Looking to fund another project so need to clear out some stuff that’s not being used.

This was purchased and an action was installed but it was never fired as I ended up swapping the action into an XLR Chassis.

Grayboe Ridgeback R700 SA
M81 Woodland Camo
Grayboe M5 DBM
Full Length Arca
Rem Varmint Contour

All original hardware included if you want to swap back to that and remove the ARCA rail.

Asking 600$ Shipped

North American Rescue Combat Casualty Response Bag -Squad brand new and complete kit. Expire date 2015. Sheers, 2 Cat tourniquets and all other items including the bag is in excellent condition, never opened.
$150!! shipped. —sells for over $400 brand new. Conus only.
Zelle

Evening gents. Im setting up a rifle, picked up a ZCO527 for it and I'm struggling to get proper eye relief. It seems like a lot of guys have the opposite problem from me, I'm 6'4", long neck, long arms, but with the way I interface with the gun I can't get the scope back far enough. I'm setting the gun up for shooting barricade 90% of the time, and I normally use around 14.5" LOP.

Im considering buying a pic rail with an overhang so I could scoot the mount back further. Leupold "mark AR", Scalarworks "fuse/01" and PRI are what I've looked at as possible solutions. I'm a little bit hesitant though because this adds complexity, more machined parts, tolerance stacking, things to come loose smd shift etc. Does anyone have experience using a riser like this on a PRS type gun? Any problems with it? I imagine it'd be fine but it gives me the ick as the kids say. I know too many CNC operators...

Another option is to have a scope base custom made that gives me a few more pic rail slots to the rear but that'll be a PITA.

I've never had this problem before so I'm a bit vexed.
If anyone has suggestions or experience using a riser on a precision gun lmk I'd like to hear your thoughts.

Specs can be found here. Sold the upper that it was on and now don’t have a use for it. I purchased it new. No box but comes with scope, factory lens covers, and Aero Precision Ultralight Extended 30mm mount. Glass is in excellent condition and works as it should (including illumination). Battery not included.

$300 obo shipped PPFF preferred.

Leupold Mark 6 1-6 w/ TMR-D reticle with scope covers and a Leupold IMS mount. $1500

Can’t make the match. It sold out almost immediately. $250 and I’ll email the director to get the names switched over.

shipped CONUS
Zelle or check, no PP
Excellent condition
No loctite used, slightly used

Good condition Remington 504-T 22lr

Shoots amazing has had arca rail added and threaded 1/2x28
50 yard group with eley tenex in pictures
(bipod not included just bare rifle)
Comes with 2 6 rounds mags

$800 shipped

All items are best offer and prices include shipping

ARC M10 rings 36mm x 1.1”H $100
MK Machining billet 36mm level $30
Vortex PMR rings 34mm x 1.26”H $75
Vortex PMR rings 34mm x .91”H $75
Redding Competition 3 die set .243 Win $100
KRG spigot is sold
ADM Recon 30mm mount is sold

Up for sale is a 16-inch 6.5 Grendel AR-15, fully built with high-end components and never fired—ready to go right out of the gate.


• Receiver Set: SMOS builder set, finished in Bazooka Green


• Stock & Buffer System: Magpul stock with A5 system throughout for enhanced recoil management


• Barrel: 16-inch stainless steel Ballistic Advantage barrel, optimized for precision shooting


• Handguard: 13.65-inch SMOS rail for a streamlined, lightweight setup


• Bolt Carrier Group: High-quality, built for reliability in 6.5 Grendel


• Accessories: Comes with mags included


never been shot.


Price: $1,500 OBO

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

No trades, I already got a replacement.

Nightforce ATACR 4-16x42mm F1 Riflescope ZeroHold .1 Mil-Radian Capped Windage DigIllum 12 Mil PTL Mil-XT C615 - Like new, was mounted and shot one time. I just need more magnification, Has original box and everything it came with plus a One Hundred Concepts ScopeCap Pro Ruggedized with ARD for the front - $OLD​

I have a new set of secondary gray ops weights. It's only the middle and closes to the action. I'm using the small one the end of the for end. So only in pics is for sale.

$135 shipped. OBO

Excellent condition. Like new really!!
Tracks perfect .
Comes with throw lever
Sunshade
Vortex cantilever mount
EBR-7C Reticle

$700 shipped
PayPal F&F only

Trijicon MRO HD 1x25 Red Dot Sight with 3x Magnifier on QD mount. Includes a Tennebraex kill flash, original box and accessories that came with it. Never used in comps, very minimal salt.

Reticle modes:
-2.0 MOA dot with 68 MOA + 2.0 MOA
- Seamlessly transition between center dot only or full reticle options

Includes:
- Full Co-Witness Mount AC32068
- 3x Magnifier and Quick Release Flip-to-Side Mount
- Trijicon Logo Sticker
- Lens Cloth
- MRO and MRO HD Magnifer Manual
- Warranty Card
- Mounting Tools

SKU: MRO-C-2200057

SOLD for the set TYD CONUS

In re: the Wisconsin Supreme court victory by the dems? I mean, it's great we in FL kept things good by taking both special elections, but I'm a bit worried that this libtard judge in Wisconsin might "re-gerrymander" those districts to cause us problem in the mid-terms.

What do you think the "end-result" impact is going to be?

Login to view embedded media
And he did t have sufficient lights so local pigs beat the fuck out of him and arrest him because what other option would they have?

While the feds that we all hate are actually arresting the worst of the worst of the illegal murdering child fucking hoards - local pigs are still happy to get tough on senior citizens.

Used in good condition
Talley 20 MOA Rings
R700 SA
30mm
Low height
Top mount level
Will include the rear cap without level as well.

30$ Shipped

Very lightly used Hawkins Precision Ultralight Rings.

34mm
Medium Height
Top Mount Level

140$ shipped

Want to get a suppressor for PRS shooting. Shooting a traditional PRS gun - heavy bolt action. Not so much a suppressor as much as something that will control muzzle flip so I can better spot my shots. Will not shoot with a brake which is what 90% of what PRS guys do. Already losing my hearing.

Anyway, considering Area 419 Maverick, ThunderBeast Magnus RR or HuxWrx Flow 762 for PRS. Don't like that the magnus is not modular (cannot change length or shoot w/ or w/o brake) so in that regard prefer the Maverick. Somebody I shoot with has a Flow 762 which he likes a lot and says that he can spot all of his shots with it (heavy PRS rifle & 6.5 CM).

Looking for comments from those who shoot PRS or have experiance w/ the listed suppresors.

3-18x44 with H59 reticle and M5B2 elevation turret.

Excellent condition throughout, with light ring marks. Leupold flip caps.

$1500 Shipped insured continental US, Paypal F&F or Venmo. Add 3% for Paypal G&S

I’ve scoured the internet for an hour and can’t find any LOP specs for the Solus chassis. Could someone measure one extra pretty please?

So I’m looking at the leupold mark 4 spotting scope and I’m seeing prices vary by $600+ by just the reticle. Am I missing other features or is the tremor reticle worth the extra cost? I’ve tried to find threads covering this but haven’t found any yet

Got to have one. Work has started, pics to follow.



Login to view embedded media