Selling Curtis custom axiom in 6 dasher 1:7 twist built by alamo precision has about 850 rounds through it

Shoots great, I think I shot in 1 or 2 comps? Now I am focused on NRL hunter and don't shoot this.

Chassis / trigger sold

Barreled action, no brake, mag $1350 shipped$1300 $1200 1000$ shipped someone buy this thing before I give it away.

Trades - Left handed bolt action, 25 cal barrel blank or 25 creed light contour

Used MPA D-3 6.5mm muzzle brake.
$80 shipped

For sale one Bartlein BB400 steel barrel blank.
29 inches long, MTU contour, 1/7.5 twist. Was backup blank for my 6mm dasher, not shooting much so it is for sale.

Price is $600.00 No long wait time and lower than new price.

Cross posted

This is brand new. I bolted in my Vudoo and took one trip to the range. Going a different route with another build. Not a mark on it.

Manners LRH-NV

• Right Hand Rem 700 SA or Clones
• Micro Chassis
• M24/ Proof Sendero Barrel Channel
• 1” Decelerator buttpad
• EFR NV Bridge
• Altus Highland Color w/High Gloss finish
• Wiebad cheek pad
• Hawkins M5 DBM w/action screws

$1300 obo shipped

Would trade toward a ZCO 420 or 527 with cash on my end.

Both benchmark barrels for Terminus Zeus QC chambered by TS Customs
Details are in picture but here are basics:

Black barrel is 6GT MTU+ contour with 208 rounds through it. Shoots great, attached is 10 round group at 100yd with 108bt and 32.5gr Varget. $525

Brown barrel is 6.5 Creedmoor with 0 rounds, MTU contour. *Sold*

Just moving to some lighter contours, only trades would be a 24” Proof carbon Sendero Zeus prefit

I made this post this morning...piece of shit controlling my account deleted it.

FYI

Member formerly known as BoilerUP until a dipshit hacker took control of my account

$1200 shipped. Excellent condition.

Comes in a Geissele Mount. Comes with Caps. No box. Excellent Condition.

I have too many right now and am just freeing up some space.

$2250 Shipped.

Will package it together with the Sage Dynamics SOLGW 13.7 rifle if interested as well.

B&T atlas v8 with ADM pic adapter and annex defense throw lever $230 shipped. OBO

Good morning, Members!

Below is an updated list of the remaining firearms I have for sale as of 04.21.2025.

I've added a couple of firearms to the list that weren't on the previous list.

Please reach out to me for photos and further information regarding any of the items.

UPPERS

Daniel Defense DD5V1 7.62
Complete Upper
16 Inch Barrel
Keymod
$1000

BOLT ACTION/LEVER ACTION/SHOTGUN

LRK Mechanical Custom Competition .308
Remington 700 action
24” Snyder barrel w/ 1-12 twist
Pacific Tool fluted bolt w/ Sako extractor
Heavy recoil lug
Speed lock firing pin
NEAR Mfg 20MOA pic rail
Shilen trigger
Pacific Tool steel bottom metal
Robar SR90 stock w/ adjustable LOP and check piece
Load data for .308, accuracy load including tables and trajectory
Range data - yards and meters
0.25 MOA accuracy
Test targets
150 round count
Retail: $3500 build
$2500

Cooper Firearms Model 54 Jackson Game .22-250
.22-250
1/2 MOA accuracy guarantee for centerfire cartridges
AAA Claro Walnut stock, roll over cheek piece, semi-beavertail forearm
VE hand checkered grip in a cross-over multi point pattern
Hand rubbed oil finish
Pachmayr recoil pad and steel grip cap
24" stainless steel barrel
Matte metal finish
Detachable magazine, M51 Four (4) round magazine, M54 & M52 Three (3) round magazine
Fully adjustable, single stage trigger
Weighs approx. 6.3-7.75lbs
MSRP: $3395
$2750

Benelli Cordoba
12 gauge
30” porteed crio barrel
Soft top combo
5 crio chokes
Ultra-reliable Inertia Driven system
Comfort tech recoil reduction system
Grip tight Real Tree finish
MSRP: $2099
$1600

TACTICAL

HK MR762 A1
.308/7.62
16.50” barrel, 1 in 12 inch twist
Proprietary HK short-stroke gas piston
Cold hammer forged cannon-grade steel barrel
HK G28 Adjustable Cheekpiece Buttstock
Advanced Armament Suppressor Adapter
MSRP: $4200
$3500

Daniel Defense DD5V4
6.5 Creedmoor
18" Cold Hammer Forged proprietary steel chrome-lined heavy barrel
User-adjustable gas block
Superfinished and DLC-coated bolt carrier group
Buffer equipped bolt carrier
Enhanced extractor
Innovative 4-Bolt Connection System
GRIP-N-RIP independently ambi-charging handle with anti-gas
MSRP: $2900
$2500

LMT Defense MWS
Multi Caliber Semi Auto (6 barrels included)
SilencerCo ASR suppressor adapter
Upgraded trigger pin set
6.5 Creedmoor 1/9 SS, 20 inch barrel
243 WIN 1/9 SS, 20 inch barrel
338 Federal 1/10 SS, 20 inch barrel
260 REM 1/9 SS, 20 inch barrel
.308/7.62 NATO 1/10 CB, 16.5 inch barrel
7.62 NATO 1/11.25 SS, 18 inch barrel
MSRP $6900
$3750

Precision Firearms Model PF-15B
Semi Auto
6.5 Grendel
24 inch barrel
Upgraded grip, trigger, bolt release and safety lever
SilencerCo ASR suppressor adapter
Tango Down bipod
MSRP $3075
$2250

HANDGUN

Les Baer Custom 1911
Ultimate Tactical Carry 5” Match Model
45 ACP
Baer steel NM frame
Baer steel NM slide w/ front and rear serrations
Baer NM barrel w/ stainless match bushing
LBC deluxe fixed combat front/rear tritium sights
Lowered and flared ejection port
Baer Checkered slide stop
Baer extended ejector
Baer extended safety
Baer aluminum match trigger, crisp 4 lb pull
Baer deluxe commander hammer and sear
Baer tuned extractor
Beaver tail grip safety w/ pad
High checkered front strap
Flat checkered mainspring housing
Beveled mag well
Polished feed ramp and throated barrel
Custom ivory grips
Blued finish
MSRP: $3200
$2500

Looking for 34mm 1.5” scope rings. Preferably diving board compatible. Seekins, vortex, Hawkins, grayops, area419.

typical ak if it loads and fires SOMETHING is probably getting ejected . I've had a few brass cases torn in half and ejected [S & B ammo] by a riley ak 47 with less than 1 k through it . I had bought a case of sellier bellot FMJ because my RAS stash is getting low and hard to find , it has to be non magnetic for some of my range rules . The front half come right out with very little effort using my home made case extractor , i was going to just use steel case stuff because that never gives me any problem in my aks but then i go no go gauged it ........failed badly . 3 years out of what i thought was warranty and riley said send it back and they will fix it for free . to-days safety tip is use those gauges on your semis

Atacr 1-8 ffp FC-DM reticle on a super precision mount. Optic and mount havent been shot with. Has sat on a gun i never even take out of the safe.

Would trade for a plxc with a griffin mil reticle plus cash.

$2400 shipped

I need help determining a rifle's chambering.
My gunsmith did a chamber cast and came up with a case length of 1.775", body diameter of .474" and the bore is .266".

Below are pictures of the chamber and the chamber cast next to a 260 round.

Thank you for your help.

Got a bunch of prep and press equipment I’m moving buyer pays shipping good condition on all

I have around 950 pieces of once fired 6arc brass. Most of it is Hornady and some is Starline. It has all been tumbled and cleaned. I would like some advice as to what this is worth. I am looking to sell off my 6arc reloading stuff and want to ask a fair price for the brass. Thanks for your help

Desert Tech SRS Left Handed Rifle FDE with Monopod DT, comes with left handed 6.5 creedmoore 26" Barrell purchased 2/2021 less than 300 rounds ,Desert Tech SRSA2 308 Win 22" LH Bbl never shot. purchased 10/23. Included THREE 10 Round magazines and THREE 6 round magazines. Desert Tech cleaning/tool kit with torque wrench , Allen set , bore guide( 2) and cleaning items. Also included Extra Torque Wrench, sling, Arca Rail, Saddle Blanket installed and Quiver installed.
Please dont ask to seperate anything all sold as a package. Reason Selling i do not shoot often and i have a couple of Accuracy internationals that i can switch between them and i do not shoot as often as i like to.
Price $4,000.00 shipped from my FFL to your FFL. If i don't reply quickly to you please excuse me and I will reply but it might take a few hours or a day for my reply.

sold

Looking to part ways with a lightly used origin SA.

Details:
Origin SA
26” proof competition contour 6gt 1:7.5
Vision brake
Timney HIT trigger

Full barreled action has 160 rounds of factory ammo down the tube. Just looking to free up space. Prefer to keep entire thing together.

Asking 1500

Kuiu Pro Pants w/ knee pads
Verde camo
Size 40 / “regular” inseam (34)
Brand new, unworn, tags intact

Bought last year and then proceeded to lose a bunch of weight before ever wearing them. These fit pretty well if you’re a 38 that doesn’t prefer nut huggers.

$OLD

2.5- 20x nightforce nx8 mil-c reticle will come with Hawkin rings and mk machining level, pretty much brand new just been mounted, just looking to go a different route


Would be willing to to work out a deal for a Kahles 525i dlr left wind knob

Or asking 1950 shipped for everything

Hello fellow Hide enablers, looking for advice on what to do with a USMC Unertl scope. Always liked the look of the target scopes but never thought I’d get my hands on one.

I have a 15x on a USMC Remington 40x that was scratching the itch… but now?

I kind of like the idea of putting it on a Pre-64 M70 for an early Vietnam clone or do I look for a 1903 to make a WWII clone? What would be your thoughts?

Looking for an amp press for the right price let me know please