Up for Sale are Two Tall Outdoorsman Bino Adapters and 1 Large Stud.

Tall Adapters $65 Shipped.
Large Stud $20 shipped.

Buy and adapter with the stud and I'll ship both for $75. Take the entire lot for $140

Jimmy

What are your best rifle for a crucial ELR match?

Rattle canned and missing the parallax cap but class is clear. Has the 7.62 M118 been elevation turret and mil dot reticle.
$1075 shipped with insurance. Can send more pics upon request.

Creedmoor Sports Range Cart for sale​

$200 + shipping
Zelle or PayPal FF

Used once - excellent condition with all accessories.

Local pickup (Maryland) or will ship for actual shipping cost (I have discounted rates).

Pictures below are from Creedmoor Sports website, but I will post actual photos soon.

The Creedmoor Range Cart, also known as the CRC-1, is by far the strongest most durable range cart on the market today.

Some of the features of our Creedmoor Range Cart

• Machined from solid aluminum stock (not tubing).
• Scope Stand (not included) can remain on the cart for standing position and scorekeeping.
• Collapses into dimensions of 30"x17"x8" with no tools and in less than 1 minute.
• Solid 14" rubber wheels with bearings (no more flat tires).
• Includes attachable rifle case, rain cover, rifle rack, and scoring tray.
• A lower center of gravity makes the cart more stable on uneven terrain.

Each cart comes standard with a frame, stool bag, scope stand holder , rifle case, rain cover, ammo/data book tray, shooting mat straps, and now a rifle rack.

Your purchase of the Creedmoor Range Cart includes:
52" blue Creedmoor rifle case.

Data book table (tray) that can be secured either to your 1" scope stand or the side of the range cart as well as used in placed on the ground to keep ammo and data books clean and dry.
(CRC-Tray - A $50 value)

Water-resistant rain cover that covers the range cart top to bottom.
(CRC-COVER- A $50 value)

Rifle Rack Mount that works with any length or type of rifle.
(CRC-RACK- A $69.95 value)

Tragedy indeed…. But no one who saw the short movie “Sweet Sundays Gone” ever forgets it. Even the updated version is pretty shocking to a teen!

Wonder if it got dropped for “sensitivity”. Or because Hunter Safety moved online during Covid? Not sure. Our town moved it from the PD where we volunteer taught it to the “Recreation Department” and they didn’t want any of us “old timer” instructors. It’s all run by “book course” now with no actual hunters teaching it. All of us who used to teach it had been in the woods since we’re were little kids. Now… sociology majors.

I had been teaching it for 41 years when they dropped us. Iwas the youngest certified instructor in the state when I got certified at 18. Taught in 7 states over the years. Always a shortage of instructors. Thought about picking it up in another town. But never bothered.

Anyway…. I hate reading these stories.

Stay safe in the woods this fall! Identify your target as if a life depended on it. It does.

And teach your kids or grandkids well! I know folks here will!!!

Sirhr

This is newscum trying to get around the thing the dems put in place so that no one governor could re-align the districts in Kalipornia to favor either party....

EVERY "registered voters" in CA got one of these books for one item in the election. AND they will mail out ballots to all of those same "registered voters"...

This is going to cost the state (who is broke) $300,000,000.

HARD NO on this (Prop 50) for me. Don't be fooled by the propaganda...

PHUCK this guy...

So I reached out to @geeoff for one of his Kestrel and Garmin chrono foam inserts.

He said he can do custom inserts so I asked him”can you do one for a Trimble Nomad?”

Sent him some pics and dimensions and a few days later I had a box on my doorstep.

It fit perfect!

If you need a custom insert, do not hesitate to contact him.

Tangent Theta
5-25
Mil
Gen3 XR Fine
Bought new this year - 2025

Used on my back up rifle.

Will get some more photos after I remove it from the rings.

$ 4600 with Hawkins rings

New Ruger (McRee) 1022 folding chassis, red $400
Plus ship.
New Shaw fluted barrel with threaded muzzle. $150

Spuhr 6602 20moa 1.5” high, 36mm

Good condition, leveling wedge and extra screws included. Spuhr level included

Price $370

Any questions please reach out.

Anyone had experience using an XLR Element vs let’s say, a manners for hunting? Thoughts appreciated.

Bought these to play around with and am no longer using them.

AI M27 6x47 Lapua barrel, 24", 5/8x24 threaded, chambered by SAC, ceracoated a bronze color, don't remember the barrel blank, 1:7.5 twist, tapers from 1.25 to 1.01", 300 rounds down the tube- $350. SOLD

AI M27 6 Dasher barrel, 26" long, chambered by Robert Gradous, threaded 5/8/24, normal AI taper, unknown round count (250 by me) - $200 SOLD

Payment via PPF&F, Zelle or USPS MO

Prices are shipped anywhere in the CONUS

Accurate mag aics 5 round 30-06 3.850 length mags. Both new, one still in package.

$85 shipped for pair

PP FF/Venmo

Been out of the game a few years and thinking about getting back into it. I currently have 2 tbac ultra 7 cans and a kgm 6.5 and I'm thinking about adding a braked can to the mix. I don't have an issue with losing the target during recoil, my prs rifles do move but very little. My 7ss does occasionally kick me completely off target.

What's the consensus for top cans? I see a lot of people bragging about the Abel cans and I see tbac still has a huge wait list for cans. This can will probably go between my 7ss and probably the ar10 I'm building

Leupold VX6HD 3-18x50 SFP Firedot reticle. Like new in box. I got it on a trade and don’t need it. Was told it wasn’t ever mounted but it had a rub mark on the housing. $1250 $1100 shipped.

Open to trades:
-Tract Toric MIL
-Zeiss Scopes in MIL
-Vortex Razor Gen 2 MiL
-Leupold MK4hd MIL
-1-6, 1-8, 1-10 optics.
-CZ 457 action
-REM SA chassis/stocks
-Lapua Center X, Lapua Long Range, Lapua super long range
-Eley Match
-Kestrel 5700
Anything prs related.
If not listed just ask.

Got this rail a while ago for a build I ended up breaking down and have no use for it now. Nut end was lightly sanded to get a perfect lockup, shouldnt make a difference in function.

$175 TYD OBO

Made some MLOK weights for myself
Had some material so ran a few extra sets.

Brass weights - require two MLOK slots
1 LB 2 oz with hardware per set (set is 2 weights)

Come in beadblasted or machined finish, please specify.

Contour around the recoil lugs are machined .010” deeper to ensure everything sits flat.

$70 with mlok hardware - shipped

Thanks!

I didn’t see a thread that seemed to capture all the data in one place. A buddy gives me all his once fired. My dies should be here tomorrow. I’m hoping to match or get close to my 223 bolt gun loads in a gasser.

What loads are working for you guys? Velocities? Barrel length? Gas or Bolt gun?

Thanks in advance.

I know these haven’t really been out long enough for there to be much info on them yet or any real reviews but I’m interested in one as it seems to check alot of boxes for me as a do it all hunting scope. So what I’m interested in is how does Steiner typically stack up against the other big names in the optics world such as Nightforce, Zeiss, Trijicon, Leupold etc. mostly concerned with durability, holding/return to zero, tracking and to a lesser extent, glass quality.

Thanks for any input and hopefully the link works.

Vortex 30% Off MAP Certificate @ EuroOptic that I don't have a use for
Expires October 7, 2025
$99 PayPal F&F

Upon purchase, I will send a pic of the unique code for use on the EuroOptic website.

Shilen #5 .264 1 in 8 blank finished at 24”, threaded 5/8-24, chambered by a local gunsmith for Rem700 action *barrel only, action not included*


LEE 260 collet die set (used approx 50 times). .260 trimmer

Majority of firings were Federal 260 GMM for fire forming.
280 pcs 1X fired/ formed 260 GMM brass
50pcs 2X Fired 260 GMM brass


Just started reloading this round with IMR4955
Most promising load was 44.2 IMR4955, 2.755 COAL @ 2735 FPS, ES-19, SD-7.

Looking to get $200 for everything shipped

SLC 15x56 in original box - $sold

Will also throw in RRS plastic clamp.

Can send more pictures upon request.

So I wanted to see if anybody has dealt with Sgt Of Arms since the start of 2024. I have had a barrel on order from them since January 31 of 2024 and was given a 12-20 week lead time. Which I was fine with. Obviously we are over double that and then some. I checked on it a few times once it got over the estimate and got told about them moving barrel work in house and that setting them back a few weeks and I understood. So I’d call 1 time a month ish to see what the status was and got a new excuse every call. Now as of the last 3 months it has become nearly impossible to get them to answer the phone, they will not return voicemails either. Their website is automated and they don’t respond there too. I was finally able to get somebody to answer Monday and voiced my concerns. I was assured I’d get an answer on my order and the status by end of day. I have still not heard back and tried calling again yesterday and left yet another voicemail. I have tried calling quite a few times today and different times and still can get anyone to answer. Has this been the experience with anyone else lately? I know Eric is supposed to be a great guy and all and the company has a great quality track record, but this customer service is inexcusable and was curious if other people have the same issue.

TLDR:
Sgt of arms customer service is nonexistent and it makes me question doing business with them especially considering the fact that I wasted an entire year waiting on a product I still have yet to receive.

I've been working on starting to reload for 8.6 blk and figure it would be good to start a thread and share information specific to reloading.

Q has some tech data posted on their website here - https://liveqordie.com/86-technical-data/

Cartridge Print - https://store-fwcq7xdl4a.mybigcommerce.com/content/8.6BLK CARTRIDGE.pdf

Chamber Print - https://store-fwcq7xdl4a.mybigcommerce.com/content/8.6BLK CHAMBER.pdf

The first hurdle was figuring out a way to resize brass since factory brass I'd imagine is a ways out. I did manage to get my hands on a set of prototype 8.6 blk reloading dies that I'll be using.

Left is a Q head stamped piece of 8.6 blk brass, the right is once fired Hornady 6.5 Creedmoor



I noticed at first I was getting some ripples in the neck when I did a full length resize and neck up from 6.5 to 8.6 all in one step.


Running the brass through an Annealeez proved to give much better results when pushing the shoulder back.

Bulk 250 bag of 250 pieces
Hornady 108 grain ELDs
Sold