I have a like new Double Arca - Mini Plate Tac Table Adapter for sale $30 shipped.

Looking to sell my FN FNX .45 comes with everything from factory and has a cheap holster. 3 ten round mags asking $600 shipped to your ffl.

Looking to sell my Ruger Hawkeye Long range chambered in 6.5 creedmoor. Has about 250 rounds through it. Comes with Arken LH-4 6-24x50, MDT ground pod, aftermark 5” arca rail. No aics mag included. Has some scratches from being strapped to a pack see pictures. Asking $1500 obo plus shipping.

Will trade for ARC Mausingfield M7 open top s/a. Or Leupold Mark4 4.5-18x52 Pr1 illuminated #183624

Hello Everyone,

I have not used the post exchange before. this morning I posted questions on a couple of items and received PM's from someone other than the OP.

Is this legit?

Both started: "The item is yours. Send money to:.........."

Thanks

Stephen

Just sold my 300 PRC rig and am looking to offload my ammo supply.

I have four 20rd boxes and one 17rd box (97 rounds total) of Hornady Precision Hunter 212gr ELD-X.

Asking $180 FTF / local sale. I am located in Louisville, CO and can meet in the Boulder/Denver area. May consider meeting in Lone Tree for those in CO Springs.

Willing to consider shipping for an additional $15.

Looking to sell two SCAR 17/20 reciprocating charging handle (RCH) bolt carriers. Each includes an OEM charging handle.

This is all you need to convert your NRCH SCAR 17S or 20S to RCH.

Asking $600 shipped each.

I accept PayPal, Venmo, Zelle, and USPS MO.

Like new PSA AK103S
ALG Trigger
TD grip
$950 $900 net to me, FFL must accept transfer from individual

CZ75 Tactical Sport
CZC Accu-bushing
SAO trigger
Like new
$1800 net to me, FFL must accept transfer from individual

Bought this from a member on snipers hide that was making these a few years ago, believe his name was softcock. Has seen a couple matches but looks brand new. Should fit any 308 sized cases, I used it for 6 dasher.

Asking $175 shipped CONUS

Payment via PayPal F&F or cover fee, Venmo, USPS money order

Lapua 338 lapua magnum ammo

290 rounds of lapua 250gr lock base lot #4318033 -$sold

60 rounds of lapua 250gr open tip match scenar lot #4318017 -$420 shipped

60 rounds of federal premium GMM 300gr matchking BTHP -$350 shipped

Hey all,

Loading for a factory REM 700

Using Hornady modified case and OAL tool. Using the tool to find my jam point and I am getting a number of 2.802. This is holding the case firm into the chamber via the rod the case mounts on and sliding the bullet until contact, tighten set screw and remove case. Bullet sticks in barrel but a small tap on the side of the stock below action frees bullet.

Using this 2.802 measurement I have my seating die set for a .020 jump and I have my finished cases sit a CBTO of 2.782

This is giving me a OAL of completed rounds that are 3.444. This is nearly .105 longer than the max OAL according to the books. Has anyone ever had something this extreme?? I have shot rounds at this measurement and have chambered and extracted them without sticking a bullet.

This got me thinking as it seems extremely long. The other day with the bolt stripped for the gun and checking the fit of some brass I tried the 30-06 modified case for shits and gigs. The bolt wouldn’t close on the modified case without some good effort. I then compared the modified case to a factory Barnes load and to my sized cases.

The distance form the base to in which the shoulder starts at the top of the body on the modified case seems quite a bit further forward (longer) than on either the factory loaded Barnes or my sized brass. Both the Barnes and the modified case measured 2.044 case base to datum using the Hornady comparator. The Barnes case would however allow my bolt to function relatively free while stripped.

If the shoulder junction on the modified case is keeping it from going as far into my chamber wouldn’t this give me a longer CBTO as the bullet then has more distance to be moved until jam point while using the OAL tool. I was thinking I had a .020 jump but now I’m wondering if I am a lot closer to or even potentially jamming.

Attached are a couple photos. One is a dummy round, loaded Barnes factory load and the modified case. Others are datum measurement of the modified case and Barnes load, OAL and CBTO on the dummy round.

Thanks Alan

Aero 10.5” 223wylde barrel, low round count - $OLD
Daniel Defense Iron Sights - $100
Aero .750 pin or screw gas block (new) - $OLD
.750 gas blocks, used (2 available, not pictured) - $OLD
Aero Ar10 standard charging handle, new - $18
Standard charging handle, A2 flash hide, picatinny qd sling attachments - $12ea
Geissele 2 stage triggers, high round count (w/ nsn and cage code)- $OLD
Aero milspec trigger, new - $OLD
Midwest industries loop end plate sling adaptor - $18
Aero A2 grip and buttstock - $25
Crosshair hydrolic buffer and spring - $75
Magpul bad levers, ones screw is getting stripped - $OLD
Commercial spec buffer tube - $20

Pyser Small Arms Collimator for M110 and M2010. Works with AR10s and 30 cal rifles. Great for bore sighting and confirming your zero without firing. Excellent condition.
$550tyd

DROP TO $450

Selling my GA Tempest action with a 26”bartlein 1 7.5 twist straight taper 6 dasher barrel chambered by GA
Barrel has just under 150 rounds
Will also include the tempest action wrench to remove barrels. GA sells pre fits for this action

Price shipped to your ffl
$1500 BARRELED ACTION with action wrench

Also have a 6 creedmoor barrel just under 200 rounds if buyers interested

Springer X-Five Legion plate for Romeo3 Max $35

Don't have much time for LR anymore so selling my rig. Around 1000 rounds through it, good shape but it is used

BARRELED ACTION
22" Proof 6.5CM Prefit
Rugged Suppressor Brake
Tikka T3X Action, Bolt, and 2 Stage Trigger
Murphy Precision Scope Base
Area419 Dragon Scale Bolt Knob w/ Swept Handle
Mountain Tac T3X Billet Bolt Shroud
$1400 shipped

CHASSIS
Spuhr SICS 16" Chassis Cerakoted in H235 (Coyote)
Spuhr ARCA Slider w/ Pic Section
Spuhr Adjustable Bag Rider
5ea MDT Steel 308/6.5 Mags
$1200 shipped

Not interested in trades

Bore guide was used once & the o-ring ripped off when I pulled it out, you’ll need to grab a pack of them at your local hardware store. Cleaning rod & jag have never been used.

$100 shipped
Zelle or payment

Used once, I prefer the TBAC CB brakes personally.

$80 shipped
Zelle for payment

First start off by saying I have a B14R factory rifle in a MPA comp chassis

It has shot decent. Not super but good enough

I shot it a bunch last year and somewhere along the way left my suppressor on and based on my cleaning and borescope exam I have pitting in my barrel

Not a huge deal but I'm really hoping to stretch its legs this year in long range rimfire and torn on what I should do

I know guys here have owned many rimfires.

Would an upgraded B14R with the bolt smoothed out and custom modacam barrel be worth it. Or should a guy invest in a Vudoo or Rimx instead

I’m looking for accuracy. I don’t compete but if I did it be in a open class much like fclass as that’s what our local club does

Looking for opinions on which way to venture

Before someone says shoot it and see what it does. I plan to shoot it. I’m looking for the next step regardless.

Lightly used: 150ish rounds on this TT 2 stage ar15 diamond pro curve trigger. No trades please.

$195 to your door.

For sale is an excellent condition Type 2 RMR (black).

Has the original box and papers
Will include a sealing plate

Asking $425 shipped OBO

Bighorn Origin Prefit
6.5 PRC Proof Research Carbon Barrel 22”
100 Rounds through the Barrel

100 Pieces of Lapua 6.5 PRC - 1 Time Fired Brass
199 - Berger 156 EOL Bullets

Bighorn Origin Magnum Bolt Face

$1,100 for everything (Forgot to Include the Bolt Face in the Photo)

For sale is an excellent condition Type 2 RMR (FDE).

Has the original box and papers
Will include a sealing plate

Asking $425 shipped OBO

115 Pieces Lapua 300 PRC 1x Fired $115 + $15 Shipped to your door​

Tan, waxed canvas, Lite fill. New. 105 shipped.