I recently received an older used Sightron SIII series scope. It has [per label] 0.125 MOA adjustments and is configured with a Mil-Dot Reticle. Since the manufacturer produced it this way, I assume there is some valid reason for this configuration.

1. What is the reasoning for this type of thing?
2. Are there any good references for getting the most out of this configuration?

Thoughts?

Tikka T3X Lite Roughtech 7rem mag.
Have it cross posted in GB. Looking to consolidate some projects.

$875 shipped to your FFL from an individual.

Been working on reloads for a 6.5CM.
First ill say I am still new with a lot of this and this is a hunting rifle. Not a precision rifle or a really super high end rifle either. But one that I do enjoy to shoot and hunt with.

Finally starting to get somewhere with help from one of the members here. Has been a huge help.
But I also have another question.
When you head to the range and start shooting. Do you start out cold. and record those groups.
Or do you run some sighters or foulers through the gun to get some heat in it before shooting groups for recording data?

The reason I ask is the 3 charge groups I shot last night all were somewhat consistant.
But the first group the first shot I made went low and opened the group up.
taking that one shot out the group and mean radius of the group would be much much smaller.
So just got me thinking if I should run this group again to see what it does if the rifle has some heat in it first.
Here is my original target.

Here is the same target with the 1st target shot dropped. Which was the first shot made with the rifle cold.

Right now just trying to get a charge weight found so I can start working on seating depth tests to see if I can get a smaller group.

Hiding in a deep holler under a natural limestone outcrop with food and water .

No that part is a joke - he was in Woodbridge VA just south of DC. Had no reason to hide until now

If anyone is considering letting go of their Pork Sword I’m in the market. Looking for one here before I go order one new direct. Let me know what you have…

Looking to sell a Remington 700 SA Stainless bolt. It is for a 300wsm. I believe is .532 bolt face. No ejector, ejector spring or firing pin assembly. Came from a rifle a switch over to a .308 bolt

Looking for $200 SOLID

Read down to the end of this... and note Alina Habba's statement that "The congress created federal courts, we can defund them."

So if you are a federal judge (or a circuit court) that is passing activist rulings, playing fast and loose with the law, then you could be either dissoved by Congress or de-funded in the budget.

Trial balloon? Serious strategy? This one Obama-appointed judge who suddenly is throwing sand in the vaseline of the will of the American People... might find himself de-funded or his court entirely dissolved!

Note, too, that the Congress is trying to go on an extended Easter Recess... without finishing up Trump appointments. This includes judicial appointments, which need to continue moving forward. More delay, obfuscate and drag out... while trying to act all "We love America."

Checks and balances come in many flavors! And while the Constitution creates a judiciary branch overseen by a Supreme Court, the makeup of that judiciary branch (and the funding of it) is the work of the other two branches! So Executive and Legislative... get your asses in gear and reform the judiciary that has been weaponized for the last 25+ years (arguably the last 60+ or even the last 90 years) against the Constitution, the other branches and the American people.

Tick Tock folks... don't have forever to solve this before the commies go full commie!

Sirhr

PS. Note that she also recognizes that "People are tired of investigations... they want arrests. We need to make arrests. Not just investigate with no consequences. " Yup. This. With no consequences, we have no judicial system. Just a big roadblock that lets some people get away with murder while targeting others for destruction. All in plain sight with no consequences. Time for that to end. At least someone in .Gov is now saying it out loud!

You know the deal. used, well loved, works great.
decided to upgrade to a garmin and its now just sitting here.
only variance from new ones is that i threw away the cheapo retractable real wire and bought a spare fixed lead.

120 shipped. paypal F&F

Aero Solus Hunter rifle in .308. 20” fluted Ballistic Advantage barrel has 120 rounds through. Carbon Fiber AG composites adjustable hunter stock with Area 419 rail installed. Trigger tech field trigger. Will also include BNIB 20” Proof CF origin/solus prefit in 6.5CM and BNIB Solus action wrench. $2500 shipped.

Scope and suppressor not included.

Hi friend
Eotech and mount for $550 ship.
like brand new, without any issue just use it once at the range.
Payment accept: Vemo, Paypal,Zelle
any question 310-357-6026
thanks

Looking for a Gen 1 or 2 magpul PRS stock in black or FDE for the AR10 or AR15. Not looking for any other versions.

Excellent condition. Just a couple range trips, never hunted with.

Nightforce ATACR
5-25x56
MOAR
F2
C553

$2000 scope only
$2140 scope and NF rings (A223, 1” height)

I need to read the site rules about where to post this. Hint it’s the PX and you need to be a supporter.

MDT scope mount 34mm low 1.18in
$225 Shipped

Minimally used Frankford Arsenal X-10 progressive

Comes with shell plates for 9mm and 223. as well as an extra toolhead, Case feeder, and any other little tidbits that came with it.
It is also mounted on an Inline Fabrication quick change plate

$800
LOCAL PICK ONLY
no shipping

Trades: sealed 8lbers of H4350

SOLD

Ninjas are mostly free and unoppressed.....

Lightly used DMR 3 with G4P reticle, comes with factory box $925 shipped PP f&f

Please PM for contact. PayPal Gift or cover fees ONLY.

Make a reasonable offer.

Blackhawk Tactical Patrol Pack 60PP00, Used in great condition, no rips or tears, all the buckles works and nothing is broken. Coyote - SOLD​

More info here: https://www.gear-illustration.com/2019/08/12/blackhawk-patrol-pack-woodland/

Looking at prefit barrels free bore options seem to be numerous. 1 maker is .130, another offers both .150 and .185. I’m guessing that bullet selection drives the choice, but how do you decide when just starting out?

Curious as to where our “nicer tech” toys come from.

Not really including presses, dies and the like related to machining…

Scopes, we all know where they come from…

——————————

The AMP Annealer and Press: New Zealand

ARC Precision Ultimate Annealer: South Africa

Labradar: Infinition Inc of Trois-Rivieres, Quebec, Canada

Garmin Xero C1: USA - but incorporated in Switzerland (?)

MagnetoSpeed: formerly MagnetoSpeed LLC, USA - now under Nielsen-Kellerman Company, USA

AutoTrickler and Shotmarker: MacDonald Innovations, Canada

SuperTrickler: Modgunn Security ApS, Denmark

Ingenuity Trickler: USA

Kestrel Meters: Nielsen-Kellerman Company, USA

Teslong Borescopes: Shenzhen Teslong Technology Co., Ltd., China

Safran Vectronix: Safran is French, Vectronix is / was Swiss…

TriggerCam: South Africa

Wind Zero: Probably USA

——————————

Gordon's Reloading Tool: Germany

QuickLOAD: Germany

——————————

It’ll be interesting to find out where they’re actually manufactured, too.

For instance, the Kestrel’s said to be entirely U.S. - made, while the Garmin’s made in Taiwan…

Anything else to add?

Im in the market for a whole new precision setup. I've only previously reloaded straight wall pistol on a 650 so this is process I've never had to implement.

An annealer is one piece of the puzzle that I am planning on getting. Particularly the AMP Anneler.

Just saw this being listed on a few reloading vendors.

ARC Precision Ultimate Annealer​

Login to view embedded media
Anyone have any feedback on this unit? Exciting times these days.

For sale these are all brand new:

1. Area 419 Zero Turret Head Hybrid 7/8" and 1 1/4" - $120
2. 6.5 Creedmoor M Series Die Sleeve and Mandrel Kit - $90
3. 6mm GT M Series Die Sleeve and Mandrel Kit - $old

No trades, I accept PayPal Friends and Family and USPS Postal Money Orders. Please see my feedback, many happy customers.

Got had by Bluewave, Lonnie Arp, [email protected]

This is on me, he had no feedback, but had a few posts on here, Talked with through text and on here, got pictures with requested things written on paper with two diff. pens.

Beware..... Guy Ghosted me and won't return any messages on here or text......

Anyone have experience with the Noveske switchblock, particularly in a large frame ar 10 style rifle? If so, curious what suppressor you used and what the gas was like between suppressed and unsuppressed use.

Thinking of getting the 20” 6.5 creedmoor barrel: https://noveske.com/products/20-switchblock-barrel-6-5-creedmoor-w-headspaced-bolt/

Thanks