Looking for some used or new dasher brass. Would be interested in a set of dies also

Wtb; flat Diamond w/o bolt release.
Thanks.

McMillan A-3 Adjustable including arca rail. R700 / Origin. Short action. M5 dbm. Carbon fill. 3lbs 2oz with rail. All LOP spacers. Never bedded and was very accurate without.

Small chip in paint on RH grip and RH fore end. Opened ejection port to fit Origin. Originally a Sendero inlet, opened for M24, will fit MTU but tighter. Added one c-bore to add the fastener to the back of the arca rail without using the action screws.

New never used Arc mount. 36mm 32mm high 20 moa. $175 shipped.

MDT Elite grip in black
Model 105032-BLK
Checked fitment on a chassis, then removed. It's never left the house.

70 shipped via venmo, zelle or PPFF with no comments
I will not PM first

Clearing out space and since my nrl hunter build is wrapping up I don’t need this guy anymore. Bergara b14 6.5creedmore with carbon barrel. Has 3-400 rounds through it and shoots great. Only thing is it’s a 22” barrel so it’s right there on the boarder for nrl hunter power factor so I built a full custom with a 24” barrel. Great hunting rifle or one to dip your toes into the long range game.
$1100 shipped to your FFL.
Scope (Burris XTR 3 5.5-30 illuminated) is not included but can be added for $900View attachment 8660096View attachment IMG_6039.jpegView attachment IMG_6041.jpeg

Used, but still in good condition with warranty sticker intact

240 shipped via venmo, zelle or PPFF with no comments

Eberlestock Lowdrag in coyote

$225 shipped

Ulfhednar Tripod With Carry Bag

$350 Shipped

Like new
MK 5 windage
Gold
$100 shipped
PayPal friends

Looking for a M30 AI AXSR 300 PRC barrel. Dark earth is a plus, but anything would work assuming low/no round count.

I have a nice Geissele High Speed 2 Stage National Match Trigger up for grabs. Less than 400 rounds on it and it has the Match Spring Set installed.

Only $150 shipped.

Eotech G45 in excellent condition. Asking $475 shipped.

I have a like new timney Impact Remington 700 Trigger

Asking $75 shipped

Please PM me only about your Orange Vise with asking price and if the Area419 Maintenance and Barrel Change Jaw Kit is included or not.

I’m willing to pay for shipping.

Only dealing with well established members. Thank you.

Couple things up on the chopping block.

All prices include UPS shipping. Venmo or PP F&F are accepted.


1. Vortex Razor HD Gen III 6-36x 56. This is new in the box $2400 shipped





2. Vortex Impact 4000. This is new in the unopened box. $1350

3. Nightforce 5-25 ATACR. Lightly used. Does have light ring marks from Sphur mount $2400

4. Hawkins 34mm mount. Mounted once, never taken to range $250

5. RRS AXMC ARCA adapter. Some light handling marks. Includes hardware (blue painters tape is holding in hardware) $85

6. Sphur SP-4002 34mm mount. Used with ATACR above. $275

7. Accu-shot BK12 Monopod $75

Not looking to build this soon, but want to see what my options are:

Looking to use 130-150gr bullets, not strictly a target / paper puncher. Would prefer ability to use whatever poly and metal large frame mags (shorter COAL). 20" barrel. Will probably want a 0.75" gas block to keep weight reasonable if carrying.

Precision:
Before I figure anything else out, I want to see if platform will be "precise enough" - assuming build / parts are good and I can shoot a (precision large frame) gas gun properly, what size groups can I realistically expect from Tipped GameKings, Hornady Interlock, and various Speer offerings in this weight range? Am I realistically looking at < ~2-3 MOA 10 shot groups?
150gr SMK for target shooting - can I still realistically expect ~1-1.5 MOA 10 shot groups?

Feeding / reliability:
Most importantly - Does case geometry of any particular cartridge in this class allow for inherently better feeding?
Is one going to be easier to sort out with the gas system, buffer, spring rate / length, bolt carrier, etc.

Brass:
I see 7mm-08 brass is usually commercially available. How time consuming is it to form 7mm-08 brass from 308 if I really need to?
I see that WTO says that 7 SAW can be formed from 308 with just a full length resize (i.e. 1 step) - looks like it's just necking down and pushing the shoulder down a bit and to 30 deg from 308. Anyone experience otherwise?
7cm hasn't been standardized, but are most chambers cut for 6.5cm brass that has had a 7mm mandrel run through it (maybe with the neck shoulder junction back a tiny bit?)

Velocity and powders:
Looks like these have similar velocities. WTO states that 6.5x47L powders work well for 7 SAW. Is one easier to load for overall? Is one going to be very compressed with a popular powder and polymer mags?

For sale is an excellent condition P30L (DA/SA no safety) purchased directly from LTT. 200 rounds fired.

Has the original box and papers
Comes with original trigger and trigger assembly
Comes with Landgon Trigger Job and the GG flat trigger and 12# SRT
2 17 Round mags
1 20 round mag
Comes with Trijicon HD XR tritium sights with yellow front
Comes with Gray Man Solutions Shadow AWIB holster ($130)
Comes with Fury Carry Solutions Range Holster with Safariland Fork ($75)
HOLSTERS NO LONGER AVAILABLE

Asking $750 shipped OBO from me to your FFL. If your FFL requires from an FFL add $50 to the price

Let me first off start by saying I am done with this clone building shit. Especially when the original company can not even make a correct clone.

IBA has been a complete shit show to deal with. You will not get a clone correct rifle if you send them a build.

1. They tried marking the scope base incorrectly with the serial and XM3. I called them on it and they said I had no clue what I was talking about . Luckily they replaced it for free.
2. They US stamped the receiver. We discussed them tig welding up the US and making it correct. Well I guess they don’t care because it still has the US stamp on the receiver
3. I wanted the barrel to be marked like the original. Fuck they can’t even stamp the God damn barrel correct. It’s supposed to have H-IBA 308 and last four of serial other side is supposed to have P XM-3. Well the one side has P T. And the other has
IBA H 1-10 308 and my last four.
4. Clip slot thumb relief is completely incorrect
5. No weapons book like promised
6. They are very unfriendly. Told me there was no pleasing me. Well I wanted it and explained I wanted it clone correct to the original ones.

“ IBA” Iron Brigade Armory did not build a clone correct rifle for me like we discussed being done for me.
I would not be upset if it was not discussed up front I wanted an exact copy of the XM3 I even caught during the build that they US stamped the receiver and was told it would be taken care of.

I guess it’s off to a trusted shop to get the fucked up shit fixed

Arken EP5 5-25 for sale. Only used in two matches. Still in great condition and works great. Has mil VPR reticle.

Also comes with original box, sunshade, and rubber bikini cover.

400 shipped.

1. ZCO 840 - SOLD
- MPCT1X reticle
- 10 Mil turret
- NLE

2. Swaro EL Rangę TA
- 10x42
- TA version with ballistics
- Green

New, never used
this was my back up pair, upgraded to the 12x, so dont need these anymore

Use code SH10 for a deal

So I just bought a nice Trijicon Credo 1-6x24 FFP Mil Red, all of 19 oz of it. And I got it for a steal of a deal. That aside, I knew I need some new 1 piece mounts that didn't weigh a ton, so I let my fingers do the walking in the digital marketplace.

And while shopping my angst was aroused by many a well known purveyor's of said mounts. Why?? Because many simply do not list the weight of their creations. I mean like come on. Weight or lack thereof is immensely important in cobbling together a good scope and mount combination. The prices are easy enough to find, but weight seems mysteriously absent in many cases.

I first went to Trijicon since mating a scope with the makers own mounts seemed like a good idea at first. Well not so good. Trijicon's 1.59" High Cantilevered Mount caught my eye. They gave spec's on everything, except the weight.

Moving on to Nightforce, they had a nice X-Treme Duty 30mm 1.54" 0 MOA Ultramount #A699. But the weight of the dang thing is apparently a military secret as it is nowhere listed.

Badger Ordnance Badger Ordnance 30mm One-Piece 1.54" Condition One Modular 0 MOA I finally found (6.5 oz) only by going to Badger's own website. And they are priced north of $300 green backs, which is a bit spendy for a sub-1K$ lpvo like the Credo.

Rather than bore you with further travails down my personnel rabbit hole, I think you get my point. Scope base makers, especially those that charge well north of $200. semoleon's should put their weight of their product front and center everywhere they are sold. I shouldn't have to go to multiple places just to find out.

Anyway, in the end, I went with an old standby Primary Arms PLx 30mm Cantilever Mount - 1.5". About $212. bucks for a 5.9 oz mount, before tax & shipping, with my GI discount.

Primary Arms 30mm PLx Cantilever Mount - 1.5"

I have killed 8 this year on our 80 acres and 3 of them had mange and looked pretty rough. I put a 20” 204 barrel on my ar and really like it. I use a thermal and judging exact distance is hard. The 204 flat trajectory helps a lot. And the accuracy and low recoil helps a lot too. I had a ba 1:7 18” barrel before. I like the 204 much better and I don’t miss as many now.