Like new no package
No marks
30mm
High

100shipped
No trades
No offers

So my Ruger American gen 2 is leaving ejector marks on what I would think are mild loads. The ejector seems to stick up higher than my other bolt guns (including gen 1 American) and seems pretty stiff too. I got these marks on

UPDATE WITH VELOCITY:
20” Odin Works Both 123gr hpbt:
IMR 4895 (38.8gr 2775, 39.2gr 2828)
Staball Match (39.5gr 2813, 40gr 2841, 40.5gr 2879)

I took a couple coils off the ejector spring and ran this test again. No ejector smears, although I know I am too hot with the top Staball load, which is .2gr under Hodgdon max.

Used in good shape. Glass is blemish free. Has throw lever battery and tool. Sunshade also
Included.

Arc mbrace 1.5 height 0moa

$2500 shipped Apple Pay Ppff Venmo zelle

Buyer flaked so putting it back up with a lower price. I have an excellent condition Tract Toric ELR 4-25x50 for sale. Comes with the box and what it came with. Glass is in great condition and no scratches. Also a set of Butler Creek Element scope caps and a cheaper throw lever which works great. Scope has a lot of elevation at 47 mils and parallax down to 15 yards so would be great on a rimfire or ELR rifle. $1180 shipped to lower 48. Will take PayPal F&F, check or money order. PM any questions

New take off. Pretty full featured at a low cost. Includes action screws. Will fit any Rem 700 SA footprint action. Takes short action AICS mags. Includes action screws.

$150 TYD via Venmo/Discreet PayPal. Ships USPS with tracking.

B5 Type 23 AR grip FDE -15$

SBA3 pistol brace blk - 65$

Weapons Observer B5 Bravo Cheek Riser blk - 25$

All prices are shipped to you.

Payment Pp F&f and Zelle

Selling my Kahles 525 DLR SKMR4 Reticle RSW.
This scope has been incredibly reliable, but I'm moving to the 540 DLR.

-Few scratches from use.
-Includes Hawkins 1.15” rings

$1,800

Read today that little half a fag David Hogg is making 100K for his DNC gig plus the extras.No bad for little scamming prick.

Used in good condition. Previous owner did remove some material from the action area but it did not affect my rimx. Comes with ao thumb rest and low cheek piece. Rrs arca rail.

Add 13in handguard for an extra $250

$1350 shipped Apple Pay pp ff venmo zelle

WTS/WTT:

1 case Berger Hybrid Long Range Hybrid Target 6.5 Creedmoor 144gr JHP Rifle Ammo - 200 Rounds - same lot.

$400.00 shipped

Trades for 6 ARC ammo, 6 Creedmoor ammo, 6mm bullets, etc.

Selling a few things i'm not using anymore:


L.E. Wilson .308 Expander Mandrel w/ .307 mandrel - SOLD

RCBS Hand Primer - SOLD

Giraud Tri-Way .308 Trimmer - SOLD



Payment via Zelle

Curious if anyome has any feedback on those 3 suppressors (all 30 cal).

Plan to use on 3 bolt guns, 308, 6.5 creedmoor, and 300 prc - would like to use it on an ar15 but it wont be a primary use.

I want one thats repeatable poi shift, decent suppression, and good recoil reduction.

Which is best?

Full length SRS A2 FDE Handguard off a new chassis. $175 shipped.

One of the last items I had laying around. These have been tumbled but are unprocessed. Been fired 5x and annealed after each firing, only seen a mild load of 105 hybrids at 2860.

190 total pieces for $65 shipped be a good spare batch for someone looking for some extra brass or just getting started

Zelle or cash app

We met in 3rd grade and were pretty tight until he passed away at age 47 late last year. He was stricken with severe MS, and was slightly better than bedridden for his last 2yrs.

Shortly before he was put in long term care, he had me gather all his firearms and store them at my house with explicit instructions that no one else was to be trusted with them.
He was single, no kids, and aside from a few distant relatives, no next of kin.


Anyhow, one of the pieces was a basic Springfield 1911 of mid 90s production. As a received it, it was in a state of him modding it, or at least had plans to refinish it.

It's missing the sights, and it appears he had removed the factory bluing, and had polished the slide and lower. Kind of a messy job, but he was deep into MS at the time, so no fault there. No clue what his intentions were in the end with it.
Functionality wise, it seems fine. No feeding or eje issues.

So, what I'd like to do is get it back complete again, with minimal mods, no desert tan finish, and no tactical nonsense.
Just refinshed with some decent sights. It won't be used in any role, basically just a rememberance of him.

I'm wondering about the finish. I'd like a basic, matte blueing. I have access to a sandblaster in my shop and was considering doing the blueing myself. Anyone think this is unwise? Any tips? I do NOT want a flawless finish as it has some charcter to it with minor dings and such from him carrying it in his truck for decades.

Daniel Defense DDM4 PDW 300 BO
M-LOK 6" rail
7" barrel threaded 5 ⁄ 8 × 24 with HUX muzzle brake.
Total length is 20 3/4" - 25" (w/ brake)
Maxim Defense Pistol Stock
Daniel Defense Full-Latch Impact Plastic Case
Sitting on top is a SwampFox Arrowhead LPVO 1-10x24 with illuminated Guerrila Dot BDC in a SwampFox Hostile Engagement 30MM Mount
$2500 buys it located in Laquey, MO

I have a 7-35 atacr with mil xt reticle. I’d like to trade for 7-35 with mil c reticle. I’d also sell it. Thanks.

Easing into ELR with a 1-mile build. I have a Defiance action/Bartlein barrel, and it will be going into a KRG Bravo chassis with a lot of weight added. I am trying to choose a magazine and can't seem to find much info. Is it best to just pick one and go? Or do I need to check with the builder on chamber dimensions to determine if it should run a binder plate or not? Sorry if this has been asked before.

I have several MDT weights for sale. All come with the original hardware that was included.

LOP buttstock spacer weight- $50 shipped

SRS Premier buttstock spacer weight- SOLD.

M-lok exterior weights. 2 pair. SOLD.

For sale: Kahles K18i-2 1-8x24 scope with 3GR reticle

The scope comes with the 3GR reticle, two interchangeable throw levers (one long, one short), cover, and original box/papers. It has a large 150 ft FOV and a daylight-bright illuminated reticle with a MAX LIGHT function for extreme backlight situations. I've added a Kahles ballistic turret ($195 cost) for easier elevation adjustments (original turret included).

The scope is in like-new condition and works just like it's supposed to. It was mounted and taken to the range only once for zeroing.

Price: SOLD, which includes scope, turret, shipping, and insurance. No trades.

He responded to a WTS about an Aimpoint optic i'm looking for. He used someone else's photos in the response and would not provide a timestamp or proof of life. Found the original images he was using here:


@ThatGuy01

Reported

I see this a lot now and that is people asking for pre-fit barrels. Kelbly's has held our headspace tolerance within .001" since the early 90's. Our actions have always had interchangeable "pre-fit" barrels for them. Our dealers all over the world can stock barrels chambered by us, or they can cut any blank with our dimensions provided on our website to make a pre-fit. You have NEVER had to send a Kelbly action into Kelbly's for chambering, we have always provided pre-fits.

I'm just putting this out there because we constantly get left out of the pre-fit talk but have held headspace within .001" since our first CNC was set in 1992.

We hope everyone has a great 2020!

As the title states. This is the non-QD version. Never used.

$130 shipped.

Located in Fairhope, Alabama
Payment by Zelle or Paypal

WTS-Long Shot LR3 with Tablet
2 mile range
Long Shot Tablet loaded and ready to go
Used only a couple of times

I have no place to shoot long range any more so this needs to go. Works great.

$550 shipped CONUS-SOLD

From left to right:
- SOLD Mesa Precision short action: $475 shipped
(bedded for factory Remington 700)
- Mesa Precision short action: $475 shipped


- SOLD Brand new Mesa Precision short action with adjustable cheek piece: $650 OBO
- SOLD Manners EH1 short action Gen 2 Mini chassis: SOLD

Message for more details