Hello all,

New member located in West Michigan but will mostly be shooting more towards the middle of the mitten.

Thanks for your time,
Matthew

Sold

SP4002 with an A-0029 Raptar, 10mm riser, all necessary hardware, and extra ring screws.

- $old

34mm / 1.5” Tier One Long Saddle. Still has some evidence of paint on it.

- $old

Prices are to your door.

Morning All
Has anyone been to this school in WV,, Razorback Tactical ? Thinking about attending in the spring. Just looking get any feed back. I attended a shooting class in VA last Fall which was a total waste . Don't want to make the mistake again ..
thanks

Scalarworks Leap/09 34mm scope mount with scalarworks kick/02 offset rmr mount.

Mounted but in excellent to like new shape.

Paypal FF preferred.

Would trade for rmr. Looking for smaller dot...rm09.

Like new vortex razor 1-10 EBR-9 MRAD. Includes everything that would come with the scope new...box, throw lever, sun shade, plus a set of aadland scope caps.

Thinking about building a 18-20" Grendel. Will be shooting with my son at a local 1000 yard range and was thinking of building a upper for those ranges. I see stuff out there for Grendel but it sure doesn't seem to have taken off quite like 300 blackout or similar.

Is it worth the squeeze?

just messing around. works well though

I have a used Vudoo Gen 360 with a 20” MTU Barrlein barrel threaded sitting in an ACC Gen 1 with some home made weights that balance nicely.
$2700 for everything shipped to ffl. Can split.

Been to the range twice. Just decided I like the PR2 reticle better. Will trade for a Mark 5 with PR2 reticle or sell. Mount no included. I also have the factory box. 1800 Shipped

Nightforce UltraLite 1.00" x 30mm Scope Rings | $140 shipped

Like new condition Audere one piece mount in black. 34mm tube, 28mm height, 0MOA.

$280 shipped

Bought rifle used a month ago. I immed noticed feed & eject problems with several Hornady ammo types, but Hornady Match seemed to work ok. That's now changed. Hornady Match no longer feeds or ejects reliably. As you read the symptoms, keep in mind that symptoms have gotten progressively worse over the last month of prob 60rds fired. Ideas from the brain trust?

Symptoms:

1) The pic below shows the part I'm talking about. As I understand it, that bit is the (I'm making up the name) positive feed case rim grabber. To my surprise, it flops in and out of position, vs. having any spring behind it that might keep it flush with the bolt face or proud of the bolt face. Sometimes it seems to grab a rim, sometimes it stays rearward and doesn't grab the rim, sometimes it goes proud and the case sits not on the face of the bolt but on top of the forward rim grabber. Spring missing?

2) Rounds don't want to chamber all the way in. Sometimes I can see them hanging on the case rim grabber and therefore not seating back against the bolt face, but sometimes the rear of the case seems to fit against the face fine but the bolt is still reluctant to go the last little bit forward so that it can then be rotated down. To be clear, the bolt won't rotate down into place when feeing a round. Sometimes the case looks to be properly positioned under the rim grabber, sometimes it's sitting on top of the rim grabber--but either way, that bolt isn't gonna rotate.

If every round was sitting on top of the forward (proud) positioned rim grabber, that would explain ammo getting shoved too deep into the chamber, but since many of the cases don't appear to get stuck on top of a proud rim grabber, but instead the case's rim is properly seated under it, I worry that I'm looking at more than one issue.

3) Once the round is fed such that the bolt is forward, but won't rotate down, now the bolt won't go rearward w/o a gentle tap with a rubber mallet. Like maybe the rim grabber has a good grip on the round, but the round doesn't want to come out.

I called Devildog so see if they might have some insights, but they're not answering their phones nor responding to emails. They also don't make the Hog anymore.

Bolt does fine with no ammo. Symptoms same with both mags. using a chamber brush, I cleaned the heck out of the chamber area. There's no failure of the cartridge to move forward from mag to chamber, it's the last couple mm of round insertion that is the problem. Rounds eject fine, once bolt gets bonked open.

I'm thinking the rifle needs to go a smith. Be good to have some insights tho.

I bought this for a project and decided to scrap it.
22 cal 1:7 twist 27" as it sits
$575 shipped

SOLD

I have a lightly used, Leupold Mark 5HD 3.6-18 with CCH reticle, non-illuminated in a Reptilia mount (paid $300) with Flatline Ops bubble level (paid $130). No box unfortunately.

Hoping to work out a trade for a Nightforce NX8 or ATACR with Mil-C reticle in the 2.5-20 or 4-16, FFP. Will also consider Kahles K318i.

Will do $1500 shipped for scope, mount, and level if a trade can't be found.

Will post some better photos when I'm back from work.

Login to view embedded media
To protect citizens from organized road piracy TN has passed first of its kind law and they did it quickly after more then 600 false arrests.

WTS excellent condition to Volquartsen VT2 in 17HMR & 22WMR. This is the long fore-end version. The 17HMR has around 250 rounds through it, and the 22 WMR has around 150. I'm only selling to free up some funds. It includes the rife, both barrels, 1 mag, test targets, and original case. The optic isn't for sale, unless the buyer of the rifle is interested in an additional purchase.
Price - $2600 $2550 $2500 shipped from FFL to FFL
Trades - Kahles 1-8, 375 H&H ammo, Swarovski Z8i 1-8, new version Swarovski Z5i+ 2-10x42 BT Plex, Zeiss V8 1.1-8, Zeiss V8 1.8-14
Payment - cash, PapPal / Venmo / Zelle (you eat any fees)

F/S: 300 pieces of Peterson 6.5 Creedmoor Brass
Small rifle primer
Brand new unfired still sealed in box.
$300 Shipped

Interested buyers must message me first. I will not message you to prevent fraud.

I am picking up a new AT-XC and trying to decide if I should go 6BR or 6GT.

I already shoot 6BR with 108s and N150, but I’m wondering if moving to 6GT is worth buying new brass and dies. I should be able to still run my 108s and N150 in the GT.

Any thoughts or experience on one versus the other?

Looking for an xlr chassis, I was dumb and just sold mine.. decided not to go the manners route and do a chassis instead. Short action, not bedded, and carbon accessories are what I'm looking for

Login to view embedded media
Ummmm... interesting declassified documents!

Sirhr

Moved to the south so don’t need all this any more.

Aegis XL jacket $200 shipped.

Aegis XL Tall bibs $200 shipped.

Light weight warm weather shirt ( not sure of the model it’s older and tags have faded)
$50 shipped.

Over whites including pack cover, mits, and beanie. $100

Can combine and give discounts.

The aegis jacket and bibs have very little use.

The light weight shirt has quite a bit of use but is in good shape. I can’t Find any noticeable wear and tear other than the tags being faded out from being washed probably.

The over whites I might have used 1 time, they look brand new.

Excellent Condition Gray Ops Mini Gun Plate V2 w/ Mini Plate Pad, Brass Weights and Brassiere for AG Schmediums.

$230 shipped for everything.

I have a Bushnell Elite Tactical HDMR II with Horus H59 Reticle that is in Like New condition with box and everything that came with it from Bushnell. Item Number ET36215H25

Also comes with IDTS Ballistic Tape (1 applied, 2 un-used) and Vortex Defender Scope caps.

$750 Shipped

Extra: DST Precision D.F.A.T. System +$75

Custom McMillan from a project that I moved on from. I have over $2,000 into this with DBM, Cerakote, EFR, bedding, etc.
This has been in a few other posts, but I am making a new dedicated post for it here. Want to move!

$1,250 shipped, including the Hawkins M5 DBM that is cerakoted to match.