Title says it all. If you have one and are willing to part with it, please PM me.

I appreciate it!

$35 per

Earth Folk,

Over the years, many people have asked me to design a cantilever scope mount optimized for AR-15 platforms. We'll I finally got around to it and here it is. We're calling it the AIR BRACE because the emphasis is on ultra-light weight while trying to keep the cantilever as stiff and strong as possible. The 30mm diameter x 38mm high mount weighs in at 4 ounces making it among the lightest in the industry, especially if one actually cares about the stiffness of the cantilever section. The mount also includes a level vial at the aft end that is back-lit through a hole that runs through the entire length of it, however, it is likely useful only for the young or those older folks lucky enough to see clearly up close. I used to be young.

Note that the images below are renderings. I'll post a picture of the real thing on a rifle soon. Torque values are 35 and 55 lb-in for the scope and rail respectively. I decided to go with one M4x0.7 screw for each scope clamp because it can handle torque in excess of 40 lb-in. Bear in mind that most mounts have at least two screws per side per ring to which 15-20 lb-in of torque is typically applied. Since we're doing the same job with one screw, twice as much torque must be applied, about 35 lb-in, to result in similar clamping force.

Should a two-screw version of the scope ring ever be required, we can easily and quickly introduced retrofit-able caps but I doubt that will be necessary. I used the AIR BRACE to hold a Schmidt & Bender 5-25x56 PM II on top of an old 10.2 lb Sako TRG-42 through which I put about 100 rounds of 338 LM. The experience was generally unpleasant because I really don't like recoil, but the AIR BRACE did its job maintaining and returning to zero. That said, our M-BRACE rings and mount are better choices for big stuff.

We're pricing the AIR BRACE at $349 but, since tomorrow is Black Friday, we're offering it at $279 though Monday.

Enjoy and have a happy Thanksgiving.


Ted

I have 9 bags of 100ct once fired Hornady 6creedmoor brass for sale. It is not cleaned or anything. Asking $55 (OBO) shipped per bag of 100. Or the whole lot for $450 shipped. Zelle, Venmo or PayPal F&F.

Can anyone recommend a good decently priced soft case that will fit a fixed stock AR-10 with a 20" barrel and large scope? All mine won't even fit a 15 and 18" barrel.

I have a Riflespeed gas block with the mid length tube. It is a .750 block. This is the RS7536 model. It worked great and it is super easy to adjust.
$125 shipped
No trades please

I have a Craddock RTR 13.9 223 Wylde fluted barrel. It is a 1/7 twist with a mid length gas system. I have around 150 rounds on it and it was extremely accurate. Consistent sub moa 5 shot groups. Most groups with 77 otm ammo were closer to 1/2" to 3/4".
$300 shipped
No trades please

New in box Athlon Ares BTR Gen 3 HD 2.5-15x50 APRS13 FFP MIL. Opened never mounted just didn't end up needing it.

Asking $575 shipped and insured. Payment through discreet paypal FF, venmo, zelle, or cashapp.

I have 233 confirmed trades on Reddit GAFS username AlternativeStation29. This is crossposted.

Brand new, 7 boxes.

$200 shipped.

Over 300 officers, incuding U.S. Postal Inspectors were involved.

Modelo sales suspected to drop even further.

Login to view embedded media
Login to view embedded media

(2) Sig Sauer Sniper Data Books w/ Tactical Notebook Covers. Includes the binding rings and numerous extra pages. For information its got everything from the academic portion of Sig Sauers Precision Long Range Course and then additional information that aids in ranging/other field skills associated with the role of a sniper.

These were made by THULS on tear resistant, waterproof / almost bomb proof pages. Much stronger and more durable than write in the rain. Use map pens to write on them and alcohol lens wipes to erase (reusable) or just use a pencil.

Both for $250.00 shipped USPS Priority
Individually $135.00 each shipped USPS Priority

PayPal friends and family with no note

Used but works comes with mount



Got this in a trade do not need it

175 shipped

Trijicon Credo 4-16x50 MRAD & SFP. This scope has a great reticle, glass and illumination. Perfect for a hunting setup, and a model that's hard to find. Currently sitting in a set of Seekins Precision rings (low).

I have a very gently used ThunderBeast Dominus-CB .30 cal suppressor that I’d like to sell or possibly trade. A recently discontinued, but awesome can that is great choice for a "one and done". I have other suppressors that I use more and need to slim down the collection. I am located in Georgia and have all ATF paperwork ready to transfer. I also have a 5/8x24 non-timed brake for it. SOLD 5/11/2025

Die comes with .266 bushing and mandrel die. Asking $140 shipped for the set. Pp ff,venmo,zelle

Vanquish PMR Rifle​

- Black Vanquish Chasis
- 2024 December
- MPA Elite Action aka Coup De Grace from American Rifle Company
- MPA 25 CM Creedmoor barrel 200 rounds through it
- Glass and bipod are not included.

I will consider splitting up if barreled action sells first.

$2600 shipped or make an offer

Diamond AR Pro Curve
sold

Geissele Hi-Speed NM match rifle trigger
Have the spring kit for it also
$200 shipped

Hi-Speed National Match - Trigger Set Specification​

SP-3601 (30mm / 1.18" high)

Mounted on a 22 and never used. Includes box, paperwork, and wedge

$300 shipped

NIB, only opened for pictures;

Vortex Razor Gen 3
1-10x24
EBR-9 BDC
MOA

$1750 shipped & Insured

I have an early Savage .338LM FCP that saw a lot of use 6-10 years ago, but sat out unloved for the last few years. Today I decided to take it out and clean it up. A cursory visual down the barrel showed something about half way down, so to clean out the dust (and apparently also copper corrosion) I wet a patch and ran it through.

Now I kid you not, this was not a staged photo nor a fake. This was actually in the bore. And I did not put it in there. This is how the patch came out.

nvm. keeping it

Zero Compromise Optic ZC840 8-40x56 Riflescope MPCT-3X 10 MIL Locking Turret​

Who deserves a cut of my money? This is the most expensive regular optic (non night vision etc.) that I'll have purchased so feel free to talk me out of it if you can.

Thanks

Short Action Right Handed

Yes I know they are rare.

I will be FaceTiming any potential seller to verify legitimacy.

This will be great 1.5 day class with several great instructors. We will get you to get the most of your equipment does not matter if it’s. LPVO Carbine or anything up to Extreme Range system. You will be taught and pushed to make long range hits
First half day is classroom and I door range for ballistics, equipment etc
Full day is one range with targets from 100 through one mile

Looking to sell my Hawkins one piece tactical 34mm 20MOA mount, bought it new from Hawkins back this last summer and have since sold the scope it was on.

Asking $250 shipped

PP f&f only please

If you have any other questions or need more pictures pm me and we can get on Ft or a phone call.