Has anyone on here used a Preferred barrel blanks barrel on there rifle if so how did it shoot I'm looking gnat picking up a shouldered pre fit from them in the near future but cant seem to find any reviews on them.

Like new Q Fix stock.

$300 shipped

Thanks

As new on these, as a set, includes the height adjusting strips. Multicam in case it wasn't obvious.

65 shipped USpS money order, check or zelle.

Ok, so I just built myself (ie modified an existing rifle) my "new" go to hunting rifle. Purpose is to go after everything from white tail to elk.

Right now, it is a 24" Tikka in 7 Rem Mag with a threaded barrel running a can. And unfortunately it is sitting in a KRG Echo stock (in retrospect, I should have simply gone for the MDT Oryx chassis instead (which I run on another gun and love for a budget stock / chassis).

I'm really fighting with myself to have my smith cut the barrel down to 18" or even less. I mean, it is a hunting rifle. 7 Rem Mag, even through a 16.5 or 18" barrel is more than sufficient to ethically kill an Elk at 500 yards, and I don't really see myself shooting past that from an ethical perspective. And the fact that it will be light and maneuverable and easy to ruck with (even with a relatively short titanium can on the end) just makes it awesomer. Yes, I invented that word, but I shouldn't have needed to. I also figure the can will help temper the fireball that erupts out of the front when I shoot.

Besides heresy, what good reasons are there to not do this (based on the conditions I said above)?

Cheers!

Hornady 6.5CM once fired, 220+ count. Since it will go in a med flat rate, will keep the boxed stuff intact.
All together, 65 shipped.
USPS money order, check or Zelle.

Blem Atlas Cal Gen 2 (BT-65 - pic rail clamp). New in sealed package. $Sold shipped conus.

NightForce A101 30mm ultralite rings - medium (1.00"). Used but excellent condition. $Sold shipped conus.

New

$old shipped

Brand new in the box Bergara Premier 300PRC 26" 1-9 twist, #5.5 contour, 5/8x24 threaded.

$825 shipped to your ffl

24in Proof Prefit threaded 5/8x24. Less than 100 rounds down it. 7 rem mag. 1:9 Twist.

$600 shipped.

Link to site where I purchased January 2022. https://www.midwayusa.com/product/1...KwTPvvYuMo_z_Ips5CVCNKSndhya3QWxqF&pid=654055

Snarky Puppy - found and led by the bassist, Michael League

Login to view embedded media

For sale

Spuhr 6001 Mount
In great condition, just went to a 6002 cause I needed some extra height.

Have the bit, wedge, and a couple extra screws. For the life of me I can’t find the original box but I have another spuhr box I’m gonna put it in.

SOLD

Vortex, 34mm 1.10 Pro rings, used for a short time on a bolt gun, no issues, moved scope to AR.

55 shipped usps money order, check or Zelle.

Cut carry handle, sight wheel set for the 50 Santos IBZ. I cut, smoothed and refinished with aluma black.

70 shipped lower 48 usps money order, check or Zelle.

Have to start somewhere in a place like this. I just built a 6GT and I am working up loads now. Ill try and not ruffle many feathers, I have reloaded many many cartridges and I am always wanting to learn more.

Selling my suppressor cover(9” length). Nothing wrong with it. I just have a couple and finally settled on a different one. Price is including shipping
CONUS

$75

While this is just a new twist on old tech/ability's, what has morphed from it is really interesting. What is being hawked in the video, as new & improved is also now down to squad level, using preset landmarks as diversion points. Mw & burst, aka fucking over your enemy/s no matter who they are,...

Login to view embedded media

Burris XTRiii 5.5-30x SCR 2 mil reticle $800 shipped in CONUS

Is it gone ?

Would they really let the plebeians know ?

Viper PST 4-16x50. FFP, EBR-1
MKMachine throw lever and level
Vortex low precision matched rings
In very good condition, small mark here or there
Pulled this off a gun several years ago and found it again on the back shelf of the safe.
Mounted and shot to 1000 to check it out. Everything tracking as expected and illumination works

$425 shipped

Bushnell XRSii 4.5-30x H59 reticle Seekins rings $750 shipped in CONUS

I have none of Leofoto 50% off certs.

$75 each SOLD

I can do Venmo, Paypal F&F, Zelle.

I have a slightly used MPA CDG Elite 20MOA barreled action chambered in 6GT 1/7 Twist 26" finished length.

Originally started life as a MPA PMR PRO II after 1100~ rounds I switched back to my IMPACT 737. I just prefer the 2 lug action over the 3 lug.

I have the following accessories: Pivoting and Fixed bolt handle (installed) , Extra Firing pin spring, 3 bolt knobs, and an American Rifle Company CDG action wrench.

Barrel still has long life to it, shot .5moa all day with 109 bergers.

$old to @Huskydriver

I WANT TO BUY a chassis for a Savage 10/110 short action inlet receiver. I prefer an MPA BA Competition Chassis but will look at similar options. Any color. Weights and accessories would be great. Please let me know what you have available and the price. I can pay by Zelle, PayPal or other method. Thanks, Doug

Delete please. Didn’t read rules sorry.

Brand new FDE Leupold MK5 3.6-18x MRAD with PR2-Mil reticle. Box is still sealed with shrink wrap. Bought for a dmr build that I went a different direction on. I will not break the seal to take pictures.

- SOLD - shipped to the lower 48

Nightforce NX8 2.5-20x MRAD with Mil-XT reticle. Mint condition, with original box and contents. Used for 2 range days on a 308 that I only shot for 20rds combined. Mounted in a Spuhr SP-3002 1.5” 0 moa mount.

$1900 shipped to the lower 48

Zelle, Venmo or PayPal FF accepted