Selling my Giraud Case Annealer- Comes with .223, .308. magnum case wheels.

$450 (Buyer pays shipping)
PayPal FF you pay additional fees if you use G&S

PM if interested

Well taken care of ATAC-R 4-20x50 MOAR reticle, will come with the box and scope caps, I will be keeping the rings and the level. Asking $2,400 or willing to trade for other high end scopes in mill (Nightforce, Zco, Khales, etc.)

I saw an "All Ackey" thread, but nothing specific to just the 223AI.

Fire Forming load
LC Brass - 1x fired and prepped to FF
CCI 450
IMR8208XBR @ 24.0gn
Berger 80.5gn seated at 2.485" COAL
22" 7 twist Rock Creek #4
Defiance Deviant
Jon Beanland built
5x @ 100yds measured 0.2455" CTC

Why wait months for a custom rifle when you can have this meticulously crafted, top rated masterpiece right now? Built by a true firearms aficionado for fellow enthusiasts, this modular kit offers the ultimate blend of precision and versatility, perfect for both competitive matches and hunting adventures. The 6.5 PRC, the big brother to the 6.5 Creedmoor, delivers enhanced power and performance. Skip the wait and dive straight into action with a super sniper rifle that's ready to perform straight out of the box. Designed for the discerning shooter, this rifle is your ticket to unmatched accuracy and reliability. Get ready to experience the best of both worlds!



Gunsmith:

• DMR LLC – Las Vegas Long Range Rifles

Action:

• Fuzion Ti RH SA Magnum, Alpine Port, Nitrided Bolt, Knurled Knob

Barrel:

• PROOF RESEARCH; CARBON FIBER; 6.5 PRC; 24" LENGTH; 1:7.5 TWIST; 5/8-24 THREAD
• Suppressor not included

Trigger:

• TRIGGERTECH DIAMOND; FLAT; NO BOLT RELEASE; RIGHT HANDED

Chassis:

• Element 4.0 Magnesium Chassis
• Color Finish: Cerakote H-265 Flat Dark Earth
• Tactical Revision 2 Buttstock (F/S)
• Ergo Tactical Deluxe Grip
• XLR Push Button Folder (Installed)
• Smoke Ultralight Carbon Fiber Buttstock
• Quick Adjust 2" Barricade Stop
• Set of 2 M-LOK Side Weights
• Element 3.0 Internal Forend Weight Kit
• XLR Adjustable Thumb Rest
• M-LOK Quick-Detach Sling Adaptor
• TR-2 Main Weights
• Buffer Tube Steel Weights (Set of 4)
• Tactical Buttstock Series Bag Rider

Magazines:

• 300 WSM/SAUM AICS 3RD Box Magazine (Set of 2)
• 300 WSM/SAUM AICS 7RD Box Magazine (Set of 3)

Optics:

• Vortex Optics Razor HD LHT 4.5-22x50 First Focal Plane Riflescope - XLR-2 Reticle (MRAD)
• Vortex Optics Precision Matched Rings 30mm
• Vortex Optics Defender Flip Cap - Eyepiece
• Vortex Optics Defender Flip Cap - Objective Lens

Servicing Equipment:

• Fix It Sticks Long Range Gun Maintenance Kit with All-in-One Torque Driver & Deluxe Carrying Case
• Shooter's Choice 10cc Syringe Synthetic All Weather High Tech Grease
• HOPPE'S No. 9 Lubricating Oil
• Bore Tech Cu+2 Copper Remover
• Tipton Universal Bore Guide
• Pro-Shot Chamber Brush
• Pro-Shot Bore Brush for Tactical Kit
• Pro-Shot Trace Eraser
• Pro-Shot Caliber Patches
• Microfiber Cleaning Cloths

Ammunition:

• NORMA Whitetail 6,5 PRC 140gr (120 rounds)

Extras:

• PSR ATLAS Bipod with ADM-170-S
• Area 419 ARCALOCK Clamp
• Tactical Operations 51" Large Drag Bag

Shipping and Handling:

• Will ship to your FFL of choice.
• Buyer pays for shipping.
• Must provide your receiving FFL's contact information.

Pricing:

• $9,500.00 or best offer $9,000.00 or best offer $8,500.00 or best offer
• Suppressor not included
• Preferred escrow with GunTab

I am looking for an inexpensive shot timer for PRS training. Need something very simple - time for 10 shot string for each shot. Seeing timers at the $300 point but not cheaper. Is there something out there that I am missing?

I'm reloading some of these Hornady 105gn BTHP 6mm Creedmoor bullets in brand new Aphpa Brass. All brass was prepped. Using the L.E. Micrometer seating die with a K&M arbor press. Also using the L.E. Wilson expanding mandrel. Neck tension at .001. When seating these bullets I am getting an indent around the tip of the bullet. Called Wilson and the recommended I use the VLD stem. So I ordered one and swapped out the standard stem for the VLD stem. Same thing is happening putting a deep ring around the tip of the bullet when seating. Called Wilson back and they told me to send in the stem with a couple bullets and they are going to mod the stem to the bullet under warranty. The tech I spoke with says he does this quite often with the VLD stem. It's funny because I had also reloaded some with the Barnes Match Burner 105gn BTHP with the standard stem and I'm not having this issue with the Barnes bullets. I thought that it might just be the powder charge of 39.6gn of H4350 being compressed but I'm at the low end of the scale.

Has anyone ever had any issues like this and what was the result?

My wife gave me the go ahead to build a PRS rifle so I can’t afford to screw this up lol. This is going to be a buy once cry once scenario. I saw the Spuhr SICS in person at Mile High and really liked it so I feel pretty confident about using that for the chassis. The ACC Elite would be the other option I would consider.

The big question I have is what action to use? The three that interest me are the CDG, 737r or Fuzion. I currently reload for 6.5 Creedmor and plan to stick with it or another .308 bolt face cartridge for the foreseeable future. I will definitely be using a trigger tech diamond. Not married to the idea but would like to use AW magazines. I’m also planning to use mostly prefits. All that considered what are your thoughts?

WTS: Dillon 550 Conversions, 38/357 $60 shipped
Throwing in an extra #3 shellplate as well, that I have random, laying around

Looking to sell my Leica spotting scope. This is a 65mm straight body with 25-50 eyepiece. I bought it brand new and it has lived in a pelican case it’s whole life. I only use when instructing rifle classes for calling hits on paper. I have never touched the glass and it has been babied. Not a mark on the body or the glass. Only selling to go angled so students can use it easier. Fantastic clarity and brightness.

$2200 shipped to CONUS. Zelle, check or money order.

So I just received my pulse, and it is not what I expected. I expected a nice, diffused display as I have seen in several photos. I received what you see in the pic. Others have this?

Selling 780rds of Sig .300 Blackout. 220gr subsonic.

Price is 80 cents per round, with a 200 round minimum. 75 cents a round if you buy all 780rds. Will ship to your door at cost. Payment via PP F&F with no comments or CashApp.

1.15” height. Comes with center bubble level. Asking $125 shipped to you.

All once fired in bolt gun from berger factory ammo. Cases have been annealed on an amp, sized, and primer pockets cleaned. Dont have the bolt gun anymore and refuse to run these throught the gasgun. $200 Shipped with Cableas 50 round case boxes.

Trades:
500-105 Berger hybrid
500-109 Berger hybrid
500-131 smk
500-134 eldm
500-168 eldm
600-75 eldm
500-77 smk
6.5 Creed SRP lapua
25x47 alpha

I Have had my Impact 4000 for about a year now. Overall I'm happy with the product. Recently I took the unit out for some training in winter conditions. 15 degrees F, light snow cover. Noticed almost immediately that battery life MAX was about 15 minutes, no backlight use. Also, when the laser was fired, the screen would go blank momentarily before turning back on and displaying the range. Once the Low Battery icon flashed the consistency/accuracy of the target ranges became very suspect and unreliable.

Has anyone else experienced these issues, or used their impact in very cold weather? I also understand that this is a CIVILIAN range finder and expectation of performance needs to be evaluated in extreme environments. That being said, up here in the northeast its very cold for months on end and I'd like to understand the capabilities of this unit.

Does anyone have experience using a higher end unit (MARS, Wilcox) in cold conditions and do those units perform similar?

Also for reference, I was using energizer lithium CR123A batteries that had been checked beforehand. The same batteries lasted all day in my Vectronix Terrapin/Kestrel. Thanks for any feedback!

Still in the wrapper, details in pictures below.
575$ shipped in lower 48

Fellow Hide Members,

Sadly the time has come for me to start thinning the heard.

I have a Minox 5-25’s with the MR 4 reticle that I would like to sell. It is the white boxes version.

It is practically brand new. It’s been to the range probably 5 times as it sits on my back up rifle. I’ll take $2250 for it. (On the foundation stock in the pics)

It has been wrapped their whole life’s.

I will sell the rings/mount for extra if needed.

The price’s is shipped, but add $40 for insurance is on you if you want it.

Payment by PayPal (F&F only), Zelle, Venmo, Apple Pay, or good ole snail mail.

Here are some trades I would consider:

2011 9mm pistol

Springfield xd xdm (9mm)
Berger 7mm 180 gr hybrid’s
Berger 7mm 175 elite hunter
7mm Carbon blanks 22” or 24”
H1000
Rl26
30 foot’ish toyhauler

Thanks,
Jay

I figured there’s not a picture thread of REM 700 AICS builds so I’ll start one. Please add you AICS builds pictures here!

NIB never mounted
3.6-18 Tremor 3 FDE

$1500 shipped and insured.

No trades.

Thank you

NIB never mounted
5-25 Tremor 3 BLK

$1600 shipped and insured.

Box has some damage. Otherwise there are not other blems.

No trades.

Thank you

I have a left hand Foundation MG2. Comes with Foundation full length Arca rail, Hawkins M5 DBM, Weibad cheek pad, and full Tungsten weight kit. This was originally inletted for a Vudoo but has since been made to fit a Deviant Defiance. I will not separate this kit unless the stock sells first. Only trades would be an MCS-TCS or a Greyboe Phoenix 2 SA.

Asking $1200 shipped.

I have the CMMG 22 conversion kit for that AR-15 and I'm looking for an AR-15 barrel chambered for .223 with a 1:16 or 1:14 twist.
Does it exist?

6.5 PRC only



Just starting a load work up. I need your favorite accuracy loads.

Please provide:

long or short action

Bullet weight and Mfg.
Powder and charge in grains
Cartridge OAL, yes OAL. If you want to include ogive list the comparator used.
Primer
Brass Mfg.
Velocity
Barrel length
Freebore of your chamber if known

Comments on function, brass life, accuracy, temp stability.

Today I ran 50 fire forming loads for new ADG brass. The idea was to use up bullets and powder I don't like while fire forming.

Short action Mausingfield M7
Win. Staball 6.5
54.5 gr x 35
Norma Golden Target 130gr Advertised G1 .610 (I plugged in .585 to Strelok Pro) hit centered at 500.
Seated for max mag length 2.960 This shot the best @ .875" for 5 avg speed 3090
Seated 5 @ 2.947
Seated 5 @ 2.935
avg speed 3090
checked several five round groups for velocity out of the car rounds were cool 1st group avg 3090 SD 9.5, then 3115 SD 22, then 3085 SD16.2. Temp stability seems pretty good.
New ADG brass. Chamfer od/id & mandrel with .2625
CCI #34
26" Helix 6/ 8T Braked
9lb gun

3 x 5 round ladders with Berger 144 LRHT seated for max mag 2.960
Vit N565
57.4 = 2942 SD 11.2 1.1"
57.9 = 2972 SD 13.9 .875"
58.4 + 2997 SD 19.3 1.3"

I'll be loading the 156 eol in this fire formed brass with N565 next.

I have an Athlon Chronus BTR 4.5-29x56 MOA reticle scope, with rings, for sale.
It was mounted on my 6.5 CM precision rifle and shot accurately out to 1240 yds.
It is in excellent condition with just a few minor use marks.
I am selling it because I have started shooting precision long range more and have decided to move to a MIL based scope.
This is an excellent scope that will serve you well if you shoot MOA.
I do not have the original box.
Price is $750 shipped, if needed.

Selling a CMMG Banshee in 40 S&W. Excellent condition. Low round count. Comes with 2- 24 round Glock mags and 4- 15 round Glock mags. Ammo available for sale separately. Optic not included. $950 shipped.