SOLD

I have a set of 7 Saw Go/no Go gauges.
$200 shipped

Custom Leupold VXIII Long Range 4.5-14x50 30mm tube with 1/3 MOA Turret and Custom Grey Bull Precision reticle. $700 buys it!
Price is FIRM!!
Add $125 for Alumina Caps
Add $100 for Percison Seekins 30MM Low rings.

It’s been 4 years since I’ve competed in a PRS match. Just getting back in the swing of things and have signed up for a match this weekend.

What’s changed? I’ve read the rules but I’m more interested in the gear that’s now available that may give shooters a competing edge.

Current setup: v22 with 20” in a matrix chassis, Steiner T5Xi 5x25x56, trigger tech diamond, ckye pod

Ammo: Lapua center x, consistently low SD’s recorded with an average 1080fps

Bags: Armageddon shmedium


I’ve been eyeing new glass and electronic levels but I honestly don’t know where to start and I don’t want to chase gear. Am I missing anything that will help?

~ Jay

he does good stuff. i have doubts about him but he is human and i wasn't hired to judge his actions.

For Sale: Staccato XC 2011 handgun chambered in 9mm. This handgun is in absolute like new condition, fired less than 100 rounds. Handgun is sold with everything that came with from Staccato: soft case, 140 mm mag, 126 mm mag, rear iron sight plate, rmr plate. Handgun has an island mounted front sight and barrel mounted single port comp. Very very flat and good shooting handgun! No marks on this gun, could pass for new.

Staccato XC $SOLD

Thompson G2 or contender 20” Bullberry 30-30 AI barrel with a muzzle break.

I have not shot this barrel or even mounted it on an action. Got it from a member a while back and just decided to go a different direction.

I have nothing for it in terms of brass, dies, etc.

$200 Plus shipping. Thanks!

I went out to the range today and at the end of the session I shot an AQT target for funsies and wow, I'm rusty.



I still got an "expert" score but compared to the last time I shot this target I was down over 20 points and I was exhibiting bad habits, so it'll just have to be something I work on. I'm thinking about putting a red dot on the rifle, since I tend to shoot red dots better. Does anyone have any experience with these mounts?

LT 659 NV 1.535" absolute cowitness height for Aimpoint Comp M4/M4S

$110 shipped

BLACK FRIDAY BLOW OUT PRICING exclusively for Snipershide!

Included are ALL AGM thermals, night vision & accessories… ALL PRODUCTS!

Shipping included!
Crazy prices on…
Rattlers
Clarions
Adders

Just ask and you’ll get a price that can’t be beat.

I've got a Law Folder Gen 3 and contemplating installing it on a SP10. I am curios how it mates up with a LMT DMR stock or PRS Gen 3 stock. I can't seem to find and dimensions on the DMR stock and I think the PRS LOP would be too long for me.

Has anyone tried these combinations?

Thanks

I have been convinced that it is bad to put too much torque on a muzzle device. I am even more concerned about that with a bolt action long range precision rifle. So when mounting a muzzle device I typically use a low torque value and they always seem to stay in place for me. However, I want to mount a muzzle device as part of a QD system which means my hand will be putting torque on the muzzle device in both directions reapeatedly over time. I worry that will loosen the muzzle device over time and therefore it seems like a thread locker would be an approprate solution. The problem with that is people have me concerned about carbon build up in the muzzle device and it needing to be removed for cleaning periodically. If I mount the muzzle device with Rocksett, I can remove it with water and a low temperature. If I mount it with Loctite (or equivilant) I can remove it with higher temp and no water. Google says 550 degrees F. So my question then becomes, what is least likely to damage a barrel? Is it better to apply 550 degrees to it and no water or is it better to apply 212 to it and water? 550 degrees is well into temporing temps for steel. I would hate to destory or mess up the temper at the end of the rifling. 212 seems like a safe temperature for not changing the molecular structure of the steel but letting the tip of the barrel sit in boiling water seems like a lot of moisture in the barrel that could cause corrosion and that moisture seems like it would be working its way up the barrel into the action. I suppose I could plug the chamber to keep moisture out of the action. I would, of course, clean, oil, and dry the barrel immediately after boiling. So if anyone has any thoughts on this or, better yet, experience with it, I would love to know. Maybe neither option would harm the barrel. Thanks for the help.

Hey all,

I’m new to this forum so my apologies if I’ve gotten anything wrong.

I’m based in the UK and 16 years of age, and my dream and passion is to be a Sniper in the British Army when I join up at 18 and hopefully selected.

Recently I’ve been practising cam and concealment myself and made a ghillie.
Just wondering if anyone with more experience could give any pointers or tips which I could take away and practise with?

thanks for your time,

Josh

Ordered an extra barrel, switching calibers next time instead. Still has machining oil in the chamber from when they cut it. Never screwed on. Bartlein blank. If it shoots half as good as my other one it'll group 1/4". 650 shipped ppff.

InfiRay Rs75 1280 HD Thermal.

One of the best thermals out there with an absolutely amazing image.

Was purchased 7/22/24 so still has over 4.5 years of warranty left. I will include receipt with it. Includes 2 batteries, charging dock, rangefinder, case and manuals.

Found something else i want and dont use this as much as i thought So selling it to recoupe some funds.

16k new, asking 9500

Open to partial trades. Interested in other thermals, ffp optics, axmc, or possibly something else.

Has right at 150rnds on it, not been cleaned. 5/8x24 great brake just making things quieter. 120 ppff

New (no retail box)

Proof Research
Sendero Light
7PRC
22”
1:8
Defiance Ruckus Pre-Fit

$750

Never Mounted. I just took it out and handled it. Well, maybe more than once. But not excessively. Well, maybe excessively. But not enough to cause wear marks. With original box and paperwork. $150 PP F&F.
TIA!

I have a new unfired Pof Prescott 20” 6.5 creedmoor, weighs less than 7 lbs. I picked it up on a trade and I know I won’t use it. 1850 shipped to your ffl, not interested in trades.

I have a Seekins Precision Havak PH2 in300 PRC for sale, it was used for a few hunts this past season. I’m planning on getting a 7 backcountry to try out for next season so this one is for sale. The first 9 shot out of the gun are listed below where I tried different box ammo with it. Gun shoots great as all Seekins I’ve had do.

White box 2783.6,2799 2804
1/2”

Berger 2918 2941 2907
1/2”

Black box 2849 2845 2861
5/8”

Not interested in trades total round count under 40, 1450 shipped to your ffl

I have a very lightly used Surefire M3LT-S Combatlight Dual Output LED handheld. This is a throwback to 2012. I bought this brand new in January 2012 and it did not see much use.

This model has the dual output LED (70 low/800 high lumen output) with strobe mode. The lens is the TIR Fresnel version with a very focused, clean hot spot.

There are a few handling marks on the bezel edge and the tailcap, but the light is in great condition and it functions flawlessly. The lens is immaculate.

Comes in original box with manual.

Asking $155 shipped

PayPal FF, Venmo or Zelle for payment

LaRue Tactical OBR QD Scope Mount, LT111, with 30mm rings 210$ shipped


In good condition, came with a scope I bought. I don’t have the box it came in. What you see is what you get. These mounts are super solid!

PayPal friends and family or Apple Pay for payment.

Barnes 22 Cal (.224") Matchburners with cannelure : $99 / 500 ct + free shipping with "CROWDFAVORITE"

Envy Pro
Hardly used
Short action rem 700
Adjustable mag catch
C-6 buttstock
Xl nose piece
Vertical grip
Thumb rest
Sold
PayPal friends

Have a new in box MPA Comp Chassis in green. Has the folding stock and is for rem 700 SA. Comes with action screws

$700 shipped to you

Trades, can add cash where applicable:
109 Hybrids
105 Hybrids
New Alpha 6 Dasher brass
Aimpoint or EOTech 3X magnifier