WTT/WTS:

Hornady: TAP Precision® .300 Winchester Magnum, 178gr ELD® Match​

4 2 x 200 round cases (same lot) - $350 per case Sold!
1 x 180 round partial case (same lot) - $300 Sold!


Trades: Looking for 6 ARC ammo, 6 creed ammo, Bartlein 6mm blanks (CF, MODBB), Proof CF 6mm Blanks, etc

I just purchased the new 2025 6.5 CM Ruger Precision Rifle.

https://www.riflegear.com/p-24542-r...er-precision-65cm-24-rifle-smoked-bronze.aspx

It's in jail now so I'm spending my time trying to decide what optic to buy for it. After extensive research I've narrowed it down to either the Vortex Razor HD Gen2 4.5-27x56 or Athlon Cronus BTR 4.5-29x56 APRS6. I like the Razor because I already have the 3-18x model on my 6.5 CM Aero Precision M5E1 gas gun.

The Althon Cronus BTR is $1329.00 on Optics Planet.
https://www.opticsplanet.com/athlon...56mm-riflescopes-w-aprs6-ffp-mil-reticle.html

The Vortex Razor Gen2 is $2058 on Optics planet with a 10% discount on Optics Planet.
https://www.opticsplanet.com/vortex...x-razor-hd-gen-ii-4-5-27x56mm-riflescope.html

Both scopes are made at the Light Optical Works in Japan.
https://sageratsafaris.com/light-op...sageratsafaris.com/light-optical-works-japan/

So I'm assuming that they both have the same build quality, Glass quality, fit and finish etc. I'm leaning towards the Vortex because of my familiarity with it and I also like the locking L-Tec turrets that allow you to dial 5 clicks beneath the Zero however the Athlon Cronus is considerably cheaper. Also. I've always used MOA scopes. I've decided that the next one will be MRAD because I want to get into long range PRS and I'm told that MRAD is better for that.

I'm looking for opinions out there as to what the general thought is between these two scopes and also whether MRAD is actually better for long range PRS than MOA. I've always shot a MOA scope but this time I want to get out of my confort zone and learn MRAD. If anyone has switched from MOA to MRAD let me know your experience. I look forward to hearing your opinions.

Got out before the rain and ice . Been jonesing for a long scenic ride .

SOLD….250$…. Will send pic of code for you to use after payment

Around 600 in the cart. Wasn’t in the market but sure is tempting

So after searching this forum and elsewhere online, and basically finding no source of information on this, I figure let’s start a thread on the apparently VERY little known M83 sniper rifle, built by NSWC Crane for the Navy SEALs sometime in the 1980s, before the M86.

I will share the little information I have been informed about, and let others with actual direct or otherwise knowledge share what they wish, including any photos of either actual or clone M83s.

From what I have gathered, the M83 was built in-house at Crane and consisted of the following specs:
- Remington 700 short action chambered in 7.62 NATO, mostly with the ADL blind magazine box
- McMillan silhouette stock in early desert smear camo (with the green)
- Custom made scope base with 30mm Leupold & Stevens Ultra rings
- Either an L&S Ultra 10X with M1 turrets, or a Bausch and Lomb 10X Tactical scope

And of course this all centers around what is usually my favorite part of a build, the McMillan stock. Below is a mostly exact same stock as used on the M83, with the exception of a different butt pad (but that can be easily fixed).

I've recently gone down a rabbit hole of a project I'm throwing money at. Selling the last (3) bricks of Lapua Center X for $500.00 shipped and insured.

Not interested in trades.

Payment via PayPal friends and family with no note.

Please do not ask me to ship where prohibited and know your local laws/regulations.

The ammo purge of stuff I'm no longer using continues:

I've got a case of Federal Gold Metal Match 260 Remington 142 SMK, $330 shipped

Trades: 6ARC or 6CM Ammo, 6mm projectiles, whatever...

I have two like-new Harris bipods that I've owned for several years and never used. They've been attached to rifles in my safe, but never been outside of my house. No marks, dents, rust, etc. I've converted my rifles from sling-stud to Picatinny attachment and won't be able to use these.

1) SOLD Harris bipod model 1A2-L (pictured on the left). Extends 9"-13", smooth legs, non-swiveling, sling-stud attachment. Made in USA. $70 shipped.

2) SOLD Harris bipod model S-BR. Extends 6"-9", smooth legs, swivels (tilts) to compensate for uneven terrain, solid base, sling-stud attachment. Made in USA. $95 shipped.

Payment via PayPal FF or USPS MO. PM me if interested.

ISO Spuhr 4802 or 4602

Hey guys, I'm converting my mid-length gas system 16-in AR to run an 18-in barrel with a rifle length gas system. I'm no expert at this so I want to run this by you guys to make sure I'm on the right track.

I was doing a little reading last night and it sounds like I may be able to get away with my original buffer and spring and just tune it with a adjustable gas block? I was going to run the riflespeed adjustable gas block. Then if there's any trouble I could always mess with the buffer weights. Does it sound right?

Lightly used Vortex Razor AMG 6-24x with the floating dot EBR7b reticle. Excellent condition other than some slight marring on the elevation turret cap.

Turrets, glass and parallax all flawless.

Comes with original packaging, l Tec tool, caps, sunshade, mkm throw lever and level.

$1550 shipped and insured
PayPal F&F, Venmo or Zelle

Would trade for a ZCO 4-20x or NX8 4-32x mil c

Hi-My names Aaron, long time lurker and obsessive learner (this site is great for that.)

Took a 30 year break from shooting rifles on the regular to raise a family and start and sell some businesses. Had to sacrifice most of my personal obsessionsexcept fly fishing and golf. I’m now ready to spend more time doing the things I loved as a younger man. PRS is at the top of my list.

Thanks in advance for your patience for any “new-guy” questions.

Selling a Premier Heritage 3-15x50 LT scope with illuminated Gen 2 mil dot reticle. The scope is in great condition, no issues and includes box, manual and original Premier caps. Glass is phenomenal.

$2000 shipping included. PayPal FF preferred but can accept others if need be. If you have any other questions or need more pics/video, let me know.

No trades.

Anyone on here designing and 3D printing that could make me a box to store batteries for night hunting? I’d like it to be flat with a slide-off or hinged lid.

I’ve poked around here for a bit. I generally shoot to hunt but have some buddies interested in trying out NRL Hunter matches so maybe I’ll branch out.

The optics reviews on here have been so helpful for someone like me that’s inexperienced. Looking forward to learning more!

Manners CZ 457 stock

Ambidextrous (professionally milled to accept left handed actions)

Only used maybe three times.

$760 +

PPFF, Venmo Gift, Zelle

*SOLD

WTS: Triggertech Special Remington 700 flat face trigger. Without bolt release. Lightly used. $175 shipped. Venmo or paypal f/f.

Login to view embedded media
So Sonya is murdered in her house for invoking the name of Jesus - shot in the face multiple times by a cop who was in her house illegally.
The tax payers get to pay $10 million because the city kept a phycological nut case Brady lost officer on the payroll .

Seem it would be cheaper and less deadly just to fire pieces of shit before they commit murder on camera ?

Selling my SLR B36 large frame AR receiver set. Has the take down pins, mag release and bolt release installed.

Asking $300

So I have a Short Action Customs scope leveling base. That I mount my scope and spur mount to the base. The base is level as well as the spur mount. I put a plum line about 50 yards out in my yard. Now the scope reticle runs along the plum line but at the top of the reticle it looks like it’s on the center of the line and on the bottom of the reticle it looks like it’s on the left side of the line. Almost like a tiny Bit of an offset . I had to set it there so that when track my scope from zero to all the way, as far as it will track it stays on the line. Would that be more important or should I get the reticle to line up perfectly with the plum bob? Thanks Jimmy

Also, this is a brand tangent Theda 7 x 35, I would hope it’s tracking

Price includes shipping.

If paying by check, must clear before shipping. I have PayPal and Venmo ,you cover fee if you chose secure PayPal

I’d also be open to trading for 30 cal bullets around 200 grain
Or 7mm 162’s



Berger 7mm 195 1000 count

SOLD $525 SOLD

I can also break it up, 6 of the one lot for $325 shipped 4 of the other lot for $225 shipped



SOLD

Selling some stuff that I found after my recent move. All prices are shipped.

1- Vltor Scar receiver extension- $100
2- Surefire SFMB-762 M18x1- $100
3- Rugged SCAR 17 Flash Hider- $55
4- B&T QD Vert. Foregrip FDE- $50
5- Nordic Components 4x4- $65
6- Vortex Pro Series 30mm Low Ring- $35

I don’t see much information hear about them, I have a lane scorpion King SST .30, I met Corey at a match and saw team LRI using them, But not much here on them. Am I missing something?

Mitutoyo Coolant Proof Micrometer Set Ip65 293-961-30 - $995 Shipped and Insured in CONUS

Paypal F&F or Zelle preferred, no trades.

Mitutoyo 0 to 4" Range, 0.00005/0.001mm Resolution, IP65, 4 Piece Electronic Outside Micrometer Set, Ratchet Stop Thimble, Carbide Measuring Face

Product Identifiers

Brand - Mitutoyo
MPN – 29396130
UPC - 4946368673196

Product Key Features

Resolution - 0.00005 in/0.001mm
Micrometer Type - Outside Micrometer
Minimum Measurement - 0 in
Maximum Measurement - 4 in
Reading - Electronic

0-4 In/0-101.6mm, .00005 In/0.001mm, IP65 Digimatic Outside Micrometer Set, 4 Micrometers, 3 Standard Bars, With SPC Data Output, Ratchet Stop

DESCRIPTION

Mitutoyo 293-961-30 Micrometer 0-4"/0-101.6mm Set features the electromagnetic ABSOLUTE sensor, improving resistance to environmental conditions such as dirt, oil and water that can cause false readings. Included in the set are 4 pieces 293-330-30, 293-331-30, 293-332-30, 293-333-30 3 standard bar in the wooden box. 00005"/.0001mm, Standard Bar Measurement data output function is available with a water-resistant connection cable. Auto power ON/OFF function. Certificate of inspection is included.

These have been used very little and were never used in a shop environment, i.e., no dirt, grease, grime, scratches, etc. These sets sell new for right around $1,400. I will cover shipping and insurance in CONUS.