For sale

Eotech vudu 5-25 MD3 FFP reticle illuminated
No box
Comes with Steiner lightweight rings

$1200 shipped no trades

Hey. I hate that I have already sent the rifle off without getting to try my Griffin PSR can I had BSD Fabrication jail break for me to us with the CA762SSAL/RE flash hider. He used one of his warlock mounts which uses an 1.375 x 24 thread and I am sure if you wanted him he does the warden conversions and could use it. Only thing we did was put a tiny pin on the underside of the flash hider so it locks into the grove that a new style SureFire would use. It’s barely noticeable. Once again I wish I had a picture before it left to get a little repair work done.

I just wanted to share he did a real nice job was easy to deal with and did a good job of keeping me updated and did not mind me asking questions. I just wanted to share in case someone was looking for away to get a suppressor for their older style mount. I will give a complete update when the rifle comes home and I get to go shoot it. But here’s a few pictures.

It will need to be Cerakoted once I get it tested. Or I’ll just buy a mirage cover and won’t care because it will be covered up.

I am parting with one of my rch Belgium Scar 17’s. This gun has 300-400 rounds through it. I am the second owner and have only put a few mags through it. I have several and I just do not get out and use them very often, so I am getting rid of one. It is all stock. Please message with any questions. Only trade I would consider is towards an mlok Barrett MRAD. $2550 ***SOLD***

Hello!

Looking for recommendations for a cheek pad that would compliment my AI AT-X. I do not find the stock one comfortable.

Thanks!~

Lot of 6 Magpul SR25 20 rd magazines in like new condition with no issues.

SOLD

You can text me at 434 738 8647 with questions if that is easier.

Thanks

Very nice, like new, Vortex Razor Gen 3 6-36X56 MOA. Excellent condition with everything included form Vortex including box. $2200 shipped. phone call/FaceTime is a non issue. Any questions just ask. Thanks.

Hello to all,

I was wondering if anyone has done business with this company https://21stcenturyinnovation.com/, have you purchased anything from them?

I ran their site on a website validator and it gives back 61.5% that they are legit.

Thank you, Steve

Up for sale, an excellent condition CZ Accu Shadow 2 9mm with 3x 17 round magazines. This has been a safe queen for a while now and I'm just looking to downsize in some areas. It has maybe 200 rounds through it and it's overall condition is excellent, could almost be considered like new. It will come with original hard case and everything it came with from the factory. All state and local laws apply (17 round mags).





Looking to get $1800 shipped to your FFL, insurance is on the buyer. No trades at this time

PayPal F&F preferred with NO COMMENTS.

PM with any question or for additional pictures.

CM

Excellent condition Gray Ops CNC Precision Scope Mount in 34mm, 1.26” height, 0 MOA w/ Precision Diving Board. Was mounted once and went to the range 2-3 times. The precision diving board replaces the front cap and is all one piece.

You’ll notice there are actually 3 regular ring caps, this is because one of the accessory mounting holes at 12 o’clock was stripped so Matt & Dave promptly sent me a replacement. All the components are serialized, so due to this, the serial # on one of the caps doesn’t match. I really don’t think this matters because of how precisely these are manufactured, plus the precision diving board is included.

$380 shipped CONUS, Zelle or PayPal. No trades. Please PM with any questions or if you’d like to talk/text/FaceTime. Thanks!

Specs:

• 34mm tube diameter
• 1.26” / 32mm height
• 0 MOA cant
• Weighs 10oz w/ precision diving board
• Precision diving board picatinny rail is 3.8” long
• 4.85” total length (rail space)
• Each ring is 1.145” wide
• Space between rings is 2.55”
• All fasteners are T25 Torx (the T25 bit they include normally is not included)

Brand new Badger retro USMC mount, base and rings, 6-48 screws —- 69B version for alphanumeric serial number rifles. No longer in production.

$195 shipped
**SOLD**

I have 1x box of 20 rds available.

2,100 1,300 pieces of once fired Hornady 6 Creedmoor brass. Large rifle primer. Fired in a Proof prefit chamber. Will sell in quantities of 200 or more.

$70 per 200 cases, shipped

In good condition, glass is excellent. I took a picture of every blemish I could find on the scope, didn’t find any on the glass, lumina caps have been on since day 1.

Scope with Caps $1800. If you want the ARC rings add $140.

Salmon river solutions ti 5 port, self timer, .990, 6.5 cal

Sold shipped PayPal or Venmo

No trade

Looking to sell a Panther Arms DPMS LR-308. Has been a safe queen mostly with a low round count. Not sure of actual count. Has a few marks on picatinny from mounting optic and one up and the end of the free floating rail (shown in photos). This is the billet upper and lower receiver with factory Odin Works free floating handguard/ rail. 16” barrel. Has the forward assist. Very clean. Has a Windham weaponry butt stock with built in adjustable monopod. Comes with the one magazine pictured

$1000 shipped to your FFL of choice.

Zelle preferred. But accept most pay methods. PayPal F&F unless you pay fee

For Sale:
Friend used on 1 hawg hunt.

$1700
Venmo or PP F&F

Features of ATN ThOR-HD 2.5-25x 50 mm Thermal Imaging Rifle Scopes:
Thermal Vision
Obsidian Core & UI
Ballistic Calculator
Recoil Activated Video (RAV)
Profile Manager
Smart Rangefinder
Video Recording
Smart HD Channel
E-Barometer
Gyroscope
E-Compass
Bluetooth & WiFi Capabilities

SOLD
New old stock Badger USMC 34mm rings. $160 shipped or possible trade for a quality 34mm cantilever mount, medium height.
SOLD

Leupold Gold Ring 12-40x60 spotting scope, non-retical. Includes ARD and cap, cover. Clean and nice condition, haven't used it much.
$900 shipped
Will consider trades/part trade.
looking for 34mm cantilever mount,

Price point is capped in the $2000k range. I thought I was going to go with a Rix L3, but have stumbled upon the Athlon ATS models which offer better specs at the price point. At least as for as the sensor and objective size IE the L3 at $2599 is a 35mm 384 and the ATS-50 $1799 (@EO) is a 50mm 400-300 I’ve tried searching with some results for the L3 but very little info on the Athlon.
What I’m I missing between the two and what else should I be looking at.

I have 42 acres but most is wooded. My longest clear shot is 365 yards and coyotes are my target. I know I’m on the low end price wise so I’m sure written specs may not tell the story.
$2500 is the real max but I’d prefer to stay lower.
I’ve never even looked through a thermal scope so the lack of reference may be a good thing. I know once you look through a top tier optic it ruins the rest.

All new, prices include shipping/insurance
Open to offers, no trades please

Cool Beans Knives
80CRV2/15N20 Steels
Stabilized Curly Walnut Handles
3" Cleaver w/ sheath and walnut cutting board - $300
4.5" Sanmai Hunter with belt sheath - $400













***SOLD***Beaver Bill Forging Works tomahawk
1750 English Pipe Hawk with belth sheath
17" Solid curly ash handle, 2.5" forged carbon bit cutting edge
$400***SOLD***

I’m new to using quickload but not new to this load. My chrono has a velocity of 2910 with these parameters and QL has me at 2808. I’ve verified this load out to 1 mile. Can anyone identify what I may have screwed up or need to adjust? I am shooting suppressed but that wouldn’t add 100fps.
24” Barrel
RL26
Berger 215g Hybrid Target
Measured ADG fired brass for H2O
COAL 3.676”

Brand new 6.5cm starline brass. All brass is in bags of 100 unopened. Large rifle primer pocket. $50 per hundred. Shipping is actual cost. Please let me know and I can get pictures or info. I have approx 6-7 bags available.

I have plenty of 300wm brass for sale. All mixed head stamps but could look to separate if needed. I have brass and nickel case. Most is all reprinted and tumbled ready to load. Please let me know if interested and I can get pictures and info. $50 per hundred. Shipping will be actual cost. All brass is once fired

Selling a manners TCS stocks, r700 short action, right hand with sikes rail on left side. It has a 360 precision steel arca rails with r-lok, and it has a neoprene pad on the cheek riser.

custom painted with gloss finish

in great shape, they do not come with clutchs for the sikes rail.

Looking for $1050 shipped payment via paypal f&f

Sold!


Would trade for mpa vanquish or matrix pro 2

SOLD!! Hate to do this as I’ve just got it all together but unforeseen circumstances and all that….

Rifle and 6c barrel have less than 500 rounds; I also have a 6.5c barrel and a 308 barrel both in similar condition. I can’t remember the details of both but will do my best to track it down in my texts/emails from sellers here on the site.
Comes with custom fit Pelican Case, 1 brown mag and 2 black. 1 QD cup pic rail piece, HRD Gear and RRS BAX ARCA rails, TBAC Muzzle break.

Package price is $6,200 shipped CONUS. I’ve no interest in separating anything at this point. I will take more pictures tomorrow or maybe later today if it’s possible to get off work early.

Edit: pic file is too big and unsure how to correct. Happy to send via text or email. PM me.