Looking to sell this brand new Romeo X Pro. It has a deltapoint footprint. Decided to get a Romeo 2 instead.

Asking $350 shipped and insured.

I have 109 confirmed trades on Reddit GAFS username AlternativeStation29. Item is crossposted so it may sell elsewhere first.

Payment via paypal FF no notes, zelle, cashapp, or venmo.

If you want it comment and then message me.

To catch people up on the news, Geissele was awarded the contract for the sniper variant. They are currently still competing for the Assaulter variant but it has yet to be awarded. In the video, the mil requirement was 1 MOA. They test every rifle that ships and the first 50 tested an overall average of .56 MOA.

SOCOM selects Geissele

First Shipment

With the recent explosion of 2011 pistols, I am curious if there is a strategy of making these pistols field reliable while maintaining decent accuracy? These seems to run on the ragged edge of spring strength for cycling, the 1911 style trigger seems to be a failure point for grit/silt preventing reset and the mags don’t seem to tolerate anything that would slow the stack from moving, causing no loads or failures to go into battery.

These pistols are awesome on the flat range, but has anyone developed one to be field reliable? Or a protocol for making them field reliable?

For Sale: Bolt TL-35 V2
One month old
3x base mag
384 resolution
Bought brand new for use as a buddy scope
Incredible resolution for a 384
Comes with all factory accessories

$2,275.00 shipped conus.
Larue mount not included

Bighorn medium origin action, proof 26 inch carbon barrel, AG privateer stock (not bedded) Triggertech trigger, Hawkins precision detach bottom metal. Mag is for PRC so either needs opened up or order a standard. Little loose. 95 lapua brass or so. Have right at 3,300 in parts as is. Everything brand new except barrel and it’s under 100 rounds.
Would like 2,900 shipped.

Also have a medium action XLR element 4.0 chassis with all weights and a 26 inch PVA 7/6.5 PRC barrel and a good amount of brass and bullets. So can mix match or make a deal for it all and have 2 rifle setups for cheap. I’ll make a great deal for it all.

Eberlestock X1 Euro in green Loden color. Used maybe twice. Just pulled out of storage. Good condition. $180 shipped.

Spuhr SCP-3000 30mm mount with small/short accessory pic rail. $200 shipped. PP FF or Zelle.

Mounted and then taken out.

$100 shipped

Selling a near alpha mount. 34mm. Cleared my gen 2 razor on my ARC mausingfield with mtu barrel. Comes as seen.

$260
Shipped

Velocity Systems Low-Vis Blow-Out Kit, Coyote, NEW WITHOUT TAGS, (IFAK), Helium Whisper, $60 shipped, DISCREET Paypal F&F or Zelle, NO TRADES, thanks.

Looking for a short action gen 2 Remington footprint in tan

Selling an arca rail for a PRI gen III handguard. Which are the Mod 0 and H from Precision reflex.

Cut to the profile of the tube and utilizes the hole pattern in the tube for mounting. 6061 black anodize.

Comes with mounting hardware and mounting strip. Just remove the picatinny sections and heat shield.

$130 shipped to you.

Items added 5/4. Zelle or Venmo only. All orders add $10 shipping.

Vortex Pro Series 30mm 1.54” extra high rings. Cosmetic signs of use and wear, but fully functional, all fasteners included, allen key is not included. Torque values are conveniently laser engraved on them from the factory. $40


Surefire/Geissele bore alignment rod, 6.5 caliber. $45


- TAB gear rear bag. Approx 7x5 inches, OD green. Great condition, no wear or tears. $18


- Unkown brand cylindrical rear bag, approx 7” long x 4” wide, Kryptek Highlander. Great condition, no wear or tears. $18


-Rifles Only HAD suppressor cover, Woodland camo outer cover. Great condition. 6.25” long. Perfectly fits HXWRX 762 QD, for example. $65 *SOLD*


Magpul MIAD grip, black, excellent condition with mounting hardware and bottom cover. $8

Login to view embedded media
Looking for $2750 shipped.

3 - 100ct boxes, will not separate. 125tyd

As the title states. In good shape, no issues whatsoever. Includes accessories as shown in pictures.

$900 shipped insured.

Please no “I’ll take its”, PM instead.

Masterpiece arms Matrix pro in gray .
Included is full set of internal weights
2 external Gray Ops steel weights .
Bag hook
Thumb shelfs
Two round holder
Swept grip
Finger shelf’s
Also including the finger timer shown in the photo with mount
Stock has some marks on it from use ,see the pics for exact condition .

1250 shipped TYD insurance on buyer .
Pay pal friends and family or Venmo

Been on these forums for many years...first time ragging in the Bear Pit- but I'm pissed, and I know there's a lot of current and former US military that might care about who to support with their business- or not.

My son's a USAF pilot currently stationed in the midwest, just came home to visit in FL for a couple of weeks on leave.
In addition to all his other modern rifles, he's building a nice milsurp collection. We always do some shooting and fishing when he gets back home, and he had an eye for a WWII Mosin PU sniper and bought a nice one from an online dealer last week before leaving- and had it shipped to a local Shoot Straight here as he'd called them in advance to confirm they accepted transfers.

Picked him up at the airport last night, and this afternoon we drove down to pick up his rifle. Gave them his military ID and his new temporary DL as he just bought a home there and surrendered his FL DL- the temp DL is paper- but issued by the state, with photo, and is 100% legal, government-issued ID.

"Nope, sorry- can't do the transfer". We can't accept this temporary driver's license".

Now, I just surrendered my 07 FFL last month after 8 years due to moving and not having a new premises yet. Didn't do many transfers as a smith, but I know the rules of the game.

I said "What's the problem? His military ID is perfectly acceptable."
"We can't photocopy his military ID, and we can't accept his temporary DL"

Now, I'm trying to keep a cool head, which wasn't getting any easier. But knowing that an FFL can refuse to do a transfer for ANY reason- including if he doesn't like your fucking haircut- I tried to be diplomatic.

"His military ID is all he needs- and ATF does not require that you (illegally) make a copy. His DL is state issued, and a legal photo ID- even though he ONLY needs his military ID for compliance. These are YOUR requirements- and you can make any fucking rules you want- but you should have disclosed to him that your requirements for doing a transfer, exceed those which are legally required".

The dickhead manager pulled out a 4473 and gave me some bullshit about the forms changing (which they just did), but I pointed to the ID requirements and asked him "What's changed? Says in black and white that military ID is acceptable!" At which point he starts hemming and hawing with bullshit...

What's ironic is that he'd gone with some buddies to a NASCAR race in a neighboring state before flying home, stopped in a Bass Pro Shops and they happened to have milsurps on the rack (go figure..) and bought a nice Swedish Mauser using the same ID's that Shoot Straight refused to accept.

Figured I wasn't getting anywhere with him, and left to cool off. After the 20 minute drive home to cool down, I called back.
"Listen, I know you guys can do whatever the fuck you want, so screaming and yelling isn't going to be productive. This is how you treat those who serve our country? Are you kidding me? Can I speak with ownership?"

"Nope. It's our policy, and they won't make an exception".

So I call another FFL closer to me, less than 10 miles from Shoot Straight. Explained the sitch. "Yeah, no problem. I'll accept that ID".
Called Shoot Straight back. "It'll be $50 PLUS the shipping costs to send it to the other FFL".

No "Sorry we didn't disclose", No "Sorry about the inconvenience- we'll waive our $50 fee but he'll need to pay just the actual shipping costs".

FUCK SHOOT STRAIGHT- ALL THEIR FLORIDA LOCATIONS. I used to frequent their Tampa range on occasion- I won't set foot in their stores forevermore if this is how they treat our military.

Rant over. Act accordingly.

Hi,

Wanting to hear input on folks who have an Aero M4e1 upper with the built in barrel nut and enhanced handguard.

Specifically wanting to know if there is any POI shift when in positions other than prone. My current Vltor MUR upper/WOA handguard exhibits a .3mil low shift and .2mil right when shooting off a tripod/barricade and am considering the Aero enhanced or LMT MRP upper to solve this shift.

Thanks!

Burris Eliminator 5 rangefinding scope for sale.
Purchased from a fellow hide member who won it. I've never even mounted it. Very good condition - looks like new to me.
Has everything they come with new minus the $1970 price.
Reduced to $1470 plus buyer pays actual shipping/insurance

I guess there comes a time when we must all acknowledge the unstoppable marching of time towards being blind as fuck, I accept it.

There are a zillion damn red dots out there, a zillion mounting methods, it all looks to me like more shit to fail right when you might really really need it one day. I need a little help figuring out what to do here. My irons just arn't as sharp as they use to be and I'm sure in the next few years they will just be useless blobs out there. I wear contacts to correct my vision for distance and will be having lasik this winter.

1- I carry IWB 95% of the time, I'm also not a small man and can literally sweat through a shirt. Will an optic stand up to this daily?

2- I do run nods alot, would be cool if said red dot would work with them.

3- I have mostly glocks that I want to put optics on, my understanding is that direct milling a slide for an optic is superior to the glock MOS and plates..is this true? If so who to use for milling?

4- Irons? I'd like as uncluttered of a sight picture as possible, is a single front post and using the optic as basically a giant ghost ring if the optic dies a thing or not?

Thanks for the input amigos.

IC helmet bridge for sale. D-14 dual mount with 1 PVS-14 arm and dovetail.
Like new condition.
$400 or best reasonable offer.
Buyer pays actual shipping/insurance cost.
PPF&F preferred

Steiner C-35 Thermal Clip On
Function checked with well under 1 hr of use - never fielded.
Will ship with 6 Panasonic batteries and all original charging cords/charger, wrench etc.
Price reduced to $2550
Possible trade for Nox 18 plus $.

Final price drop
Shepherd dual reticle 6-18x42 scope for sale.
9" preset circles to frame and fire out to 1000 yards. Works on 5.56, 270, 308, 3006 and more. See pic.
Cost over $900 new.
Used less than 50 rounds.
$350 with rings or make me a reasonable offer.
PPf&f preferred.
Buyer pays actual shipping/insurance costs.

SIG KILO 10k ABS HD binoculars for sale. Essentially BNIB.
Bought them, put the battery in to look through and range the hill back of my place. Pulled the battery. New condition.
Building a house, so selling a bunch of my stuff.
Price drop to $2100.
PPF&F is preferred
Buyer pays actual shipping/insurance