Excellent condition and a great piece of gear whether your operating or just reacreationally hunting/camping. Coyote tan in color

SOLD


Paypal FF/Venmo

Like new Trijicon ta02 with red chevron. Comes with stock mount, Shaffer machine mount, top rmr mount, and one hundred concepts cover. $1200 shipped. I don't have references here but plenty on tacswap

I need one or two.

PM only please.

Built this for a ground blind deer rifle for my wife. Turns out she doesn't like gas guns, so I bought a Ruger instead. Less than 50 rounds.

Gibbs G4 Side Charging Upper Receiver

McGowen:
Material: Stainless Steel (416R)
Finished Length: 16"
Caliber: 6mm CAL
243/6mm Caliber Twist: 1-7.5 Twist
243/6mm Cartridge: 6mm ARC
Contour: HBAR
Gas System Length: Rifle
Gas Block Journal Diameter: .750
Gas Block Journal Length: Standard (1.9")
Port Hole Size: .100" (For Adjustable Gas Block Users)
Crowning: Recessed
Muzzle Threading: 5/8" x 24 TPI

Aero 15” Quantum M-Lok Handguard
Aero Gas Tube
Aero Barrel Nut
Aero Nitride BCG/Grendel-ARC Bolt
Superlative Arms Stainless Adjustable Gas Block
Area419 Arca Rail
APA 6mm Nitride LB
1 10 rd mag NIP
AGB Allen Key

Asking $900 (with the APA, $800 wthout) + actual shipping. Or face to face in north Idaho. Paypal F&F or Zelle.

Geissele Superduty 556 16 inch. Rifle is unfired. B5 Sopmod stock and gunfighter hand stop. SSA-e trigger. Vortex Precision (Seekins made) cantilever mount zero moa. Vortex Strike Eagle 1-8 sfp. Surefire Warcomp Sport. Buyer pays fees on his end if shipped. Injury to arms has me selling a few things.

Introducing to Sniper Hide the Bag Bullet for MDT, MPA, AI and KRG chassis.
Billet 6061 aluminum body and stainless fasteners.
We believe we have the best bag rider on the market for the above mentioned chassis.
MDT- for ACC, LSS, ESS and TAC21

MPA- for Comp, Hybrid, Lite and Ultra Light



Accuracy International- All Ax series chassis with rear bottom pic rail



KRG- Whiskey, X-Ray, Alpha, Bravo



Any questions can be answered here or at https://www.facebook.com/ALD-Rifles-2263349707249828
These are 90 bucks shipped conus.
We accept Paypal, cash, money order.

BB
ALD Rifles

Selling fortrex 901 .. open box just used around the house . 450 shipped

Looking to buy a set of Acc elite dampers while in Little Rock today. Black preferred but open to see what you have. Pm me for local meet up. Cash buy.

I have a Like New Elite Iron Revolution 50 BMG Steel Bipod up for sale. This was on a Rifle that I just recently purchased and although this is an Amazing Bipod I am old school and just like my Harris Bipods better. It comes complete with feet and Picatinny Offset Rail Mount.

These sell new for $720 dollars so here is your chance to get one cheap.


Only $old Shipped.

SOLD

Used for a few thousand 223 rounds. Well taken care of and in immaculate condition. Comes with the standard stem, VLD stem, and a non-micrometer seater.

SOLD shipped

All,

Have been working through what to do with my Nightforce NX8 1-8 in FDE.

Want to trade for a high-end AR10 complete upper. Wilson, LaRue, Seekins, LMT, etc. No Aero or PSA.

Prefer 18 inch .308 or 18/22 inch 6.5 CM.

Photos below. Will include NF ultralight cantilever mount in FDE.

@EddieNFL pointed out quite correctly that The Bear Pit is severely lacking in information about bears.

So this thread is for posting facts about bears. Stories about bears. Pictures of bears and other bear-like subjects.


In fact, bears can swim.

Sirhr

This is for two AFGs (one appears to be unused and in the box) and a BCM handstop. $30 for all of it, shipped. CONUS ONLY.

sig 10K gen 2s. $2100 used them this past weekend at a hunter one match, fastest response shoot me a text 720346twothree33 I’ll text more pictures if you want them.

Trying to find exterior weights for my enclosed forend. I tried my grayopps but it didn’t sit flush due to the forend being round at the bottom. Does anybody know what weight would fit? I already have the internal weights.

WTS: Vudoo metal 10rd mag, in pristine shape.

Price is 145, shipped to your door.

Acceptable payment methods are PPFF, Venmo and CashApp, all of them discrete, with no comments whatsoever.

If you have any questions DM me please.

B14 HMR 22" 6.5 Creedmoor

Triggertech special trigger

Short AI AT-X chassis with mid bridge.

AI Action rail for 20moa rails on the forend

NO OPTIC, MUZZLE DEVICE, BIPOD, OR SUPPRESSOR INCLUDED

$2,000 shipped.

Rifle shoots half MOA with 147 ELDM. Confirmed it at 900M with a 4" group.

Group from 100m

.5moa 2690fps 8SD 147 ELDM I also hadn't shot a bolt gun in 7 months so I could have prolly kept it tighter.

The Lenzi Large Cartridge Press will load any and all cartridges up to and including 50BMG.

This massive, beautifully machined and finished press features a stainless steel threaded insert for 7/8-14 dies, bronze ram bushing, removable primer catcher, and mounting plate for permanently mounting to a bench top.

Will also accept 1-1/4 dies with removal of stainless insert.

$750.00 PLUS fright

Edit: To be clear, I expected to see zero shift between barrels, just trying to determine what would be considered excessive.

I just started using an AXSR after getting set up with one with several barrels of different calibers. Had a question after my first range trip and thought I'd post this since I don't have any experience with this platform and according to most threads I've found this doesn't seem like the norm.

The gun came with the .300 Norma barrel and I also got a 20" .308 AI barrel, A 27" .338 Lapua AI barrel and a 24" Stainless Proof 6.5 Creedmoor barrel.
What is considered a typical zero shift when swapping between calibers or is there even a typical outcome?
I zeroed the gun with the .308 barrel (175 FGMM) and when I switched to the .300 Norma barrel (215 Berger OTM ammo) it was less than .2 mil off the .308 zero which is fantastic.

When I switched to the AI .338 Lapua barrel (Hornady 285 ELDM) it was 9.5” low and 4.5” left. Would this be considered within acceptable limits or does this sound unusual for this rifle?
I actually thought I did something wrong installing the .338 barrel so I loosened the locking bolt and barrel and re tightened everything and the shots went back into the same group. I understand not to expect it to hold the same zero between barrels and calibers, just wondering if this is typical.

ALL SOLD

2 x Aero Precision Barrel nuts with wrench - $50 40 shipped each
2 x Aero Precision Solus Trigger Hanger kits - $25 15 shipped each

New/never used

Great condition PRS2 in the beautiful Americana letters with high gloss. Has the mini chassis and a full length SRS Arca rail. Barrel channel supports a M40 contour. Only reason for selling is my hands are a little small for the trigger reach and need a chassis that accommodates my comp contour barrel. May regret this one, it’s a beauty! Stock only. Not the complete rifle as the picture shows.

SOLD

I subscribed to Paramount + to watch Taylor Sheridan's Landman and am not dissapointed.
I binge watched Episodes 1-5 until I got caught up and just watched 6.

I was dissapointed Tommy and his thumpers didn't completely wreck 'Manny' and the other rat on the crew involved in his son's beating. I was hoping those pipe hitting n****** would go medieval on their asses with a plier and blowtorch.

I hope they do better when they find the others involved.

Had this in the parts bin and won’t be using it. This pistol grip kit is for a folding AT stock (may fit AW?) and comes with all necessary hardware except for the two screws to attach the grip. I cannot find them. Those will need to be sourced separately. Comes as shown.

Price: FREE, just pay shipping cost (~$7 - $10)

ACC Elite chassis for sale internal weights, rear weight, 2 covers, and dampers. Everything in the photo besides wings.

1500 shipped obo