Any word on when these are coming available? I've got a prairie dog hunt in 2 weeks and would love to try them out!

For sale. Savage 112 with a Black Hole Weaponry barrel in 22-250. Barrel is varmint profile, 1:9 twist, 24 inches long. 300ish rounds down the tube. MDT Oryx chassis. Will include ARCA rail, pic rail on chassis and pic rail on receiver. Bolt has upgraded extracter and ejector. Also includes 2 Magpul AICS mags that are modified to run 22-250. Bipod and scope not included but negotiable.
$1000 shipped.

Brand new Leupold Mk5 7-35 tremor 3

$1750 shipped

Looking to see a SR-5 bipod, my smaller frame isn’t the right fit. Has a few matches on it. Feel free to message for pictures. Looking for 350 shipped to you. Has arca adaptor.

SOLD

Link to the original listing is at the bottom of this page with full details. I bought this off @padom last fall. Shot 100rds thru it over the winter. 263 rds total thru the barrel.

Only selling because my 6.5prc build just got finished, and between that and my 6creed I don’t have much need for this anymore. Barrel is in great shape and shoots awesome. I shot 142smk’s thru it and will share load data if desired. I also have Lapua brass, bullets, and dies available with first option to buyer of the barrel. SOLD shipped takes it, ppff Venmo or Zelle. Thanks.

SOLD

Great shape Atlas 5-H with an Area419 arca clamp, only used a few times. SOLD shipped PayPal F&F or Venmo.

ultimate TracIR package $16000
Utc X
Raptar SES
TracIR and normal cable

This has disturbed reticle etc

Limited Edition numbered Gold Chad Muzzle Brake. 300 ish rounds fired comes in original packaging etc….

$525 shipped

Starting this thread as there is no real data for the 22GT out of there. This will be a culmination of my data and hopefully others data that way we can have sort of a reference of powder choices and charge weights with given bullets, twist rates that work, etc.

This being said I am working with 3x fired OG Alpha 6GT brass necked down in a Whidden FL sizing die with a 0.249” bushing and then running a 0.222” SS expander mandrel through it for 2 thou neck tension.

Going to be running CCI 450’s, H4350, and 95gr SMK’s in a 6.5 twist kreiger barrel. Starting low at 33gr and working up to 35.7gr and will go higher if bullets stay together and speeds are good and lack of pressure. Planning on testing tomorrow through a brake since I don’t want to blow up bullets in my can.

I know folks are running 37gr of H4350 in a 6GT but didn’t want to start too high as this is my first time with a wild cat that has virtually no load data. Hopefully everything goes well and regardless I will be posting results tomorrow after the range day.

Hello I'm thinking to mount an Anschutz rail instead of the actual Picatinny for an budget upgrade of my factory synthetic stock.
This because a majority of the F-class FTR bipod are mostly availlable with Anschutz fitting.

I'm planning to make a pocket on the place of rail mount, but the inner of the forehand are empty, some sort of ribbing are formed for a minimum of rigidity.

A this point your advice for one newbee are to mount an external Anschutz rail screwed and glued with JB weld or make the inner of forehand full of epoxy resin and make an external pocket for the rail?

Thanks

Leica Geovid Pro 10x42 AB+ Binoculars. Small chip in the right eye piece lense. Tried to get a good photo of it. Not noticeable when using them. Box, paperwork, accessories etc…..

$2800 obo plus shipping

Like new acc chassis, has xlr ergo vertical grip, thumb shelf, sap 2 round holder, bag rider and forend weight. $925 shipped SOLD

I have already posted this in another thread but I am putting it up so if someone looks hopefully they see this.


Stay away from the hogs den, Twomanattach or whatever they are calling themselves nowadays

I read several places he did a good job on builds. So I contacted him and we agreed to me trading a Unertl for a build. The build was to include the barrel, log books (which he talks shit on builds without them) all correct markings I want.,clip slot, bedding the stock, and a simrad cap for my mount and any additional stuff to finish the build. We discussed everything and I included a note with the rifle when sent what we had talked about. Rifle is a Six digit action.

After a year of having it I text him and I got that he was waiting on screws for the scope mount he could not get. Ok no big deal. Things are fucked up because of COVID. Get the call rifle is coming back to me. Great news I can’t wait to get my hands on it. Open the case and at first glance I’m happy. Then I notice there is no US stamp above the serial. The I see the barrel is marked PWS and I wanted the RTE-P. Get ahold of him and he complains and says not all rifles are built to spec like the internet say. I tell him I get that is possible but not what we agreed on. He complained and said send it back. Send back Rifle.

Rifle is gone for a few months and I get a text saying hey had to spin a new barrel the PWS would not come all the way out. I say thanks for the update. Rifle comes back. I instantly am disgusted when I open the box. Finish looks like total shit. My short shroud is somehow a long one now and the bolt lift totally sucks now. So I go to cleanup the rifle and where the action and barrel were marked the finish wipes right off. Back down to bare steel. Look closely at the barrel and you can still see PWS lightly under the now marked RTE-P. Get back in contact and was told it was a legit repair and I should be happy. At this point I am fuck this guy even if he would repair it correctly I would not even send it back to him.

So I had LRI fix the bolt lift and cut the shroud down to correct length. They did an excellent job and quickly turned it around. I had touched up the barrel and action with some wipe on black oxide. It drove me crazy because I thought it looked like shit. Raven Rifles hooked me up and redid the black oxide for me and it looked awesome. Once again great guy and turn around was super quick.

Finally get it back together go to the range and shoot it. Fuck found another issue. Should have known better and probably had LRI or Raven look at it but I figured it was fine. There is a ring around the shoulder of the brass. Get the handy dandy bore scope out. Guess what. There is a huge burr in the shoulder of the chamber. It is back out being taken care of.

Oh never got log books or my SIMRAD that was part of the deal either.

Stay far away from the Hogs Den , TMA or whatever the hell they call themselves.

To add more to the story. Just got this from the smith taking care of it.


Joe I got a chance to look over your rifle today. Below or the things I found, does not include the barrel issue.
1. RTE-P stamp stinks
2. U.S. stamp wrong
3. Wrong screws in base.
4. Clipslot for base incorrect.
5. Screw for front of trigger guard broke off or cut to short.
6. Wrong box mag and not welded.
7. Bedding is subpar.
8. Not 100% sure but I don’t think recoil lug has proper modification

Also forgot the first time the rifle was sent back to me it was just thrown in a box with bubble wrap and by the time it got here the barrel was sticking out of the box even though I had sent it in a hard case.

XLR Tikka T3X Element 4.0 Aluminum Chassis with TR-2 Buttstock Short Action Ambidextrous with right hand MPA grip and XLR Thumbrest Rose Gold cerakote and floral engraving. In good condition $650 shipped with a 10 round mag

So I am running a rifle length buffer, with the Armaspec AR10 Stealth Recoil Spring and spacer. I was having problems with it not going all the way into battery or maybe it went in and bounced out!? But I was getting lite primer strikes randomly. I tried a different bolt, same problem. I removed the buffer retainer pin to allow it to put more pressure on the BCG, same problem. I know you can get shims, but the buffer actually sticks out further than the stock buffer, so it shouldn't need shimmed. Any idea what is going on? FYI when I put the stock buffer and flat wire spring into the rifle, it runs like a champ!

Looking for any barrels in good shape.

Thanks

Bought and set up this helmet rig because I had a shit ton of coyotes in my backyard and I have been slaughtering them with a 45-70 on my roof at 2am while drinking God's chosen piss beer PBR.

It's been a great time, but the yotes have now learned not to set foot on my property and I no longer have a use for them more than just an expensive paper weight.

Handpicked Elbit Gen3 White Phos from CNV (no blems)
Team Wendy Bump
Noisefighters ax-14 J Arm
Norotos RHNO II

Super great clarity, legitimately turns night into day. Wendy helmet is extra comfy, comes with a battery pack.

Asking $4,200 for the package. I will only do PP F&F, Venmo, zelle. I have plenty of folk on here who can vouch, I enjoy shooting matches too much to dick someone over 4k. Also my face is in two of these photos so wouldn't be too hard to find me. Maybe for 500k, but 4 ain't worth that kind of headache. Will also include the travel case the tube came in from CNV. Honestly just make an offer. I'm fine with keeping it so it needs to be worth it for me to let it go.

I have for sale a Revic Blr10b LRF binoculars. I bought these from the original owner here on the Hide a several months ago. I have literally not used these at all. I replaced the battery, just because. I set the focus for the image and display and that is it. Fine pair of binoculars, but I'm going to stick with my current LRF and ballistic solver. I just don't have the time to learn a new system. They will be shipped in the pictured Marsupial binocular pouch.

No trades please.

$1,700 shipped.

SOLD

I have almost 9 full boxes of 7mm WSM ammo. One box of the 150gr PowerPoint is missing 7 rounds (the 7pcs of brass are in the box). $375 shipped to the lower 48 or might trade on 6.5PRC, 6mm creed, or 22 creed ammo or possibly brass.

Selling my older but still great slc's. They are the slc neu model 15x56. They come with all yhe original paperwork, soft case, neck strap, cloths, and outdoorsmans tripod stud. They're optically perfect, with no visible damage or imperfections with the glass. Bino body a bit dirty, but I'll clean them up prior to shipping. One small ding on the left eye piece ring, but glass is ok. Will ship for $1375 tyd

I need another support bag, looking for OG Armageddon bag or the Schmedium +1 bag.

Let me know if you have one for sale.

Seen some XTR2s around for a little over 500. To me, a old flagship scope is better than a (insert internet brand superscope).

Is the anything 500-600 that can compete? I’d love to know some other options.

I run one on my 22lr and really enjoy it. Contemplating getting a couple more.

This is some very bad shit,... Mr sun can you save us from our selves?

Looking to sell this Labradar I got in a trade. Everything functions as it should. Includes mics and accessories as well as carry case. Asking $225 shipped

Desert Tech SRS-M2 in 6.5 creedmoor. Less than 100rds fired. Fantastic trigger in this one. Perfect condition. Torque wrench for barrel changes included.

$4500 shipped- chassis, 26” 6.5 conversion kit, torque wrench.
$3500 shipped- chassis only
(scope, mount & bipod not included in price but can work a package deal)

Will meet FTF near the Austin, Houston, Corpus, San Antonio areas