Cops shot a tranny who had called them to avoid being kidnapped.

We all know of the cops doing bad things and killing people. Does this count because the person was trans? Or is it justified as a matter of hastening the meeting of the Tranny with God. Who is doing a favor for whom?

Looking for a scope for my b14r and fairly narrowed to these 2 anyone have time behind both the one 7-35 and ares etr 4.5-30 with aprs6 reticle? Right now closeouts on the ares is 800 and the one is 600. Is the ares worth 200 more? I’ve got a couple helos I’ve been very happy with and trust Athlon will be around where dnt is the new kid on the block.

WTS a BNIB Huxwrx Flash Hider 7.62 (5/8x24), never mounted. $115 shipped. Zelle is preferred.

Ok, so I just picked up a Leofoto LS-364C from another member, and I’m planning to run an Anvil 30 on it, with a detachable panning table clamped into that for grid glassing. I know it’s not as optimal as a pan/tilt head for that purpose, but I believe it’ll be a good compromise between glassing consistency and shootability (hope to use it for both hunting and competition, likely more the former than the latter). I like the low-profile apex of the tripod as is, so I don’t want to use something that’ll space out the top of the legs.

My questions (for now, I guess) are:

- Does anyone know of Anvil 30’s in stock anywhere?

- What is the recommended way to get the Anvil 30 mounted to this tripod? I’ve done a lot of searching and for whatever reason can’t seem to find this specific question answered anywhere, although I’m sure it has been.

- Any recommendations on cheap but acceptable panning tables that clamp onto a 1.5” rail top and bottom? This is only for spotting, so it need not hold solid lockup with the Titanic atop it, and $225 just seems a little steep (the RRS offering).

- I’m gonna mount up a Henderson ultralight rail on the forend of a Bergara B14 HMR, but I’m not gonna be able to lay hands on it for a few days and would prefer to order soon to get it to a gunsmith. Would anyone who’s got one be willing to give me the measurement in inches from the front of the mag well to the forend tip? Wanna buy a rail that won’t hang off the end or need to be cut to prevent that.


Thanks in advance for any guidance you folks can provide, and I apologize if these have been answered elsewhere; I’ve Googled all morning and these particular queries have continued to elude me.

Good evening all!

I’m looking to see if anyone is interested in trading some PRS / shooting accessories for some of my revolver collection. Will add cash as necessary and combine multiple pistols for higher priced items.

Please PM me for more pics and I’ll send them.

Trades:
ZCO 840 MPCT3
Spotting scope
223 action
AI barrels
AT-XC
AI ATX Chassis
Manners stock w/ mini-chassis.

Pistol list:
- S&W TRR8 Unfired w/ TK custom hammer and spring kit. $SPF
-S&W 19-9 Carry Comp w/ TK custom hammer and springs. Like new condition -$SPF
-S&W 627 V-Comp w/ TKC cylinder release and race hammer -$SPF
-S&W Model 60 PRO Unfired -$700
-S&W MPR8 TKC hammer, springs, cylinder release and chamfered / polished cylinder -$1200
-S&W 442-1 PC $500
-S&W 360PD - $SPF
-S&W 637-2 $400

Black like new used very little

Has thumb rest and nv bridge

With bipod 650

No bipod 525

Prices are shipped insurance on buyer if you want it

I run a LE Wilson expander die for 6GT. The only size the mandrel comes in, from Wilson is .242. I want to try a couple different tensions, but they don't make variable sizes. Anybody know who make different sizes that would work with the Wilson die body without switching to a new body?

200 tyd Zelle/venmo

Ideally trade for regular SF UE tail cap or 70 shipped

MPA BA Comp for sale, Remington 700, right hand, gunmetal. Has some wear from PRS matches, but is 100% functional. This is a deal. Comes with night vision bridge, internal weights, MPA BA Comp side rails, MPA bag stop. $750 $650 shipped; $700 $600 local pick up (DFW area).

Can you transfer your range card on AB quantum directly to the e-dope device?

Bushnell Match Pro ED 5-30 with mil reticle. Brand new in the box sold

Looking for a short handle for my RC. Havent seen one online. May buy one chop it down and rethread for a handle. If there is a website I havent come across list below. Is there a handle that will work with same thread pattern from a different company I am not familiar about. Have realized this will be better option when not needing leverage.

It's time to fund other projects. All items are well cared for and will ship insured (actions to your FFL). I can take Money orders/cashiers checks (hold to clear) and PayPal F&F. Reasonable offers considered and low ball ignored.

Area 419 .30 Hellfire in Tan - $100
ATS 5/8x24 rifle tuner - $120
1 AICS .300win 5 mag - $55
1 AICS .308 5 mag - $45
spare Tenebraex 56mm scope cover pair (fits ATACR) - $45
PTG .308 SAAMI reamer - $65
Blackhawk tac vest size 26 - $100
Mossberg 590 side saddle - $25
MPA BA Comp folder rem700 RH SA in FDE w/ adjustable mag catch and extra parts - $850
Bartlein Lone Peak .300win barrel M24 26in 5r 10t mod400bb in OD threaded 5/8x24 (800 rounds) - $290
1 Bartlein M24 30cal 5r 10t blanks threaded (29in unchambered) 5/8x24 - $310

Hodgdon H4350 ~7lbs - $300 for local pickup only in Idaho Falls area

For sale 7 Primal Rights small caliber conversion kit for AI magazine. Brand new never used, ended up selling the gun before shooting it “ That’s my life.”
Retail at PR website or $40.00 ea. total of $280.00 I would like to sell then in one bunch.
$140.00 plus shipping. I do not have a lot of feedback on SH, but what I have is excellent. You can check out GB or EBay under xb52hcc and see perfect ratings.
PayPal or USPS money order.
Thanks for looking!

Screen shot from PR web site. Thank you

Forster 6GT seating die.

$50 shipped

Selling a new Schmidt and Bender 5-25x56 PMII with DTII+ turrets and H59 reticle. The scope is in flawless condition and will come as shown with scope caps, no factory box.

Link to scope details HERE.

SOLD

No trades please.

Announced yesterday and I didn't see a thread in the first few pages.


This is their Japan made line. Looks like they dropped down to a 30mm tube and were able to shed some weight.

Will be interested to see what price these come in at and if they had to optically cut a lot of corners to check all the boxes on paper.

New Ultralight Arca Rail - Sig Cross Rilfes​

This adaptation to our Modular Arca Rail System (M.A.R.S.) is manufactured to provide a very good balance of strength and weight that adheres to the RRS Dovetail Standard for the Sig Sauer Cross family of rifles. This rail was specifically designed to get the arca rail as close to the magwell as possible to hit the rifle's balance point. All rails will ship with stainless steel hardware for corrosion resistance.

​

New Pic-Mounted Bag Rider - $40+Shipping​

This Bag Rider has been designed for the AI ATX Chassis, but is compatible with any picatinny based buttstock.​

​

If the length, angle, or bolt spacing is not a good fit for your chassis, let us know and we will custom design a bag rider for you.​

Website - Bag Rider​

I found this cleaning out a barn. Someone made a lamp out of it. I'm thinking old cartridge case.

I have 3 sets of gray ops hybrid mlok weights sold per set of 2.

PSA GF3 Ak 104, runs flawlessly, less than 500 rounds through it.
Build:
US Palm grip
MI alpha rail
ALG ultra trigger
ALG heavy duty recoil spring
JMAC folder
Std buffer tube with PWS ratcheting castle nut and end plate
Trimmed gas tube wrapped in heat wrap (works very well)
Custom ATACS FG sling


$850 shipped to your ffl

Like title says, brand mdt acc elite (Tan) chassis still in boxes.
Looking for $1300 Shipped and insured. F&F paypal/venmo/ zelle. $1250 meet in person. Located in central TX

Stainless A419 Helllfire match muzzle brake. 6mm Brake has not been used but barrel but has.
Asking $125