So apparently Mack Bros snuck the Element action on their site before Shot Show. Looking at the specs and price I decided to grab one for a lightweight 308 shorty build. I also grabbed their lightweight integrated ring mounts.


I'm surprised more people aren't talking about this action. As far as I can tell it's the lightest stainless action and way cheaper than the other options in it's class.

I have 428 left.
359 never touched
69 were loaded and pulled with inertia hammer so they aren’t deformed.

$170 shipped

Sold

$175, shipped within USA. No international shipping.

Basically new, used at the range a couple of times. Includes the True North Raven Spacer Kit.

First posted "I'll take it" in this thread trumps any PMs. Venmo or certified check. Thanks for looking and please let me know if you have any questions.

/Steve

MPA ESR for Remington 700 SA w/ Extended NV Bridge & Competition Rails
Also comes with the MPA Mag Block and EVG Grip
Black

$950 Shipped

I put some hobby wheel weights to add some forward to allow my rifle to perfectly balance. They just come right off and I can remove them before hand if you want.

Hey guys, Selling a Loaded M1A with National Match barrel in excellent condition. Manufacture date looks like 2011. Very well cared for. 1650 shipped.

Advantage Arms 22LR kit w/3 extra mags
Kit retails for $265
Mags are $20 each
Will sell all of it for $200 shipped.
Kit in like new condition.

I have a used V3 for a manners TCS fur sale. It has some wear and scratches but functional, $75 shipped.

Looking for a 10in, RH, like new with bag rider thanks

.44 projectiles $55 (240gr)(500)
$25 (165gr)(200)
.45projectiles $45 (200gr)(500)
I am in central Florida (Sarasota/Bradenton)
As you know these little critters are collectively fairly heavy. If you are in my area I can meet up with you to save shipping costs.

I have a new 6.5 cm. Rem 700, 21' bbl, 8" twist. Doing a workup of handloads for shooting varmints, pigs, etc. I have some 140gr and 125 gr bullets to load up, but I have heard good things - and bad things - about loading 95 gr bullets, which I also have. I have heard that you shouldn't use them with suppressors because they aren't stable. I have heard that this twist overspins them, too.

I am hoping for some expertise on 95 gr loads, as well as some comments on safety with suppressors.

Thanks.

Like new no package
No marks
30mm
High

100shipped
No trades
No offers

So my Ruger American gen 2 is leaving ejector marks on what I would think are mild loads. The ejector seems to stick up higher than my other bolt guns (including gen 1 American) and seems pretty stiff too. I got these marks on

UPDATE WITH VELOCITY:
20” Odin Works Both 123gr hpbt:
IMR 4895 (38.8gr 2775, 39.2gr 2828)
Staball Match (39.5gr 2813, 40gr 2841, 40.5gr 2879)

I took a couple coils off the ejector spring and ran this test again. No ejector smears, although I know I am too hot with the top Staball load, which is .2gr under Hodgdon max.

Used in good shape. Glass is blemish free. Has throw lever battery and tool. Sunshade also
Included.

Arc mbrace 1.5 height 0moa

$2500 shipped Apple Pay Ppff Venmo zelle

Buyer flaked so putting it back up with a lower price. I have an excellent condition Tract Toric ELR 4-25x50 for sale. Comes with the box and what it came with. Glass is in great condition and no scratches. Also a set of Butler Creek Element scope caps and a cheaper throw lever which works great. Scope has a lot of elevation at 47 mils and parallax down to 15 yards so would be great on a rimfire or ELR rifle. $1180 shipped to lower 48. Will take PayPal F&F, check or money order. PM any questions

New take off. Pretty full featured at a low cost. Includes action screws. Will fit any Rem 700 SA footprint action. Takes short action AICS mags. Includes action screws.

$150 TYD via Venmo/Discreet PayPal. Ships USPS with tracking.

B5 Type 23 AR grip FDE -15$

SBA3 pistol brace blk - 65$

Weapons Observer B5 Bravo Cheek Riser blk - 25$

All prices are shipped to you.

Payment Pp F&f and Zelle

Selling my Kahles 525 DLR SKMR4 Reticle RSW.
This scope has been incredibly reliable, but I'm moving to the 540 DLR.

-Few scratches from use.
-Includes Hawkins 1.15” rings

$1,800

Read today that little half a fag David Hogg is making 100K for his DNC gig plus the extras.No bad for little scamming prick.

Used in good condition. Previous owner did remove some material from the action area but it did not affect my rimx. Comes with ao thumb rest and low cheek piece. Rrs arca rail.

Add 13in handguard for an extra $250

$1350 shipped Apple Pay pp ff venmo zelle

WTS/WTT:

1 case Berger Hybrid Long Range Hybrid Target 6.5 Creedmoor 144gr JHP Rifle Ammo - 200 Rounds - same lot.

$400.00 shipped

Trades for 6 ARC ammo, 6 Creedmoor ammo, 6mm bullets, etc.

Selling a few things i'm not using anymore:


L.E. Wilson .308 Expander Mandrel w/ .307 mandrel - SOLD

RCBS Hand Primer - SOLD

Giraud Tri-Way .308 Trimmer - SOLD



Payment via Zelle

Curious if anyome has any feedback on those 3 suppressors (all 30 cal).

Plan to use on 3 bolt guns, 308, 6.5 creedmoor, and 300 prc - would like to use it on an ar15 but it wont be a primary use.

I want one thats repeatable poi shift, decent suppression, and good recoil reduction.

Which is best?

Full length SRS A2 FDE Handguard off a new chassis. $175 shipped.

One of the last items I had laying around. These have been tumbled but are unprocessed. Been fired 5x and annealed after each firing, only seen a mild load of 105 hybrids at 2860.

190 total pieces for $65 shipped be a good spare batch for someone looking for some extra brass or just getting started

Zelle or cash app

We met in 3rd grade and were pretty tight until he passed away at age 47 late last year. He was stricken with severe MS, and was slightly better than bedridden for his last 2yrs.

Shortly before he was put in long term care, he had me gather all his firearms and store them at my house with explicit instructions that no one else was to be trusted with them.
He was single, no kids, and aside from a few distant relatives, no next of kin.


Anyhow, one of the pieces was a basic Springfield 1911 of mid 90s production. As a received it, it was in a state of him modding it, or at least had plans to refinish it.

It's missing the sights, and it appears he had removed the factory bluing, and had polished the slide and lower. Kind of a messy job, but he was deep into MS at the time, so no fault there. No clue what his intentions were in the end with it.
Functionality wise, it seems fine. No feeding or eje issues.

So, what I'd like to do is get it back complete again, with minimal mods, no desert tan finish, and no tactical nonsense.
Just refinshed with some decent sights. It won't be used in any role, basically just a rememberance of him.

I'm wondering about the finish. I'd like a basic, matte blueing. I have access to a sandblaster in my shop and was considering doing the blueing myself. Anyone think this is unwise? Any tips? I do NOT want a flawless finish as it has some charcter to it with minor dings and such from him carrying it in his truck for decades.