Lightly used. Marks on body from use/transport/safe/mounting. Glass is pristine.

$3200 obo

Now the LSS GEN3 is available for your Howa 1500 and Weatherby Vanguard SA & LA rifles!

Looking to replace the barrel on my cz. Looking at some of the cheaper barrels. I don't see a whole lot about these barrels. All I can find is barrels they did on a rem 597. I don't care about the expensive barrels. Not going to happen. Already into this for more than I wanted to be.

Anyone?

$75
Bravo/Diligent/Q/Dead air probably some others but i beleive its 1-3/8" for hellfire system. Same thing that's on the maverick.

Used for a season, $250 shipped

This pack has barely any use. A couple prs days and that’s about it. Fantastic condition. $120 shipped

Trigger is new in box. $old shipped.

New in sealed package, B&T Acro Adapter for Glock MOS BT-212287
$55 PP F&F

DANIEL DEFENSE DD5V3-(SEMI AUTO AR10)16” .308 CHROME LINED BARREL WITH LEUPOLD MARK 4HD 1-4.5X24 SCOPE, LEUPOLD 1 PIECE 30MM MOUNT.
SCOPE AND MOUNT WERE NEW WHEN MOUNTED. ALL ARE IN EXCELLENT CONDITION, INCLUDES 1 20 ROUND MAGPUL PMAG, RAIL COVERS, BIPOD/SLING MOUNT AND SLING. ROUND COUNT AT 705.

2625, NO TRADES

RIFLE ALONE WITH RAIL COVERS, BIPOD/SLING MOUNTS, SLING, 1 20 ROUND MAG--2150

RIFLE WITH ALL ACCESSORIES, SCOPE/MOUNT, 8 20 ROUND AND 8 10 ROUND MAGS, PLUS DD PARTS KIT--2675

SCOPE AND MOUNT--650

8 10 ROUND MAGS--95

7 20 ROUND MAGS--95

8 10 AND 7 20 ROUND MAGS--170

DANIEL DEFENSE CRITICAL COMPONENTS KITS--120


USPS MONEY ORDERS, CHECK WITH HOLD OR ZELLE.
WILL NEED FFL INFO WITH PAYMENT, ID WILL ACCOMPANY RIFLE FOR TRANSFER IN AT FFL. SE FLORIDA, IF LOCAL-MEET AT FFL FOR TRANSFER POST PAYMENT. FFL WIIL NEED EITHER COPY, NUMBER FOR ATFE EZ CHECK SITE.








WHAT YOU CAN EXPECT ACCURACY WISE--REMEMBER, THIS IS A 16" CHROME LINED CARBINE.

Like new Vortex Precision Matched Rings 34mm 1.26" tall

$old.
Discreet PayPal Friends and Family or Venmo gift.

Like new Area 419 Vector X Arcalock mount

$old.
Discreet PayPal Friends and Family or Venmo gift.

SOLD

*** I will cut this barrel down to whatever length the buyer wants and re-thread 5/8x24 at no additional cost***

Brand new, never fired.

6.5 Creedmoor

Aero Precision Solus short action, 24" 1:8 Twist Proof Research Savage small shank barrel set to correct headspace, Trigger Tech Special Pro Curved (black shoe) trigger, AG Composite Adjustable Alpine Hunter stock with left side flush cups, front picatinny rail with flush cup, and bottom sling studs, M5 detachable bottom metal, American Precision Arms Gen 2 Little Bastard Muzzle Brake. Comes with one MDT 10-rounds poly/steel mag.

Stock is AG "black and tan" carbon camo.

Turnkey rifle ready for glass. Weight as pictured with the mag is 10lbs 12oz. This would make a nice NRL hunter rifle.

Asking $1,900 shipped to your FFL.

No trades. Reasonable offers are good to go.

Post here and PM if you want it.

Brand New
Foundation Samson Dark Distressed
Impact SA inlet/ Genesis Grip
Hawkins M5 DBM
Cheek Riser QD Knob
Wiebad Cheek Pad

$1825 Shippes PPFF/Zelle CONUS

Kahles k525 dlr with LSW and skmr4 ret

Clean. No scratches or ring marks.

Comes with MPA mount.
Have a grey ops mount with acc pic rail for it as well. Add $200 if you want that one over the MPA.

$2350 shipped

No trades

1st Gen (not crane port compatible), capable of 2 zeros, full power MFAL/optic
Approximately 1k rounds on the rifle this was on. Original owner. I purchased it from a small shop that got it from a slightly larger shop but not direct from Wilcox but I cracked the seal on the package.

0 issues with functionality. The wire that secures the battery cap got caught on my gear during a course and broke the wire cable that tethers the cap to the unit. It is replaceable but I didn’t because it didn’t affect its function.

$4750 shipped

I’ve searched the interwebs but wondering if there’s something I missed. Looking for the lightest set of 36mm rings available. I have zco high rings but is there anything lighter out there? Trying to run my zco 420 on my nrl open light rig and need to save any weight possible

Like many of you that load precision on a Dillion 750 and run a bulletfeeder, there was no good option for 6mm bullets. The 6.5 tube that comes with it is oversized and sometimes the rounds would jam in the tube, making you stop and take the whole thing apart to clean it. I got tired of this so started looking for a solution. After realizing there was zero plastic (polycarb, acrylic, ect) tube stock on the market that would drop in, I contacted a machine shop. They ordered some special tubing and chopped it down. Turns out that didn't work. So they ended up ordering Polycarb tube and machining it down to my specs. Now you can feed 6mm bullets without issue and save time and aggravation.


$30 Shipped for 1 Flat Rate USPS
$50 shipped for 2
$20 for each additional

Like the title states….

I have previously used a fired case, slightly sized down the neck, inserted a bullet in long, closed bolt on the round and let the bullet slide back into the case. Then measure CBTO, and start with the bullet backed off another 15-20 thousandths from the lands. Then verify the bullet is off the lands by closing the bolt and making sure the bolt closes with no resistance.

With the zermatt (origin), there is a gas block and spacer between the bolt body. This always makes bolt close have some level of resistance. Would it make sense to remove the gas block and spacer, so that the bolt drops freely so that I can verify the bullet isn’t touching the lands? (I also remove cocking piece and firing pin)

I’ve always done this with one piece bolts, never a floating bolt head.

Thanks in advance.

Can't decide between the two. I run mostly ZCO but need a new gas gun optic.

Is the ZCO really worth 1.5x the cost?

Would be a MPCT1x or a Mil-c

New brass 200 count
$175 plus shipping

Turns out my original prices were a tad high. Price drop

I purchased all of these when Athlon was the new kid in the scene. We all "had a buddy that was a dealer" and got some good deals. Well, I've decided to liquidate my spare scope inventory to free up some cash.

ALL THESE ARE GEN 1 OPTICS
Argos and Talos have nylon shims for setting the zero stop. The rest have zero stops.

Prices include shipping so keep that in mind when you message me . PayPal, Venmo, USPS money order, cash are all acceptable forms of payment. If using digital pay no notes please.

2.5-15x50 Ares BTR MOA- 212001-$425
*FFP, 30MM, Illuminated, zerostop












2.5-15x50 Ares BTR MIL- 212002-$425
*FFP, 30MM, Illuminated, zerostop







4.5-27X50 Midas BTR MOA-213020- $365
*SFP, 30MM, Illuminated, zerostop






4-14X44 Talos BTR, MIL - 215028-$190
*FFP, 30MM, Illuminated, zerostop shims

This didn't shoot in my rifle and I'm just trying to recoup my money. I have 50 NEW rounds of Hornady match 338 Lapua 285gr ELD-M (same lot). Once fired brass will be included (10 PCs)

$255 SOLD shipped

Microtech Socom Elite auto brand new sold

S&W competitor 2.0 with Trijicon RMR04. I have put only a couple hundred rounds through this shoots great but have another project that needs financial support. $1000 shipped to your FFL. I am out of town this week so I won’t be able to ship until next week. PayPal F&F or Venmo

I have three Vector units remaining on hand here at Gunsite. Each will come with a soft case, quick reference card and data cable, the IV's include the inline firing switch. First buyer will have the option to add on a TACT-3 amagnetic tripod with QR pad for $300. BE 10XT enhancers are available for the IV's.

Unit one: A Vector 1500 DAES, 2000m, yards or meters, digital magnetic compass and serial data port. Electronic reticle, 905nm laser. $1550

Unit two: A Vector IV S, 6000m, yards or meters, digital magnetic compass, serial data port. Electronic reticle, 1550nm laser. $4000

Unit three: A Vector IV SFR1, 6000m, yards or meters, digital magnetic compass, serial data port, etched Mil Dot reticle in right eyepiece. 1550nm. $4250

Prices do not include shipping or insurance, buyer pays actual cost of desired service.

If you want to step up to a Vector 21, several remain available in the warehouse in VA.




Cory Trapp
Gunsite Academy, Inc.
[email protected]