

280/280ai still a good long action non magnum option? Or are there others Im not thinking of? Rebarreling a 270 at somepoint.