Surprised no one’s posted anything about this one yet. A guy broke into the Pennsylvania governor’s mansion with a Molotov he made out of lawnmower gas and Heineken bottles he found on the property and tried to burn the place down with the governor and his family inside.

Supposedly he was also carrying a hammer and was going to beat him if he found him.

https://www.foxnews.com/us/pa-gover...mitted-harboring-hatred-toward-shapiro-police

I know, its been talked to death. But I am still curious.

I have a AR build with a lot of Mk12 flavour, with 18" barrel, rifle lenght gas and an AEM5 suppressor.
So far I have used a standard carbin spring and a H2 buffer.

But last week I got myself a Schmeisser multi wire buffer spring, which is a bit like the Geissele mg42 but with 2 strands of wire and compatible with regular mil-spec type buffers. The multi wire spring is a bit stiffer than the carbin spring. Some say that a stiffer spring with a light buffer is better for function. Others seems to prefer to add weight with a heavier than normal buffer. I did some testing the other day at the range.

I tried the multi wire wring with a carbin buffer, recoil was light but also snappy, at least that is how I would describe it. Ejection pattern was at 14-14:30.

Then I switched over to the H2 buffer and multi wire spring, a bit more recoil was felt but it also felt more controlled, more of a push. Ejection pattern was at 15:00.

What would you run?
I have thought about getting a H3 buffer but I am not sure it is worth the money.
I am not switching to an adjustable gas block.

***SOLD***Selling a NF ATACR 7-35 Mil-C F1. This is a catch and release. Bought from Hide member “1260” and used for one match. Only selling because I have too many scopes! Minor scratches and wear, espically around the eyepiece (pictured). Glass clear. Missing windage cap and objective covers. Selling for PRICE DROP $2100.

Area 419 34mm 1.54” mount with normal height diving board and box - $300

Couldn’t really resist the purchase after examining one. Very few tool marks, and the only polymer part is the bolt shroud, magazine body/rotor, and stock. The Picatinny rail is alloy, apparently with no tilt. The receiver is tubular, with the rear receiver ring the same size as the front so I don’t know right offhand if an existing scope rail will be compatible. Not a Rem.700 footprint, but does have a hanger for 700 clone triggers.
Ruger brand mags fit like a glove, but I haven’t tried feeding live rounds yet. Overall the build quality is definitely there, I just hope the barrel God’s have smiled on me and this example actually groups well. All factory goo has been removed, I’ve greased, oiled, and adjusted, so I’m just waiting to test. I’ve slapped a 1” tube 8-32x44 scope for break-in.

Inletted for Remington SA. Chassis is tungsten grey, comes with carbon buttstock, carbon grip, carbon bag rider, folding adapter and thumb rest.

SOLD shipped or

Trade for a lightweight double pull ckyepod.

Have 2 triggers both new and unused
1 - TT Primary - 150$
2 - Timney Hunter V2 511 - 140$

I had an old EBR-2C i sent in and got this new one for exchange today.
$750 shipped, comes with all the accessories.
Mounted the scope and leveled in rings, will come as pictured…rings level and caps.

Selling my brand new M40A6 with suppressor and scope

Built by GAP
RR prefix action
Schneider barrel
FA 762 SS suppressor
S&B 3-12 USMC scope

Looking for $25,000

Only trades at this time
Accuracy international ELR 50bmg
Rare KAC stuff
Transferables

Great condition, all accessories included in box.

$450 shipped
Zelle for payment

Springfield Emissary 1911 5” 9mm for sale or trade. Was carried for a little while so has some wear on the front of the slide from holstering but functions flawlessly and shoots great. Comes with 2 magazines (if you meet face to face they can come preloaded for you). Asking $900 OBO for it. Willing to ship to an FFL. Trades considered are as follows:
Bushnell Match Pro ED 5-30 mil+ cash
Manners LRH with mini/micro chassis for 700 SA
Nice hunting optics
CZ 457 based rifles or action in 22lr +\- cash on whatever side to make it even.
Too many projects unfinished and this thing is too nice to collect dust in my safe

Black mdt acc elite that is lightly used. Rem700sa and clones. Asking $1350 shipped and insured to your door. I can take more pics if there’s anything else you want to see. Just let me know. Ships in the original box.

PayPal F&F

Badger C1 Cantilever Mount
1.54” Height
34mm scope tube

Complete with:

C1 Accessory Ring Cap
C1 J-Arm
C1 Bubble Level
C1 RMR Plate for J-Arm
C1 CLIF Diving Board

$475

Brand new in box (haven't even opened it yet) SR-15 Lower. I got a couple of these and dont need them.

$XXX Shipped

Would do a trade for the following and can add cash either way:

Impact 737 or Lone Peak Fuzion Titanium RH Short action
ATACR 1-8 MRAD
ATACR 4-16x42 MRAD
S&B 4-16x42 MRAD
Vortex Razor Gen 3 1-10MRAD
Vortex Razor Gen 3 636 MRAD
ZCO 420 or 527 10 mil MPCT1x

Who prefers flat bottom actions like the tc icon or the accuracy international at rifles over the Remington and Winchester style round actions and why?

Hey all! Registration is now open for the first Iowa Quantified Performance match at High Lakes Outdoor Alliance!

The match will take place on April 13. Please review the division criteria on PractiScore to ensure you register for the correct one.

For those not familiar, Quantified Performance is a series of gas gun matches geared towards stretching the performance limits of practical rifles. You can expect 8 stages of positional shooting at targets between 100 and 800 yards.

There will be a prize table from sponsors as well as a catered lunch for all competitors.

We are also looking for some volunteers to help RO the match so if you want to see what QP is all about, consider volunteering!

Hit me with any questions y'all might have!

Up for grabs.. Aero Solus action with Bix n Andy TacSport Pro X 2 stage trigger in a KRG Bravo chassis in Sako green with Minimalist spigot and adjustable trigger guard/mag catch, 2 AIAW mags. 2 barrels in 6 GT. Currently on the action is an 18" Keystone Accuracy barrel I setup to use for suppressed predator hunting. Also comes with a spare lightly used 24" barrel by Straightjacket Armory both are MTU contour, threaded 5/8-24 at the muzzles & 7 twist stainless barrels. Rifle shoots great just don't have time to get out and shoot so someone else should use it & enjoy it. Will include Hornady/GAP die set & approximately 90 pieces of 2x fired Alpha brass and the Solus action wrench as well. Suppressor, muzzle brake, bipod not included.

$1700 OBO shipped for everything above.

Venmo, Cash app, PayPal accepted (will split fees with buyer)

ARC Mausingfield RH LA.
Lapua bolt face
45 moa rail
Has a 300 Norma imp barrel on it that’s at the end of its life. Will pull prior to shipping or you can have it.
900.00

Only trades I’d be interested in would be a SA chassis or stock. RH or LH

Looking for a AAC titan 338 lapua muzzle brake with 3/4-24 threads.

Shoot me a PM or email if you have something or know where I can find one.

I have a Remington 700 chambered in 6.5Creed with a Trident muzzle device and a Savage Small Shank chambered in 6.5Creed. Both are factory take-offs and both are 20”. Zero rounds through the Savage. 20 rounds through the Remington. $80 each shipped or both for $120 shipped.

Green with direct pic mount. Has MCB wrap on the legs, they’re like new underneath.

160$ shipped. Venmo/zelle only.

Trades: Crye g3/4 34X, Stone glacier gaiters L/XL, 1.7 badger c1 34mm, Inforce IR light etc, metal 20rnd mags, 77gr smk’s, rm06, sea to summit poncho, whatever… just hit me.

sold

Daniel Penny was attacked by a lunatic on a subway and defended himself and saved others in the process. His actions resulted in the death of the suspect. The media was painting him as a vigilante.


Karmelo Anthony was sitting in the team tent of the opposing team in Frisco and one of the players, Austin Metcalf told him he was in the wrong tent. So, Karmelo puts his hand in the bag he was carrying and says "put hands on me and find out what happens."

Austin touched him and then grabbed a bit more firmly to move him out of the tent. Karmelo pulled out a knife and stabbed Austin in the heart. He died there, in the stands, in his twin brother's arms.

Today, his bail was reduced to $250K and people were happy about that.

To cap it off, Daniel Penny, who is white, gets labeled a vigilante from protecting himself with his bare hands (arms, actually) from a crazed black attacker.

Karmelo brings a knife to an athletic event and purposely seeks out the team tent of the opposing team and decides to sit there and not move when asked to leave. Karmelo is black and stabs Austin, who is white, and kills him.

Admits it to police, too.

And people are happy that he is released.

My boys wanted me to start loading some bulk 223/5.56 rounds so they can do more shooting with their AR’s.

I put together several loads and tested them at the range yesterday. All functioned fine except the hornady 55 FMJ’s. While they actually gave one of the best groups of the day, they failed to cycle properly. Most would eject and reset trigger but failed to strip next round. This happened with multiple mags. Several would try to strip next round but road over the rim of the case and cartridge was bound up between bolt and chamber. I’m not sure why, as the velocity average was 2905 fps from my 18” 1/7 twist BA 223 Wylde barrel mid length gas, standard gas block and carbine spring/buffer. Any thoughts what the issue might be. All the others functioned fine.

Here are the loads:

Hornady 55 grain FMJ
R-P cases
CCI 41 primers
OAL- 2.204”
Lee Factory crimp in canalure.
TAC 24.5
V= 2905 FPS

SS-109 62 grain FMJ (pulls)
IVI 85 NATO cases
CCI 41 primers
OAL- 2.243”
Lee Factory crimp in canalure.
TAC 24.5
V= 2849 FPS

SMK 77 grain HPBT
R-P cases
CCI 41 primers
OAL- 2.26”
Lee Factory crimp
TAC 22.5
V= 2472 FPS
TAC 22.8
V= 2510
TAC 23.0
V= 2527
TAC 23.2
V= 2560

Hello like the title says I anm eyeing a m99 in .50 and was curious if they are worth a crap or not. I hear mixed reviews that they are not accurate and they are accurate. I am thinking of one for fun, slamming metal targets at 2k yards maybe a random hunt for bear if I feel like doing something stupid. I would like it to hold about a 1-1.5 moa ish group out to distance with factory loads such as the Hornady a-tips.

Does anyone have any pictures or accuracy reviews of a m99?
Thanks !