Looking for opinions on a .308 subsonic load I made for kicks.

I saw the data from Hodgedon using 8gn of Titegroup for a 168gn projectile. Pistol powder seemed like an odd choice and the 168 seemed light if I could use 220gn.

I had some SW50 BMG D100 powder and worked up a load with a 220gn SMK, got it to 1030fps, no issues, 26" 1:10 barrel.

Is there a reason no one has done this before? It seems easier and safer with a slower burning powder. Chances of me reinventing the wheel better than it was are low so I assume I must be missing something. Feel free to weigh in.

Burris XTR III 5.5-30x56 SCR2 mounted in a Spuhr SP-4016 mount 0MOA.

Includes:
Burris Speed Dial
Scope Caps
Sun Shade
Capped windage knob

Price TYD: $1,150.00 (PP F&F)

I’ve got a couple optics that need to go since they don’t have a home. Some come with mounts but can be swapped out or taken off.

1) US Optics B25 5-25 with H59 reticle. Comes with factory box - $1,375 shipped

2) US optics FDN10x. - SOLD

3) eotech vudu 3.5-18 with H59 reticle - SOLD

4) leupold VX3-i 6.5-20 with impact 29 reticle. Rings and mount not included - $550 shipped

I’ve got a few rings/mounts left. Mostly need to sell but could use a black cantilever 30mm mount or ARMS #22 high 30mm rings for my MK12.

- badger COMM 30mm FDE 20 MOA cantilever. It was painted but I got most of it off now - $200 shipped

- ADM 34mm 0 MOA with Ti levers. Like new - $150 shipped

- ARMS extra high 34mm QD rings like new - $130 shipped

- Spuhr SP-5002 35mm 1.5” 0 MOA. No box but do have a wedge somewhere. Like new - $300 shipped

- MDT 34mm lightweight medium rings. Like new - $100 shipped

Login to view embedded media
Way back in 2017 , before “all the good ones” left or were forced out .

They wanted to question Isaiah about his brothers whereabouts and possible connection to a shooting , Isiah ran away- and Sacramento PD officer Villicruz shot the unarmed teen in the back of the head.

They marveled at the “good shot “ and waited serval minutes to call for medical attention, and even handcuffed him while his brain was on the ground - in case an unarmed kid was still dangerous.

Instead of treating it like a murder - almost 8 years of legal wrangling resulted in a near $5 million dollar settlement to the family. But deemed the shooting justified I guess they were afraid of a young kid they wanted to question about someone else .

I have 4 sets of MDT External Weights (M-LOK)

Price each set: $40.00

Price for all TYD: $150.00 (PP F&F)

Newish member, from SWVA. I have been reading, researching and consuming as much as possible for about a year.

I have 2,500 140gr Berger Long Range Hybrid Target bullets

Price for each box: $250.00
Price for bag (1,000ct): $500.00

Price for all TYD: $1,250.00 (PP F&F)

Custom ammo inserts for Apache boxes. The 1800 size box can accommodate most 300 wm sized rounds or less. Larger than that and you have to step up to the 2800. That can accommodate rounds up to 338 Lapua and is a split insert which allows for multiple calibers. The larger case holds a little over double the capacity of the 1800. They’re made to rest the rounds on the shoulder to protect the tips and allow for you to put spent casing back in. All of the inserts can be customized with whatever information you would like. I can also do some custom designs if that’s what you’re looking for.

Price includes shipping in the US
Insert only
1800-45 shipped
2800-85 shipped
Insert and case
1800-65 shipped
2800-115 shipped

Leupold mk5hd 5-25 pr2 mil, DI wind dial, tenebraex caps. Excellent shape. SOLD

Black aero solus chassis. Only has 200-300 rounds on it. 15” fore-end. There is a couple of nicks in one of the m-look slots.
Pm with any questions or to request more pics.

$450 tyd

PayPal F&F preferred.

Anybody shoot an 18" 22 ARC yet with factory ammo?

Hello everyone, I'm Mike and I'm new here. I'm excited to join the community and learn from experienced shooters and snipers. New to precision shooting but not new to shooting. USMC Vet, retired LEO. Working on building a new rig and excited about all the knowledge shared here.

For sale is a Geissele MK16 rail. It was assembled on a Geissele upper and shot for 20-30rds. It's like new, except where I scratched the barrel nut when disassembling. I didn't back out the anti-rotation screw enough like a dumbass. Still works flawlessly and you can't see the scratch when assembled. Price reflects the scratch.

This one:

$220 shipped.

Login to view embedded media Login to view embedded media

Ive got a practically new(two weeks old at time of post) MDT ORYX chassis. Bought to use while main chassis was at cerakote. Fits remington 700 sa-rh. Upgraded full length mdt oryx arca rail, vertical grip, upgraded cheek rest, and upgraded thumb screws for cheek rest. Comes with a couple of prototype bag rider/butt spacers, factory mdt grip as well as origional cheek rest. Only mod is an internal notch for trigger hanger which isn't visible when rifle is in the stock. Im about $560 plus shipping in it. Will take 425.00 shipped.
venmo or cashapp preferred, will accept money order from supporting members

Selling a Holosun 407C X2 red dot. Great condition. $175 shipped.

Scope is in great shape. Got very little range time. Purchased for a rifle I build for a young shooter in the area but she went to college and has not shot much lately. Have original box with the scope cover, scope caps, etc.

$725 Shipped CONUS

Have a second identical to this. Would sell for same $ if someone needs two or their are two prospective buyers.

Waited on ATV4, sold 2 RCBS chargemasters in 2022

Got ATV4 Spring 2022. Wait! I need a shim? It sits precariously atop the stock scale cover which was not made for weight atop it? the motors bind up over 90 degrees? F-this I'm selling and it (at a small loss) and getting this awesome supertrickler that's coming out!

SuperSpiller comes out. I become a beta-tester with a guy named AH. We test HUNDREDS of software iterations. There is no software fix for that stupid vibratory tube and its temperature sensitivity. I sell it, in anticipation of the Ingenuity Precision in FALL 2023.

The IP is delayed for YEARS! AH sells me an ATV2 (with V3 software) to get me by, 6 months AFTER the advertised IP release (summer 2024). What a primitive POS! I struggle along, awaiting the IP. I polish the trickler tube, I change the belts, I superglue loose parts....But it's never quite right, and the IP never comes....It's now early March, 2024....

So I buy ANOTHER V4, which I received today. Easy to set up. good instructions. Still sits atop like a house of cards. But an elegant machine with great software, and easy peasy bluetooth, and an intuitive App!

After all this frustration for almost 3 years, it is like ECSTASY dumping charges. It just WORKS! l'm in HEAVEN!!! (I fed it AR-COMP, easy test, no fat stick powders like H50BMG, RL50, or n570, to kill this buzz!)

But now I've dumped 100 charges, and I have to empty this fucking thing. Wait, what? OK, take off the hopper. Now what? unplug the fucking wire? WHAT? Shake it like a shank-n-bake chicken? What about these windows? These stupid fucking "windows" on the front and the rear? Oh my fuck, now there is powder all over every-fucking-where and I remember why I sold this POS almost 3 years ago!

But, TBH, this is the one I will keep. Maybe even after IP full system comes out...get another scale, run two of them for different powder morphologies....?

Is there a way to ID a M24 trigger? I have an old Remington 700 and wondering if it’s possible it came with a m24

Does anyone have experience with one of these yet? I'm looking at the Sionics as an alternative to the SOLGW L89, and curious how the camming mechanism compares to the wedge-lock. Also trying to determine best rail length for use with a can on a 16" bbl.

Brand new never used. Just out of the packaging.

$100 shipped conus.

I got some Berger 153.5 in the other day to try out in my 6.5x284 shehane bench rifle. Figured it would be a good candidate with that BC behind that cartridge. Just did a ladder charge 3 shot groups at 100yds to check my speeds with V555. Seated it .010 off the lans and I was surprised. Next step is to check groups at 300-400yds but has anyone else experienced this bullet to be that forgiving? Didn’t matter what charge I had behind it. It just shot.

Recently I broke the bolt on my Sako M995 and as many have noticed they are not longer avaliable via Sako or a 3rd party. I have sent cad off to a Machine Shot to have one custom made because I dont want to through my rifle in the recycle bin due to the money I have invested into it. Is there anyone in the same boat as I am? Potentally making some for people that are in the same boat as I am. Just curious if I am the only one that is in this boat.

thanks

I’m selling a barely used Leupold VX5 HD 3-15X44 Scope with Side Focus, Wind Plex Reticle
I purchased this scope new about 4 months ago for a hunting gun. I ended up getting rid of the gun and just don’t need the scope.
The scope is in very good condition as pictured. It has been to the range only 3 times and it works perfectly.
Purchase includes everything pictured- Scope, bikini style lens covers, original box, owners manual and sticker.

SOLD delivered in the continental US.
I accept Venmo, Zelle or Paypal F&F with no comments or notes.
I am happy to send a video or picture with the current date and your screen name for security.
First to PM me and post “I’ll take it” in this thread will own it.

The VX-5HD is taking optical performance to a whole new level. Leupold gave it a High-Definition optical system for sharp clarity, and the Twilight Max Light Management System for great low-light performance, giving hunters a visible advantage at dawn and dusk when game is on the move. The CDS-ZL2 (Custom Dial System ZeroLock 2) elevation dial locks in place so it cannot be inadvertently rotated off zero. A mere press of a button will allow the user to dial up two turns of elevation, if necessary. On the 2nd revolution of the elevation dial, the button sinks in to show you are on the 2nd turn so you can dial for extended ranges and never lose your place. The covered pop-up windage dial provides fast and accurate sight-in and easy re-zero.

Specifications:
- Magnification: 3-15x
- Objective Lens Diameter: 44mm
- Reticle: WindPlex
- Reticle Construction: Glass Etched
- Tube Diameter: 30mm
- Power Variability: Variable
- Adjustment Click Value: 1/4 MOA
- Adjustment Type: Click
- Reticle Focal Plane Location: 2nd
- Parallax Adjustment: Side Focus
- Eye Relief: 3.70 "
- Field of View at 100 Yards: 3x: 38.20' and 15x: 7.90't
- Maximum Windage and Elevation Adjustment: 75 MOA
- Exposed Turrets: Yes
- Finger Adjustable Turrets: Yes
- Turrets Resettable to Zero: Yes
- Zero Stop: Yes
- Turret Height: Low
- Fast Focus Eye Piece: Yes
- Lens Coating: Guard-Ion
- Rings Included: No
- Sun Shade Included: No
- Lens Covers Included: Yes
- Illuminated Reticle: No
- Battery Type: CR2032
- Holdover Reticle: No
- Waterproof, Fogproof, and Shockproof: Yes
- Length: 13.50"
- Weight: 19.90 oz
- Finish Matte Black

Brand new FN SCAR 16s 16" factory take off barrel, absolutely no damage from removal. Thanks for looking.

$750 shipped
$500